February 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Feb 1 01:04:30 CET 2006
Ending: Tue Feb 28 19:18:09 CET 2006
Messages: 563

• [sdiy] Re: [AH] Weird Polysix problem, all LEDs on....help!   Synthusiast
• [sdiy] DACs for Arp-style quantizer   harrybissell
• [sdiy] EL wire = opto compressor?   Amos
• [sdiy] Wondering as to the history of an unusual edp wasp?   Julian
• [sdiy] Wondering as to the history of an unusual edp wasp?   Richard Wentk
• [sdiy] DACs for Arp-style quantizer   harrybissell
• [sdiy] Roland CN-20 midi music entry pad   geoff james
• [sdiy] DACs for Arp-style quantizer   scottnoanh at peoplepc.com
• Resolved: [sdiy] 555-based ADSR that refuses to work with 9v   Karl Ekdahl
• [sdiy] Wondering as to the history of an unusual edp wasp?   Julian
• [sdiy] DACs for Arp-style quantizer   anthony
• [sdiy] contest idea   Scott Gravenhorst
• [sdiy] Oakley Stuff   Oakley Sound
• [sdiy] Wondering as to the history of an unusual edp wasp?   anthony
• [sdiy] contest idea   rude66
• [sdiy] contest idea   jbv
• [sdiy] contest idea   Luís Marka
• [sdiy] contest idea   harrybissell
• [sdiy] J-wire type contacts for a wasp deluxe?   Julian
• [sdiy] J-wire type contacts for a wasp deluxe?   Mike
• [sdiy] sample & hold   Pat Kammerer
• [sdiy] J-wire type contacts for a wasp deluxe?   Oakley Sound
• [sdiy] J-wire type contacts for a wasp deluxe?   Vanden Berghe, Dirk
• [sdiy] sample & hold   Ian Fritz
• SV: Re: [sdiy] contest idea   Karl Ekdahl
• [sdiy] sample & hold   Rykhaard D.A.M.I.A.N.
• [sdiy] sample & hold   Scott Stites
• [sdiy] sample & hold   Ian Fritz
• [sdiy] sample & hold   James Patchell
• [sdiy] pcb mounting hardware   asfi at eol.ca
• [sdiy] sample & hold   Ian Fritz
• [sdiy] SMD ceramic caps are microphonic   Grant Richter
• [sdiy] SMD ceramic caps are microphonic   Paul Perry
• [sdiy] Re: Re: pcb mounting hardware   Colin Hinz
• [sdiy] transistor selection question   Jim Bob
• [sdiy] Log and Lin Controls in a DIY synth - Where to use?   jure zitnik
• [sdiy] vector patch boards   Pat Kammerer
• [sdiy] Log and Lin Controls in a DIY synth - Where to use?   megaohm
• [sdiy] Log and Lin Controls in a DIY synth - Where to use?   megaohm
• [sdiy] Log and Lin Controls in a DIY synth - Where to use?   Tim Parkhurst
• [sdiy] FM bass - most popular algorithm   Andreas Gaunitz
• [sdiy] popping a cap into a VCO   john mahoney
• [sdiy] popping a cap into a VCO   megaohm
• [sdiy] Renee Schmitz ADSR Circuit #2   Chris Manders
• [sdiy] rwilson sample hold HELP   Jim Bob
• [sdiy] memorymoog/P5 midi upgrades?   Barry Klein
• [sdiy] rwilson sample hold HELP   Ian Fritz
• [sdiy] rwilson sample hold HELP   Jim Bob
• [sdiy] transistor selection   Paul Perry
• [sdiy] popping a cap into a VCO   harrybissell
• [sdiy] transistor selection   harrybissell
• [sdiy] popping a cap into a VCO   Jason Proctor
• [sdiy] Potentiometer: 10k Audio taper, PCB mount, D shaft.   Stephen Harrison
• [sdiy] Renee Schmitz ADSR Circuit #2   Louis van Dompselaar
• [sdiy] FM bass - most popular algorithm   Andre Majorel
• [sdiy] rwilson sample hold HELP   Rutger Vlek
• [sdiy] FM bass - most popular algorithm   Dave Kendall
• [sdiy] Verbos Buchla 258 VCO Debug Help   Romeo Fahl
• [sdiy] anyone ever built an Ebow?   Colin Raffel
• [sdiy] FM bass - most popular algorithm   Andreas Gaunitz
• [sdiy] Matrix FX module   JH.
• [sdiy] whats your favourite modern pnp transistor?   Roy J. Tellason
• [sdiy] OTT: information   dustin sedlacek
• [sdiy] FM bass - most popular algorithm   Tim Parkhurst
• [sdiy] whats your favourite modern pnp transistor?   Jay Schwichtenberg
• [sdiy] Synthi A repair and modifications by Robin Wood at EMS?   beschaving at gmail.com
• [sdiy] It has been a month, my synth is done   Colin Raffel
• [sdiy] Schaeffer/Front Panel Express?   Pete
• [sdiy] FM bass - most popular algorithm   Aaron Lanterman
• [sdiy] Schaeffer/Front Panel Express?   Ryan Williams
• [sdiy] Uh oh ....... possible, assistance?? Sequencer .......   harrybissell
• [sdiy] Schaeffer/Front Panel Express?   mark verbos
• [sdiy] Uh oh ....... possible, assistance?? Sequencer .......   mark verbos
• [sdiy] memorymoog/P5 midi upgrades?   Oakley Sound
• [sdiy] Schaeffer/Front Panel Express?   Grant Richter
• [sdiy] Schaeffer/Front Panel Express?   Grant Richter
• [sdiy] 4069 CMOS VCO Trouble-Shooting   Scott Gravenhorst
• [sdiy] popping a cap into a VCO   Oakley Sound
• [sdiy] Electronica EM-17 VENTA for sale   mikas paukstis
• [sdiy] 4069 CMOS VCO Trouble-Shooting   René Schmitz
• [sdiy] Schaeffer/Front Panel Express?   ASSI
• [sdiy] paint type used for screenig pannels?   megaohm
• [sdiy] paint type used for screenig pannels?   Tom Arnold
• [sdiy] Sequencer - "Human Feel"   Tim Parkhurst
• [sdiy] Sequencer - "Human Feel"   Richard Wentk
• [sdiy] Synth-DIY UK weekend - July 29/30   neil.johnson97 at ntlworld.com
• [sdiy] paint type used for screenig pannels?   Tom Arnold
• [sdiy] Fans [was: Standalone PC synths]   David Cornutt
• [sdiy] Sequencer - "Human Feel"   Tim Parkhurst
• [sdiy] It has been a month, my synth is done   Colin Raffel
• [sdiy] Easy-to-interpret example of triangle VCO?   Aaron Lanterman
• [sdiy] Commercial 1v/octave keyboards?   NATE!
• [sdiy] Buchla 258   mark verbos
• [sdiy] The first real sequencer wav file from Woody, is up. :)   Rykhaard D.A.M.I.A.N.
• [sdiy] Uh oh ....... possible, assistance?? Sequencer .......   Rykhaard D.A.M.I.A.N.
• [sdiy] Need 2N4288 or sub for VCS3   Roy J. Tellason
• [sdiy] Need 2N4288 or sub for VCS3   Scott Stites
• [sdiy] Commercial 1v/octave keyboards?   Tom Arnold
• [sdiy] Commercial 1v/octave keyboards?   Dave Magnuson
• [sdiy] Commercial 1v/octave keyboards?   Tom Arnold
• [sdiy] Need 2N4288 or sub for VCS3   Tony Kalomiris
• [sdiy] DIY Kenton Plugstation? or simmilar hsot for yamaha PLG?   Danjel van Tijn
• [sdiy] Commercial 1v/octave keyboards?   Chris Manders
• [sdiy] DIY Kenton Plugstation? or simmilar hsot for yamaha PLG?   Alwyn Lloyd
• [sdiy] Commercial 1v/octave keyboards?   WeAreAs1 at aol.com
• [sdiy] Buchla 258   Grant Richter
• [sdiy] anyone got a spare edp wasp keyboard sticker?   Julian
• [sdiy] Buchla 258   elmacaco
• [sdiy] DIY Kenton Plugstation? or simmilar hsot for yamaha PLG?   Oakley Sound
• [sdiy] Schematic request please - ASM1 VCO with Triangle output (Ultra?)   Louis van Dompselaar
• [sdiy] audio op amp replacement   phil macnutt
• [sdiy] audio op amp replacement   anthony
• [sdiy] audio op amp replacement   Oakley Sound
• [sdiy] RE: [sdiy] EFM Seq-2A   Dave Magnuson
• [sdiy] DROID3, Another AVR Synth?   Gorka Garcia
• [sdiy] Jungle Mutant Filter Sample and Stuff   Scott Stites
• [sdiy] Three questions for you Synth Experts   Chris Manders
• [sdiy] audio op amp replacement   Rob Keeble
• [sdiy] DROID3, Another AVR Synth?   Gorka Garcia
• [sdiy] DROID3, Another AVR Synth?   Keith
• SV: [sdiy] Pc Oscilloscope   Karl Ekdahl
• SV: [sdiy] DROID3, Another AVR Synth?   karl dalen
• [sdiy] RE: [sdiy] EFM Seq-2A   Tom Arnold
• [sdiy] RE: [sdiy] EFM Seq-2A   Eric Brombaugh
• [sdiy] Three questions for you Synth Experts   scottnoanh at peoplepc.com
• SV: Re: SV: [sdiy] Pc Oscilloscope   Karl Ekdahl
• [sdiy] Pc Oscilloscope   Ray Wilson
• [sdiy] unsub   Amos
• [sdiy] AVR programmer   Ryan Williams
• [sdiy] Cool 'ring modulator' schematic   Tim Parkhurst
• [sdiy] Lowest prices, japanese transistor pair sources, etc.   Aaron Lanterman
• [sdiy] Cool 'ring modulator' schematic   Jaroslav Lukes
• [sdiy] unsubscribe   ChristianH
• [sdiy] Re: Pc Oscilloscope   Samppa Tolvanen
• [sdiy] AVR programmer   Tom Arnold
• SV: [sdiy] DROID3, Another AVR Synth?   Rainer Buchty
• SV: Re: SV: [sdiy] DROID3, Another AVR Synth?   karl dalen
• [sdiy] Flash data lifetime, was:DROID3, Another AVR Synth?   Ingo Debus
• [sdiy] GOOD SYNTH DESIGN BOOKS   Aaron Lanterman
• SV: Re: SV: [sdiy] DROID3, Another AVR Synth?   Rainer Buchty
• [sdiy] EPROM/flash lifetime   Barry Klein
• [sdiy] New pics up. Small but .....   Rykhaard D.A.M.I.A.N.
• [sdiy] GOOD SYNTH DESIGN BOOKS   BrightBoy
• [sdiy] 1/4" jacks clarification   megaohm
• [sdiy] DROID3, Another AVR Synth?   ASSI
• [sdiy] 1/4" jacks clarification   Bob Weigel
• [sdiy] EPROM/flash lifetime   ASSI
• [sdiy] Another kit supplier disappeared   Eric Brombaugh
• [sdiy] weird voltage regulator problem / question   harrybissell
• SV: Re: [sdiy] weird voltage regulator problem / question   Karl Ekdahl
• [sdiy] Another kit supplier disappeared   Aaron Lanterman
• [sdiy] RE: [sdiy] GOOD SYNTH DESIGN BOOKS   Aaron Lanterman
• [sdiy] Another kit supplier disappeared   Eric Brombaugh
• [sdiy] AVR programmer   Carsten Tönsmann
• [sdiy] Another kit supplier disappeared   Eric Brombaugh
• [sdiy] unsubscribe   Synth
• [sdiy] (Slightly OT) - Help to repair Hameg Scope, Please   Chris Manders
• [sdiy] (Slightly OT) - Help to repair Hameg Scope, Please   Chris Manders
• [sdiy] RE: [sdiy] GOOD SYNTH DESIGN BOOKS   Matt Simpson
• [sdiy] Mounting PCBs   harrybissell
• [sdiy] RE: [sdiy] GOOD SYNTH DESIGN BOOKS   Grant Richter
• [sdiy] Aaron's lectures now online   Aaron Lanterman
• [sdiy] DROID3, Another AVR Synth?   ASSI
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Anthony Bisset
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Grant Richter
• [sdiy] Thomas Henry Books (was: Another kit supplier disappeared)   scottnoanh at peoplepc.com
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Dennis Verschoor
• [sdiy] This is possible a stupid question but ......   Rykhaard D.A.M.I.A.N.
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Grant Richter
• [sdiy] fixing the modular sequencer concept, epiphany & solution   john mahoney
• [sdiy] lm vs njm   harrybissell
• [sdiy] programmable synth module   john mahoney
• [sdiy] programmable synth module   Bahamut
• [sdiy] programmable synth module   harrybissell
• [sdiy] programmable synth module   Grant Richter
• [sdiy] programmable synth module   Tom Arnold
• [sdiy] programmable synth module   David Brown
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Paul Perry
• [sdiy] programmable synth module   Samppa Tolvanen
• [sdiy] programmable synth module   Richard Wentk
• [sdiy] programmable synth module   Tom Arnold
• [sdiy] programmable synth module   elmacaco
• SV: Re: [sdiy] DROID3, Another AVR Synth?   karl dalen
• [sdiy] programmable synth module   harrybissell
• [sdiy] programmable synth module   Daniel Kruszyna
• [sdiy] programmable synth module   Daniel Kruszyna
• [sdiy] fixing the modular sequencer concept, epiphany & solution   Anthony Bisset
• [sdiy] programmable synth module   john mahoney
• [sdiy] programmable synth module   john mahoney
• [sdiy] programmable synth module   harrybissell
• [sdiy] Forth (Re: programmable synth module)   john mahoney
• [sdiy] fixing the modular sequencer concept, epiphany & solution   harrybissell
• [sdiy] Cool 'ring modulator' schematic   harrybissell
• [sdiy] programmable synth module   harrybissell
• [sdiy] fixing the modular sequencer concept, epiphany & solution   john mahoney
• [sdiy] programmable synth module   Ken Stone
• [sdiy] Cool 'ring modulator' schematic   Andre Majorel
• [sdiy] programmable synth module   Andre Majorel
• [sdiy] programmable synth module   Andre Majorel
• [sdiy] programmable synth module   Dave Kendall
• [sdiy] programmable synth module   Samppa Tolvanen
• [sdiy] programmable synth module   Ingo Debus
• [sdiy] programmable synth module   David Brown
• [sdiy] Cool 'ring modulator' schematic   Ian Fritz
• SV: Re: [sdiy] DROID3, Another AVR Synth?   ASSI
• [sdiy] programmable synth module   Grant Richter
• [sdiy] programmable synth module   Grant Richter
• [sdiy] midibox (Re: programmable synth module)   john mahoney
• SV: [sdiy] Forth (Re: programmable synth module)   karl dalen
• SV: [sdiy] midibox (Re: programmable synth module)   karl dalen
• [sdiy] programmable synth module   Aaron Lanterman
• [sdiy] programmable synth module   NATE!
• [sdiy] Audio samples from TSLoT online   JH.
• [sdiy] replacement for DAC0831? I am building the following...   Paul Perry
• [sdiy] ring ? balance? 4 quadrant ?   NATE!
• [sdiy] Cool 'ring modulator' schematic   harrybissell
• [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Karl Ekdahl
• [sdiy] programmable synth module   harrybissell
• [sdiy] midibox (Re: programmable synth module)   Samppa Tolvanen
• [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Eric Brombaugh
• [sdiy] Weller WTCPT Question   Bob Devries
• SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Karl Ekdahl
• [sdiy] Weller WTCPT Question   James Patchell
• SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Karl Ekdahl
• SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Eric Brombaugh
• SV: Re: SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Karl Ekdahl
• [sdiy] Weller WTCPT Question   Ken Stone
• [sdiy] Weller WTCPT Question   Simon Brouwer
• [sdiy] DIN / MIDI socket error? Damage?   Paul Perry
• [sdiy] DIN / MIDI socket error? Damage?   Johannes Öberg
• [sdiy] Weller WTCPT Question   clark at andrews.edu
• [sdiy] DIN / MIDI socket error? Damage?   ChristianH
• SV: Re: SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending on RFI *only* if USB cable plugged in   Karl Ekdahl
• [sdiy] Weller WTCPT Question   Ken Stone
• SV: Re: SV: Re: [sdiy] ARGHHH - PIC detunes VCOs depending onRFI *only* if USB cable plugged in   harrybissell
• SV: Re: [sdiy] midibox (Re: programmable synth module)   karl dalen
• [sdiy] Weller WTCPT Question   KA4HJH
• Float vs Int (was: [sdiy] programmable synth module)   David Brown
• [sdiy] Analysis of Buchla 259 principal oscillator...   Aaron Lanterman
• [sdiy] Analysis of Buchla 259 principal oscillator...   Magnus Danielson
• [sdiy] VCS3 Meter   yves usson
• [sdiy] ring ? balance? 4 quadrant ?   jure zitnik
• [sdiy] Aaron's lectures now online   Eric Brombaugh
• [sdiy] Aaron's lectures now online   Ian Fritz
• [sdiy] Aaron's lectures now online   Jeff Farr
• [sdiy] simple noise gate circuit?   gregory zifcak
• [sdiy] programmable synth module   Michael Zacherl
• [sdiy] Analysis of Buchla 259 principal oscillator...   mark verbos
• [sdiy] simple noise gate circuit?   Colin Raffel
• [sdiy] simple noise gate circuit?   Tim Parkhurst
• [sdiy] simple noise gate circuit?   mark verbos
• [sdiy] programmable synth module   Eric Brombaugh
• [sdiy] simple noise gate circuit?   Paul Perry
• [sdiy] Thomas Henry books available soon   Tim Parkhurst
• [sdiy] programmable synth module   Aaron Lanterman
• [sdiy] Aaron's lectures now online   Aaron Lanterman
• [sdiy] Valentines day humor   dustin sedlacek
• [sdiy] Revision of Analysis of Buchla 259 principal oscillator   Aaron Lanterman
• [sdiy] 2nd Revision of Analysis of Buchla 259 principal oscillator   Aaron Lanterman
• [sdiy] Analysis of Buchla 259 principal oscillator...   Aaron Lanterman
• [sdiy] SSM2164 or THAT2180 as current switch in triangle core VCO?   Aaron Lanterman
• [sdiy] SSM2164 or THAT2180 as current switch in triangle core VCO?   Aaron Lanterman
• [sdiy] SSM2164 or THAT2180 as current switch in triangle core VCO?   jhaible at debitel.net
• SV: [sdiy] Bruce Haack   Karl Ekdahl
• [sdiy] Bruce Haack   Scott Stites
• [sdiy] LF357 as follower / departure from ideal opamp behaviour   James Patchell
• [sdiy] Bruce Haack   rkmoore at memphis.edu
• [sdiy] Bruce Haack   Bart Provoost
• SV: Re: [sdiy] LF357 as follower / departure from ideal opamp behaviour   James Patchell
• SV: Re: [sdiy] LF357 as follower / departure from ideal opamp behaviour   synth1 at airmail.net
• [sdiy] will an embedded sequencer send me to hell?   phil macnutt
• [sdiy] Bruce Haack   megaohm
• [sdiy] Help needed with ASM based VCO   jays at aracnet.com
• SV: Re: [sdiy] LF357 as follower / departure from ideal opamp behaviour   Ian Fritz
• [sdiy] will an embedded sequencer send me to hell?   John Speth
• [sdiy] programmable synth module   Grant Richter
• [sdiy] ADuC702x (Re: programmable synth module)   genie at netsynth.org
• [sdiy] Looking for public opinion on switches choice. :)   Ken Stone
• [sdiy] Looking for public opinion on switches choice. :)   Fredrik Carlqvist
• [sdiy] Looking for public opinion on switches choice. :)   Bart Provoost
• [sdiy] Looking for public opinion on switches choice. :)   Andre Majorel
• [sdiy] Looking for public opinion on switches choice. :)   jhaible at debitel.net
• [sdiy] polysix keyboard interface help   ChristianH
• [sdiy] polysix keyboard interface help   Colin f
• [sdiy] polysix keyboard interface help   Peter Ullrich
• [sdiy] Looking for public opinion on switches choice. :)   Rykhaard D.A.M.I.A.N.
• [sdiy] programmable synth module   Eric Brombaugh
• [sdiy] programmable synth module   Eric Brombaugh
• [sdiy] programmable synth module   Grant Richter
• [sdiy] ADuC702x (Re: programmable synth module)   Eric Brombaugh
• [sdiy] [FS] Some stuff   Dennis Verschoor
• [sdiy] polysix keyboard interface help   Samppa Tolvanen
• [sdiy] oh, and check out this 808!   gregory zifcak
• [sdiy] Problem with MS 20 filter.   Diogo Melo
• [sdiy] Analog waveshaping lectures up   Aaron Lanterman
• [sdiy] j201 nchannel jfet   Colin Raffel
• [sdiy] Re: ADuC702x (Re: programmable synth module)   Paul Perry
• [sdiy] Thomas Henry books available soon   Tim Parkhurst
• [sdiy] Re: ADuC702x (Re: programmable synth module)   Eric Brombaugh
• [sdiy] Re: ADuC702x (Re: programmable synth module)   Daniel Kruszyna
• [sdiy] Re: ADuC702x (Re: programmable synth module)   Tom Arnold
• [sdiy] Question on the VCF in Thomas Henry's Drum Cookbook ......   Rykhaard D.A.M.I.A.N.
• [sdiy] Analog waveshaping lectures up   mark verbos
• [sdiy] Analog waveshaping lectures up   Aaron Lanterman
• [sdiy] Analog waveshaping lectures up   Aaron Lanterman
• [sdiy] Analog waveshaping lectures up   Aaron Lanterman
• [sdiy] Small Bear Now Has THAT 2252 RMS Detectors   Scott Stites
• [sdiy] VCF cores using SSM2164   HOSHUYAMA
• [sdiy] Forget the shack   Ian Fritz
• [sdiy] Resistive band w. pressure sensitivity   Karl Ekdahl
• [sdiy] Strange old parts question...   Eric Brombaugh
• [sdiy] Strange old parts question...   Paul Schreiber
• [sdiy] Resistive band w. pressure sensitivity   Paul Perry
• [sdiy] CASIO DH-500   Doug Terrebonne
• [sdiy] Help needed with ASM based VCO   Ian Fritz
• [sdiy] 5 band colour code for tempco resistor?   Chris Manders
• [sdiy] 5 band colour code for tempco resistor?   Rykhaard D.A.M.I.A.N.
• [sdiy]RE: [sdiy] CASIO DH-500   rdrake
• [sdiy] Help needed with ASM based VCO   René Schmitz
• [sdiy] Help needed with ASM based VCO   Chris Manders
• [sdiy] Two Nuts & Volts articles from last year   Eric Brombaugh
• [sdiy] Help needed with ASM based VCO   Ian Fritz
• [sdiy] Two Nuts & Volts articles from last year   Eric Brombaugh
• [sdiy] Help needed with ASM based VCO   René Schmitz
• [sdiy] Help needed with ASM based VCO   René Schmitz
• [sdiy] 909 attack mod   gregory zifcak
• [sdiy] CASIO DH-500   Tim Parkhurst
• [sdiy] Help needed with ASM based VCO   Ian Fritz
• [sdiy] Two Nuts & Volts articles from last year   Peter Ullrich
• [sdiy] chaotic midi to dynsync conversion with a tb303   Philippe Schelté
• [sdiy] polysix keyboard interface help   Peter Ullrich
• [sdiy] Sknote "Real Thing" analog   Tim Parkhurst
• [sdiy] Why do we need the buffers? - gm-C filter question   Aaron Lanterman
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Weller WTCPT Question   xamboldt
• [sdiy] Why do we need the buffers? - gm-C filter question   Aaron Lanterman
• [sdiy] Marshall TIme Modulator inside peek   Paul Schreiber
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Why do we need the buffers? - gm-C filter question   JH.
• [sdiy] Why do we need the buffers? - gm-C filter question   harrybissell
• [sdiy] Why do we need the buffers? - gm-C filter question   JH.
• [sdiy] Why do we need the buffers? - gm-C filter question   JH.
• [sdiy] Why do we need the buffers? - gm-C filter question   JH.
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Why do we need the buffers? - gm-C filter question   Don Tillman
• [sdiy] Why do we need the buffers? - gm-C filter question   René Schmitz
• [sdiy] Why do we need the buffers? - gm-C filter question   JH.
• [sdiy] The Electronotes have come!!!!   Ian Fritz
• [sdiy] WASP filter   harrybissell
• [sdiy] programmable synth module (Re: ADuC702x ...)   Paul Perry
• [sdiy] Useful patents on OTAs and VCFs   Aaron Lanterman
• [sdiy] Figuring out MS-20 style filters...   Aaron Lanterman
• [sdiy] Marshall TIme Modulator inside peek, schematics   Vesa Lahteenmaki
• [sdiy] Two Nuts & Volts articles from last year   Gabriel Lindeborg
• [sdiy] Figuring out MS-20 style filters...   René Schmitz
• [sdiy] WASP filter   René Schmitz
• [sdiy] WASP filter   JH.
• [sdiy] Thomas Henry books available soon   jbv
• [sdiy] chaotic midi to dynsync conversion with a tb303   Colin f
• [sdiy] Why do we need the buffers? - gm-C filter question   ASSI
• [sdiy] Thomas Henry books available soon   john mahoney
• SV: Re: [sdiy] Why do we need the buffers? - gm-C filter question   karl dalen
• [sdiy] Thomas Henry books available soon   Tim Parkhurst
• [sdiy] Thomas Henry books available soon   Eric Brombaugh
• [sdiy] Marshall TIme Modulator inside peek   scottnoanh at peoplepc.com
• [sdiy] Mysterious Marshall Time Modulator innards   Mike
• [sdiy] Strange old parts question...   Andre Majorel
• [sdiy] searchig for 'paia' on ebay... (off topic, so... ; )   Colin Raffel
• [sdiy] some more info of Marshall Time Modulator   Vesa Lahteenmaki
• [sdiy] CEM3328 seems to only have buffers at the end   jhaible at debitel.net
• [sdiy] CEM3328 seems to only have buffers at the end   Rainer Buchty
• [sdiy] Mysterious Marshall Time Modulator innards   jhaible at debitel.net
• [sdiy] A few questions regarding Chris Macdonald's Dual ADSR Circuit   Chris Manders
• [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• SV: Re: [sdiy] Two Nuts & Volts articles from last year   Karl Ekdahl
• [sdiy] CEM3328 seems to only have buffers at the end   Mike
• SV: Re: SV: Re: [sdiy] Two Nuts & Volts articles from last year   Karl Ekdahl
• [sdiy] need help building a simple drum synth   Tim Parkhurst
• [sdiy] CEM3328 seems to only have buffers at the end   Harry Bissell Jr
• [sdiy] CEM3328 seems to only have buffers at the end   Bob Weigel
• [sdiy] CEM3328 seems to only have buffers at the end   Harry Bissell Jr
• [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• [sdiy] The SDIY addiction   James Patchell
• [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• [sdiy] Slightly OT: www.onlinecomponents.com   harrybissell
• [sdiy] general question: causes of high noise floor on ouputs   harrybissell
• [sdiy] CEM3328 seems to only have buffers at the end   Aaron Lanterman
• [sdiy] Give us some music of your creations   Rykhaard D.A.M.I.A.N.
• [sdiy] Give us some music of your creations   Oakley Sound
• [sdiy] Give us some music of your creations   David J. Hughes
• [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• [sdiy] Give us some music of your creations   Heitor Alves
• [sdiy] 909 attack mod   Fredrik Carlqvist
• Sv: [sdiy] Give us some music of your creations   Daniel Araya
• [sdiy]RE: [sdiy] Give us some music of your creations   rdrake
• [sdiy] Give us some music of your creations   Matthias.Herrmann at jeppesen.com
• [sdiy] Give us some music of your creations   jhaible at debitel.net
• [sdiy] Give us some music of your creations   Jason Tribbeck
• [sdiy] Give us some music of your creations   Chris Strellis
• [sdiy] japanese optical synth electronics kit   denshi
• [sdiy] The Shimmer section in Ken Stone's Cynare - BUILD IT! :O :O :D   Rykhaard D.A.M.I.A.N.
• [sdiy] Got my copy of MAM   Eric Brombaugh
• [sdiy] tape head preamp design   Gene Stopp
• [sdiy] Marshall TIme Modulator inside peek   Tom Arnold
• [sdiy] Give us some music of your creations   Charles Bisaillon
• [sdiy] Give us some music of your creations   rude66
• [sdiy] OA81 diodes.   Jaroslav Lukes
• [sdiy] Buchla switching supplies   Michael Bacich
• [sdiy] Give us some music of your creations   mark verbos
• SV: [sdiy] Dumpster salvage   Karl Ekdahl
• [sdiy] Give us some music of your creations   Michael Ruberto
• [sdiy] Buchla switching supplies   mcb, inc.
• [sdiy] Buchla switching supplies   James Patchell
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   karl dalen
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   karl dalen
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• [sdiy] Re: Give us some music of your creations   Grant Richter
• [sdiy] Re: Give us some music of your creations   Grant Richter
• [sdiy] Radio Shack--latest twist   KA4HJH
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   jhaible at debitel.net
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   Antti Huovilainen
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   René Schmitz
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   jhaible at debitel.net
• [sdiy] basic electronics question - voltage divider   Scott Gravenhorst
• [sdiy] basic electronics question - voltage divider   Jim Bob
• [sdiy] Dumpster salvage boastiing (so as not to confuse the origional thread : )   Harry Bissell Jr
• [sdiy] basic electronics question - voltage divider   Jim Bob
• [sdiy] basic electronics question - voltage divider   Aaron Lanterman
• [sdiy] basic electronics question - voltage divider   jays at aracnet.com
• [sdiy] basic electronics question - voltage divider   René Schmitz
• [sdiy] unsubscribing   D A F
• [sdiy] New Sample, new pic both uploaded. :)   Rykhaard D.A.M.I.A.N.
• SV: Re: SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   karl dalen
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• [sdiy] Zeroscillator Update   Cynthia Webster
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• [sdiy] Configurable Phase Shift Project   JH.
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• [sdiy] New project "done"!! & Music.   Karl Ekdahl
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   Aaron Lanterman
• [sdiy] Japanese pairs seem gone...   Aaron Lanterman
• [sdiy] DIY knobs   Loscha
• [sdiy] DIY knobs   Rykhaard D.A.M.I.A.N.
• [sdiy] Configurable Phase Shift Project   scottnoanh at peoplepc.com
• [sdiy] Japanese pairs seem gone...   scottnoanh at peoplepc.com
• [sdiy] Wanna help me make up a VCF homework? ;)   Aaron Lanterman
• [sdiy] Cap shorted in only one direction   Michael Bacich
• [sdiy] Cap shorted in only one direction   Michael Bacich
• [sdiy] Wanna help me make up a VCF homework? ;)   Antti Huovilainen
• SV: Re: [sdiy] CEM3328 seems to only have buffers at the end   Steve Ridley
• [sdiy] Wanna help me make up a VCF homework? ;)   René Schmitz
• [sdiy] Configurable Phase Shift Project   Scott Stites
• [sdiy] New Products from Livewire!   Peter Grenader
• [sdiy] DIY knobs   James Patchell
• [sdiy] DIY knobs   Stephen Harrison
• [sdiy] DIY knobs   mark verbos
• [sdiy] Announcing: Pot Chiclets   John Loffink
• [sdiy] DIY knobs   Tom Arnold
• [sdiy] Wanna help me make up a VCF homework? ;)   Grant Richter
• SV: Re: [sdiy] DIY knobs   Karl Ekdahl
• [sdiy] DIY knobs   mark verbos
• [sdiy] BJT chapter from ee text free to d/l   Tony Kalomiris
• [sdiy] gate CV being held above 0V when off - why?   Amos
• [sdiy] paia midi to cv   Jim Bob
• SV: Re: [sdiy] Buchla switching supplies   Karl Ekdahl
• [sdiy] 3pin xlr for power - wireing convention?   Steve Ridley
• [sdiy] next quesiton about power - what gauge wire to use?   Harry Bissell Jr
• SV: Re: [sdiy] Buchla switching supplies   Harry Bissell Jr
• [sdiy] Fw: [benders] Japan's "PSE law": April 1st,2006 - selling pre-2001 gadgets with AC adapters = ILLEGAL   Pat Kammerer
• [sdiy] paia midi to cv   Grant Richter
• [sdiy] paia midi to cv   Grant Richter
• [sdiy] [Sdiy-legal stuff]Is it legal to sell a synth based on other people's designs?   Harry Bissell Jr
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Chris Manders
• [sdiy] [Sdiy-legal stuff]Is it legal to sell a synth based on other people's designs?   Paul Perry
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Richard Wentk
• [sdiy] bunch O' LEDS   phil macnutt
• [sdiy] [Sdiy-legal stuff]Is it legal to sell a synth based on other people's designs?   James Patchell
• [sdiy] [Sdiy-legal stuff]Is it legal to sell a synth based on other people's designs?   NATE!
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Harry Bissell Jr
• [sdiy] bunch O' LEDS   phil macnutt
• [sdiy] Synth DIY UK Event update   neil.johnson97 at ntlworld.com
• [sdiy] bunch O' LEDS   Eric Brombaugh
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Gene Stopp
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Chris Manders
• [sdiy] Buchla speaks out in public first time in 64 years!   karl dalen
• [sdiy] bunch O' LEDS   harrybissell
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Ray Wilson
• [sdiy] Keyboard Circuit - Seperate Keyboard and Gate buses?   Tony Kalomiris
• [sdiy] 16v cap in for 10v cap   Paul Schreiber
• [sdiy] [Sdiy-legal stuff]Is it legal to sell a synth based on other people's designs?   Roy J. Tellason
• [sdiy] Synths and output levels   R. D. Davis
• [sdiy] Synths and output levels   Roy J. Tellason
• [sdiy] silicon valley book shops?   wayfar
• [sdiy] Schematic capture & board layout CAD recommendations   John Loffink
• [sdiy] minimoog key bushings   Bob Weigel
• SV: Re: [sdiy] LF357 as follower / departure from ideal opamp behaviour   Pat Kammerer
• [sdiy] Synths and output levels   Oren Leavitt
• [sdiy] Synths and output levels   phillip m gallo
• [sdiy] 2 new pics up - coloured knobs with pics on them ;)   Rykhaard D.A.M.I.A.N.
• [sdiy] minimoog key bushings   Bob Weigel
• [sdiy] 2 new pics up - coloured knobs with pics on them ;)   Rykhaard D.A.M.I.A.N.
• [sdiy] Ok...the synth poll results ..finally..POSTED!   Bob Weigel
• [sdiy] Synth website update - link corrected   Mikael Mørup
• [sdiy] Which 8085 assembler would you recommend?   Rainer Buchty
• [sdiy] Which 8085 assembler would you recommend?   Roy J. Tellason
• [sdiy] SYASH up!   Ian Fritz
• [sdiy] Keio TS201012   Colin f
• [sdiy] SYASH up!   Ian Fritz
• [sdiy] minimoog key bushings   Tom Arnold
• [sdiy] Keio TS201012   JH.
• [sdiy] SYASH up!   JH.
• [sdiy] Which 8085 assembler would you recommend?   wayfar
• [sdiy] Anyone ever use an AY3-8910?   Eric Brombaugh
• [sdiy] Looking for lm394 and tempco in the u.s.   Pete
• [sdiy] wall wart confusion   amokan
• [sdiy] wall wart confusion   Aleks Clark
• [sdiy] wall wart confusion   amokan
• [sdiy] Synth DIY UK 2006 update: website now online   neil.johnson97 at ntlworld.com
• [sdiy] Keio TS201012   Colin f
• [sdiy] Bourns CP Pots ( Series 90 )   Tom Arnold
• [sdiy] SMD resistors   Fredrik Carlqvist
• [sdiy] Anyone ever use an AY3-8910?   Andre Majorel
• [sdiy] Anyone ever use an AY3-8910?   Gabriel Lindeborg
• [sdiy] SMD resistors   clark at andrews.edu
• [sdiy] Looking for a Multi-VCF schematic for an SSM2040 ......   Samppa Tolvanen
• [sdiy] Anyone ever use an AY3-8910?   Eric Brombaugh
• [sdiy] Looking for lm394 and tempco in the u.s.   Scott Stites
• [sdiy] Anyone ever use an AY3-8910?   James Patchell
• [sdiy] wall wart confusion   amokan
• [sdiy] wall wart confusion   Aleks Clark
• [sdiy] Intellectual Property Laws   Grant Richter
• [sdiy] wall wart confusion   amokan
• [sdiy] SMD resistors   harrybissell
• [sdiy] wall wart confusion   amokan
• [sdiy] Intellectual Property Laws   Woody Wall
• [sdiy] wall wart confusion   Bob Weigel
• SV: Re: [sdiy] Anyone ever use an AY3-8910?   karl dalen
• [sdiy] Schematic capture & board layout CAD recommendations   John Loffink
• [sdiy] OT: Behringer fined $1M   KA4HJH
• [sdiy] OT: Behringer fined $1M   NATE!
• [sdiy] OT: Behringer fined $1M   harrybissell
• [sdiy] Scope Probe   Jim Bob
• [sdiy] Scope Probe   Eric Brombaugh
• [sdiy] Scope Probe   KA4HJH
• [sdiy] Seeking examples for Wed lecture   Aaron Lanterman
• [sdiy] OT: Behringer fined $1M   NATE!
• [sdiy] Anyone ever use an AY3-8910?   Travis Shire
• [sdiy] Seeking examples for Wed lecture   Yves Usson
• [sdiy] OT: Behringer fined $1M   Fredrik Carlqvist
• [sdiy] WASP Simulator   Laurie Biddulph
• [sdiy] OT: Behringer fined $1M   Paul Maddox
• [sdiy] Korg Delta Top Octave Generator IC - AY-3-0214   Chris Manders
• [sdiy] Seeking examples for Wed lecture   HOSHUYAMA
• [sdiy] Seeking examples for Wed lecture   Antti Huovilainen
• [sdiy] Re: Seeking examples for Wed lecture   Samppa Tolvanen
• [sdiy] OT: Behringer fined $1M   Jay Schwichtenberg
• [sdiy] OT: Behringer fined $1M   Jay
• [sdiy] Re: Seeking examples for Wed lecture   Grant Richter

Last message date: Tue Feb 28 19:18:09 CET 2006
Archived on: Tue Jun 3 23:31:54 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...