[sdiy] RE: [sdiy] EFM Seq-2A

[Tom Arnold]

On Wed, Feb 08, 2006 at 11:04:27AM -0500, Dave Magnuson wrote:
> Here's the details of the short:
> 
> There is a jumper (wire link) you need to install on the top of the board 
> between Pin 12 of U5 to ground.   At the end of the jumper furthest from 
> the IC (at the ground bus) the pad is too large... so the ground bus is 
> connected to the adjacent trace on the circuit board.
> 
> You need to seperate the pad from the neighboring trace, but leave it 
> conencted to the ground bus

I have one of these boards fully stuffed.  I dont see the U5 pin-12 error.
Pin 12 connects to a pad right next to it that has a jumper to the ground
bus down the middle of the board.

I havent spent a huge amount of time trying to make it work yet.

The saddest part about this, following my long-standing rule of making the
front panel/case/whatever first ( got tired of piles of stuffed boards around
waiting for me to make enclosures ), I made the enclosure first and its been
sitting here taunting me for about a year now...

-- 
 -----------------------------------------------------------------
 - Tom Arnold       -  Free Synth DIY webspace http://www.sdiy.org 
 - SynthGeek        -
 - BBD Fanatic      -  "...is it a virus, a drug, or a religion?" 
 - echo evho wjxo   -    Juanita Shrugs. "What's the difference?" 
 --------------------