[sdiy] sample & hold

[Scott Stites]

I played with Rene's YASH quite a bit - it worked wonderfully.  Once you get it going proper, just try putting a jumper across that cap - Track and Hold can sound pretty wild.  You probably already have everything laid out on the panel, but an extra SPST would do it.

Ian - looking forward to seeing that design!  Does it work well enough to use it for polyphony?

Cheers,
Scott


-----Original Message-----
>From: "Rykhaard D.A.M.I.A.N." <rykhaard at gmail.com>
>Sent: Feb 2, 2006 10:03 AM
>To: synth-diy <synth-diy at dropmix.xs4all.nl>
>Subject: Re: [sdiy] sample & hold
>
>On 2/2/06, Scott Stites <scottnoanh at peoplepc.com> wrote:
>>
>> Rene Schmitz's YASH is a great little S&H which uses the LF398.  It has an internal clock with a normalled input for external clock signals.  In fact, if one put a switch across the 470 pF cap, one could switch it to Track and Hold operation.
>>
>> Cheers,
>> Scott
>
>Ahhh!  Very nice to hear an opinion on it!  ;)  I chose to go with
>René's version, as:
>
>- I've had 1 of the LF398's for almost 10 years, and never used
>- it were a very simple circuit and finally
>- I seem to be 'cursed' when it comes to S&H's and White Noise
>generators, all of my buildling life. :O :(
>
>I Got the WN from René going though, and may have the S&H parts added
>today, unless I concentrate on finishing the sequencer portion. :) 
>(Got IT's 1st actual step working, yesterday.  Excited about that. :D
>Whole panel's almost done. :) :) )
>
>--
>Take care,
>Warmth and Peace,
>Ryk
>
>http://deathlehem.bravehost.com/damian.html - D.A.M.I.A.N.;s webpage -
>Feb. 0206 update
>


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com