[sdiy] Re: [AH] Weird Polysix problem, all LEDs on....help!

[Synthusiast]

>the same thing happened when i fixed my 909.. the problem i had with the
>random sequencer patterns was still there, but a total reset fixed it. so 
>if
>there is a reset procedure, it might be an idea.. there may be corrupt data
>in the synth somewhere that a reset will take care of..
>
>r./

Hi Ruud,

Yes, corrupt memory may cause boot problems on a 909, but no, this isn't the 
case on a Polysix. It's the actual reset circuit that needs to be calibrated 
as described in the Polysix service manual.

Regards,
Martijn