[sdiy] Uh oh ....... possible, assistance?? Sequencer .......

[mark verbos]

run your gate out and your trigger in to an AND gate. That output will 
be a trigger for every step you have the gate on.

Mark




Rykhaard D.A.M.I.A.N. wrote:

> On 2/5/06, harrybissell <harrybissell at prodigy.net> wrote:
> 
>>Generic method...
>>
>>If you run the sequencer clock through a differentiator (RC
>>hipass filter) and drive the base of a transistor you can use that
>>to crowbar (force) the gate signal to go low at the beginning of each
>>step.
>>
>>This will only work when the gate is high... if it is programmed low
>>there
>>will br no effect.
>>
>>H^) harry
> 
> 
> Thankee for the tip, Harry. :)  The way the panel is set up though, I
> can't use it. :(
> 
> All of the Gates are coming from the 4051, who's output is controlling
> the Bases of individual transistors for each Gate, which are also
> controlling the LEDs for each Gate.  (Ken Stone circuit, that works
> very well, for each Gate / LED.)
> 
> I'd thought of running clock directly to it, but then that'd be a Gate
> on every single step, through the Master Gate Out. :(
> 
> Cooooooooould I though, hook up a Differentiator, to each of the 8
> Outputs from the 4051 (that's dedicated to the Gates)?  The Inverting
> Summer that I'm currently using, could act as the buffer as well.
> 
> ??  :)
> 
> --
> Take care,
> Warmth and Peace,
> Ryk
> 
> http://deathlehem.bravehost.com/damian.html - D.A.M.I.A.N.;s webpage -
> Feb. 0506 update
> 
>