[sdiy] DIY knobs

[mark verbos]

or injection molding equipment. It's up on ebay.

mark



James Patchell wrote:
> What you need to do is invest in a small lathe...You can get a fairly 
> nice one for only a few hundred dollars.
> 
> At 05:36 AM 2/23/2006 +0100, Karl Ekdahl wrote:
> 
>> Hi all, i've been trying for the last couple of days
>> to make my own DIY knobs from a piece of wooden shaft.
>> It seems extremely hard to me to be able to (without a
>> drill stand) drill the holes straight enough to make
>> the "knob" not be visibly skewed. Does anyone have any
>> tips?
>>
>> I was thinking of maybe use latex if wood isn't
>> working. Any good tips on easy-to-come-by industrial
>> latex or equivalent(s) that will work with a
>> clay/plaster mold?
>>
>> Karl
> 
> 
>         -Jim
> ***************************************************************
> http://www.oldcrows.net/~patchell
> 
> ***************************************************************
> 
> 
>