May 2002 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed May 1 00:10:30 CEST 2002
Ending: Fri May 31 21:16:27 CEST 2002
Messages: 926

• Fw: [sdiy] New synth DIY site ?   Clint Davis
• [sdiy] CMOS as voltage variable resistor   Grant Richter
• [sdiy] simmons SDS 800 question,   ElmacacoX at aol.com
• [sdiy] New synth DIY site ?   J. Larry Hendry
• [sdiy] CMOS as voltage variable resistor   Happy Harry
• [sdiy] CMOS as voltage variable resistor   Theo
• [sdiy] CMOS as voltage variable resistor   Tim Ressel
• [sdiy] New synth DIY site ?   CHoaglin at aol.com
• (ot) Re: [sdiy] New synth DIY site ?   CHoaglin at aol.com
• [sdiy] New synth DIY site ?   CHoaglin at aol.com
• [sdiy] CMOS as voltage variable resistor   Grant Richter
• [sdiy] S/PDIF cable.   Alex
• [sdiy] part identification   Ken Stone
• [sdiy] part identification   Ken Stone
• [sdiy] CMOS as voltage variable resistor   jhaible
• [sdiy] New synth DIY site ?   Magnus Danielson
• [sdiy] CMOS as voltage variable resistor   Magnus Danielson
• OT: Re: [sdiy] New synth DIY site ?   J. Larry Hendry
• [sdiy] New synth DIY site ?   Paul Schreiber
• [sdiy] CMOS as voltage variable resistor   Happy Harry
• [sdiy] CMOS as voltage variable resistor   René Schmitz
• [sdiy] CMOS as voltage variable resistor   Grant Richter
• [sdiy] Re: WAY OT humour - New synth DIY site ?   Grant Richter
• [sdiy] Re: WAY OT humour - New synth DIY site ?   Ben
• [sdiy] Re: WAY OT humour - New synth DIY site ?   Rainer Buchty
• [sdiy] CMOS as voltage variable resistor   jhaible
• [sdiy] FS: Nice Breadboard   Rhen, Kris
• [sdiy] Korg MS20 Noise problem   Joe Kramer
• [sdiy] Fostex B16/Studiomaster Desk/Teac A3440   Ken MacBeth
• (ot) Re: [sdiy] New synth DIY site ?   Paul Maddox
• [sdiy] Re: WAY OT humour - New synth DIY site ?   Paul Maddox
• [sdiy] Re: WAY OT humour - New synth DIY site ?   oleavitt at ix.netcom.com
• [sdiy] CMOS as voltage variable resistor   Peter M Blackett
• [sdiy] Fixing cheap machinery   Tim Ressel
• [sdiy] VF-1   Moho Disco
• [sdiy] Re: WAY OT humour - New synth DIY site ?   cyborgzero at comcast.net
• [sdiy] Re: WAY OT humour - New synth DIY site ?   George Kisslak
• [sdiy] CMOS as voltage variable resistor   Osamu (Sam) HOSHUYAMA
• [sdiy] VF-1   harry
• [sdiy] Hollow low-pressure ladder filter   eric b
• [sdiy] Hollow low-pressure ladder filter   eric b
• [sdiy] Midi2cv Project Update   Tim Ressel
• [sdiy] Hollow low-pressure ladder filter   eric b
• [sdiy] Hollow low-pressure ladder filter   eric b
• (ot) Re: [sdiy] New synth DIY site ?   Scott Gravenhorst
• [sdiy] Midi2cv Project Update   Scott Gravenhorst
• [sdiy] Re: WAY OT humour - New synth DIY site ?   John L Marshall
• [sdiy] Midi2cv Project Update   Scott Gravenhorst
• [sdiy] CMOS as voltage variable resistor (not really)   jorgen.bergfors at idg.se
• [sdiy] Fixing cheap machinery   CHoaglin at aol.com
• [sdiy] funny list stuff going on????   Michael
• [sdiy] Oakley Sound 3031   Tony Allgood
• Re: [sdiy] CMOS as voltage variable resistor   jhaible at debitel.net
• [sdiy] CMOS as voltage variable resistor (not really)   John L Marshall
• [sdiy] CMOS as voltage variable resistor   greg montalbano
• Re: [sdiy] CMOS as voltage variable resistor   jhaible at debitel.net
• (ot) Re: [sdiy] New synth DIY site ?   Batz Goodfortune
• [sdiy] Midi2cv Project Update   phillip m gallo
• [sdiy] Midi2cv Project Update   Craig Critchley
• [sdiy] More of that S/PDIF stuff.   Batz Goodfortune
• [sdiy] CMOS as voltage variable resistor   Grant Richter
• [sdiy] custom screened panels   J. Larry Hendry
• (ot) Re: [sdiy] New synth DIY site ?   Dean Stiglitz
• [sdiy] More of that S/PDIF stuff.   Jay Schwichtenberg
• [sdiy] Hollow low-pressure ladder filter   Magnus Danielson
• [sdiy] Midi2cv Project Update   Paul Maddox
• [sdiy] More of that S/PDIF stuff.   Magnus Danielson
• [sdiy] Taking the big step...   Peter Grenader
• (ot) Re: [sdiy] New synth DIY site ?   CHoaglin at aol.com
• [sdiy] More of that S/PDIF stuff.   CHoaglin at aol.com
• [sdiy] Taking the big step...   Hermann Seib
• [sdiy] Re: converting DX7II power supply   riccardo
• [sdiy] CMOS as voltage variable resistor   Steve Ridley
• [sdiy] Chip ID   Dave Magnuson
• [sdiy] Re: converting DX7II power supply   Batz Goodfortune
• [sdiy] Chip ID   John L Marshall
• [sdiy] Chip ID   patchell
• [sdiy] Chip ID   John L Marshall
• [sdiy] Re: converting DX7II power supply   Rainer Buchty
• [sdiy] Re: converting DX7II power supply   riccardo
• [sdiy] Re: converting DX7II power supply   Batz Goodfortune
• [sdiy] Tube amp problem   Justin Herrmann
• [sdiy] Tube amp problem   René Schmitz
• [sdiy] Chip ID   CHoaglin at aol.com
• [sdiy] CMOS V.C.R. with 1V/Oct Response   eq927 at freenet.carleton.ca
• [sdiy] CMOS V.C.R. with 1V/Oct Response   Tim Ressel
• [sdiy] Tube amp problem   John L Marshall
• [sdiy] CMOS V.C.R. with 1V/Oct Response   Theo
• [sdiy] CMOS V.C.R. with 1V/Oct Response   Scott Gravenhorst
• [sdiy] Chip ID   Batz Goodfortune
• [sdiy] Chip ID   Magnus Danielson
• [sdiy] Re: Daffy CMOS ASCIImatic   Scott Bernardi
• [sdiy] CMOS V.C.R. with 1V/Oct Response   Magnus Danielson
• FWD:Re: [sdiy] CMOS V.C.R. with 1V/Oct Response   Scott Gravenhorst
• [sdiy] Chip ID   Batz Goodfortune
• [sdiy] Chip ID   Magnus Danielson
• [sdiy] IC ID?...   Studio 271 Productions
• [sdiy] CMOS V.C.R. with 1V/Oct Response   Grant Richter
• [sdiy] IC ID?...   harry
• [sdiy] IC ID?...   harry
• [sdiy] IC ID?...   CHoaglin at aol.com
• [sdiy] IC ID?...   Studio 271 Productions
• [sdiy] CMOS V.C.R. with 1V/Oct Response   René Schmitz
• [sdiy] IC ID?...   Neil Johnson
• [sdiy] CMOS V.C.R. with 1V/Oct Response   eq927 at freenet.carleton.ca
• [sdiy] IC ID?...   CHoaglin at aol.com
• FWD:Re: [sdiy] CMOS V.C.R. with 1V/Oct Response   eq927 at freenet.carleton.ca
• [sdiy] CMOS V.C.R. with 1V/Oct Response   eq927 at freenet.carleton.ca
• [sdiy] More ASM VCO Trouble   Default Jamerson
• [sdiy] More ASM VCO Trouble   Oren B. Leavitt
• [sdiy] Filter Design Software   Scott Gravenhorst
• [sdiy] 2nd board of PolyKorg Clone finished   jhaible
• [sdiy] Polysix repair question   Dave Magnuson
• [sdiy] cs 01 schematics? crossposted   ElmacacoX at aol.com
• [sdiy] 1s1715 specs?   ElmacacoX at aol.com
• [sdiy] 1s1715 specs?   mark verbos
• [sdiy] 1s1715 specs?   ElmacacoX at aol.com
• [sdiy] 1s1715 specs?   John L Marshall
• [sdiy] Chip ID   Don Tillman
• [sdiy] SF Bay Area: Have a beer!   Don Tillman
• [sdiy] Polysix repair question   Sowa Roman
• [sdiy] PIC Baudrate Converter   Laurie Biddulph
• [sdiy] Tube amp problem   René Schmitz
• [sdiy] PIC Baudrate Converter   Scott Gravenhorst
• [sdiy] PIC Baudrate Converter (Correction)   Scott Gravenhorst
• [sdiy] Pro-One membrane keyboard   greg montalbano
• [sdiy] Tube amp problem   eric b
• [sdiy] Tube research   Brousseau, Paul E (Paul)
• [sdiy] UK synth diy meeting page updated   Paul Maddox
• [sdiy] PIC Baudrate Converter   cyborgzero at comcast.net
• [sdiy] interesting expo design   Michael Ruberto
• [sdiy] Tube amp problem   René Schmitz
• [sdiy] Tube amp problem Correction   René Schmitz
• [sdiy] interesting expo design   Tim Ressel
• [sdiy] Tube amp problem   René Schmitz
• [sdiy] interesting expo design   René Schmitz
• [sdiy] interesting expo design   Tim Ressel
• [sdiy] PIC Baudrate Converter   Gene Stopp
• [sdiy] interesting expo design   René Schmitz
• [sdiy] interesting expo design   patchell
• [sdiy] interesting expo design   Michael Ruberto
• [sdiy] midi2cv update   Tim Ressel
• [sdiy] midi2cv update   J.D. McEachin
• [sdiy] PIC Baudrate Converter   Byron G. Jacquot
• [sdiy] self-promo: SynthImagery: debut analog electronic cd   Jeffrey Pontius
• [sdiy] Chassis...   patchell
• [sdiy] Tube research   eric b
• [sdiy] Tube amp problem   John L Marshall
• [sdiy] Tube amp problem   eric b
• [sdiy] Tube amp problem   eric b
• [sdiy] interesting expo design   Scott Bernardi
• [sdiy] "Korg 35" Blown - HELP!   Joe Kramer
• [sdiy] "Korg 35" Blown - HELP!   jhaible
• [sdiy] PIC Baudrate Converter   mikko.a.helin at nokia.com
• Re(2): [sdiy] "Korg 35" Blown - HELP!   jhaible
• [sdiy] interesting expo design   Paul Perry
• [sdiy] Tube amp problem   John L Marshall
• [sdiy] interesting expo design   patchell
• [sdiy] Pro-One membrane keyboard   Grant Richter
• [sdiy] paia 9700 series   magic_silver_box!
• [sdiy] Pro-One membrane keyboard   Barry L. Klein
• [sdiy] paia 9700 series   Diane&John Rose
• [sdiy] Pro-One membrane keyboard   mark verbos
• [sdiy] scsi shock   Dave Krooshof
• [sdiy] midi2cv WORKS!!!!!!!!!!!!!!!!!!   Tim Ressel
• [sdiy] midi2cv WORKS!!!!!!!!!!!!!!!!!!   Magnus Danielson
• [sdiy] scsi shock   Happy Harry
• [sdiy] scsi shock   Tim Ressel
• [sdiy] scsi shock   cyborgzero at comcast.net
• [sdiy] PIC Baudrate Converter   Magnus Danielson
• [sdiy] PIC Baudrate Converter   Gene Stopp
• [sdiy] paia 9700 series   alex dickey
• [sdiy] midi2cv WORKS!!!!!!!!!!!!!!!!!!   Peter Grenader
• [sdiy] 9700 power supply   Diane&John Rose
• [sdiy] 9700 modules   Diane&John Rose
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Peter Grenader
• [sdiy] midi2cv WORKS!!!!!!!!!!!!!!!!!!   John L Marshall
• [sdiy] midi2cv WORKS!!!!!!!!!!!!!!!!!!   Tim Ressel
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Tim Ressel
• [sdiy] Low Pass Gate is soooOOOOooo sweet   John L Marshall
• [sdiy] self-promo: SynthImagery: debut analog electronic cd   CHoaglin at aol.com
• [sdiy] on the subject of shocks   Lincoln Fong
• [sdiy] on the subject of shocks   Tim Ressel
• [sdiy] paia 9700 series   Alan W Mason
• [sdiy] on the subject of shocks   J. Larry Hendry
• [sdiy] on the subject of shocks   cyborgzero at comcast.net
• [sdiy] 9700 power supply   John Blacet
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Michael Ruberto
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Peter Grenader
• [sdiy] Low Pass Gate is soooOOOOooo sweet   >>>marjan<<<
• [sdiy] Low Pass Gate is soooOOOOooo sweet   John Blacet
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Michael Ruberto
• [sdiy] 9700 power supply   Diane&John Rose
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Tim Ressel
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Prototek
• [sdiy] More 904A Advice Last time - honest   Keith Winstanley
• [sdiy] Low Pass Gate is soooOOOOooo sweet   PRCamann at aol.com
• [sdiy] Paia Ekx10 ADSR questions   Prototek
• [sdiy] Low Pass Gate is soooOOOOooo sweet   >>>marjan<<<
• [sdiy] Pro-One membrane keyboard   Rude 66
• [sdiy] Paia Ekx10 ADSR questions   greg montalbano
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jhaible
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Peter Grenader
• [sdiy] Low Pass Gate is soooOOOOooo sweet   harry
• [sdiy] Low Pass Gate is soooOOOOooo sweet   harry
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Tim Ressel
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Paul Perry
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Oren B. Leavitt
• [sdiy] Low Pass Gate is soooOOOOooo sweet   harry
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Joe Kramer
• [sdiy] Defluxing/Circuit Trace Repair   Joe Kramer
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Peter Grenader
• [sdiy] Defluxing/Circuit Trace Repair   Tim Ressel
• [sdiy] on the subject of shocks   Glen
• [sdiy] Defluxing/Circuit Trace Repair   Batz Goodfortune
• [sdiy] VCA speed in tremolo   Lincoln Fong
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jhaible
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jhaible
• [sdiy] Defluxing/Circuit Trace Repair   Neil Johnson
• [sdiy] VCA speed in tremolo   >>>marjan<<<
• [sdiy] Defluxing/Circuit Trace Repair   patchell
• [sdiy] Defluxing/Circuit Trace Repair   Scott Gravenhorst
• [sdiy] Defluxing/Circuit Trace Repair   epeasant at telusplanet.net
• [sdiy] Defluxing/Circuit Trace Repair   Colin Fraser
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Joe Kramer
• [sdiy] on the subject of shocks   Tim Ressel
• [sdiy] Defluxing/Circuit Trace Repair   Joe Kramer
• [sdiy] Rack my mini osc please   Nicholas Pelkey
• [sdiy] Defluxing/Circuit Trace Repair   Jim Patchell
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jhaible
• [sdiy] Defluxing/Circuit Trace Repair   CHoaglin at aol.com
• [sdiy] TL05x/TL03x   Jim Patchell
• [sdiy] VCA controls   Tim Ressel
• [sdiy] Defluxing/Circuit Trace Repair   Peter Snow
• [sdiy] scsi shock/on the subject of shocks   Dave Krooshof
• [sdiy] Defluxing/Circuit Trace Repair   Colin Fraser
• [sdiy] Defluxing/Circuit Trace Repair   Neil Johnson
• [sdiy] Defluxing/Circuit Trace Repair   Peter Snow
• [sdiy] Defluxing/Circuit Trace Repair   Joe Kramer
• [sdiy] TR-909 repair Q   Jim Johnson
• [sdiy] VCA controls   Peter M Blackett
• [sdiy] Vactrol Selection (for 2 meg pot)?   Cynthia Webster
• [sdiy] Defluxing/Circuit Trace Repair   Peter Snow
• [sdiy] Defluxing/Circuit Trace Repair   Tim Ressel
• [sdiy] Vactrol Selection (for 2 meg pot)?   phillip m gallo
• [sdiy] VCA controls   Dave Magnuson
• [sdiy] TR-909 repair Q   Dan Gendreau
• [sdiy] VCA controls   John L Marshall
• [sdiy] TR-909 repair Q   Dave Magnuson
• [sdiy] VCA controls   Scott Bernardi
• [sdiy] VCA controls   John Loffink
• [sdiy] VCA controls   Cynthia Webster
• [sdiy] Defluxing/Circuit Trace Repair   CHoaglin at aol.com
• [sdiy] VCA controls   Toby Paddock
• [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls   Cynthia Webster
• [sdiy] Defluxing/Circuit Trace Repair   Batz Goodfortune
• [sdiy] Defluxing/Circuit Trace Repair   harry
• [sdiy] Defluxing/Circuit Trace Repair   Oren B. Leavitt
• [sdiy] VCA controls   Tim Ressel
• [sdiy] Tube amp solution!   Justin Herrmann
• [sdiy] Low Pass Gate is soooOOOOooo sweet   mikko.a.helin at nokia.com
• [sdiy] scsi shock/on the subject of shocks   Magnus Danielson
• [sdiy] Midibox64 PCB list   S.Thomas
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jhaible
• [sdiy] Midibox64 PCB list   S.Thomas
• [sdiy] VCA controls   Scott Gravenhorst
• [sdiy] Unsubscribe   David Lamarre
• [sdiy] Low Pass Gate is soooOOOOooo sweet   Joe Kramer
• [sdiy] Need assembler for hire... minimoog osc needs help   Nicholas Pelkey
• [sdiy] Unsubscribe   David Lamarre
• [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls   Happy Harry
• Fwd: Re: [sdiy] VCA controls   greg montalbano
• Fwd: Re: [sdiy] VCA controls   Don Tillman
• [sdiy] VCA controls   Tim Ressel
• Fwd: Re: [sdiy] VCA controls   René Schmitz
• [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls (and LED noise)   John Blacet
• Fwd: Re: [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls   Theo
• [sdiy] VCA controls   Tim Ressel
• [sdiy] VCA controls   harry
• [sdiy] VCA controls   harry
• [sdiy] VCA controls   Bob Roesler
• [sdiy] VCA controls   Batz Goodfortune
• [sdiy] VCA controls   Batz Goodfortune
• Fwd: Re: [sdiy] VCA controls   Don Tillman
• [sdiy] 7413   Rob Mantel
• [sdiy] VCA controls   Colin Fraser
• [sdiy] 7413   patchell
• [sdiy] 7413   pfperry at melbpc.org.au
• [sdiy] 7413   jhaible
• [sdiy] fmmt489   cj3000 at gmx.de
• [sdiy] fmmt489   Trevor Page
• [sdiy] 7413   Rob Mantel
• [sdiy] fmmt489   cyborgzero at comcast.net
• [sdiy] fmmt489   cyborgzero at comcast.net
• [sdiy] fmmt489   Trevor Page
• [sdiy] 7413   jhaible
• [sdiy] fmmt489   cyborgzero at comcast.net
• [sdiy] VCA controls   Paul Maddox
• [sdiy] VCA controls   Steve Ridley
• [sdiy] Pressing buttons   Scott Gravenhorst
• [sdiy] Low Pass Gate is soooOOOOooo sweet   mark verbos
• [sdiy] Pressing buttons   >>>marjan<<<
• [sdiy] Pressing buttons   jhaible
• [sdiy] Pressing buttons   cyborgzero at comcast.net
• [sdiy] Pressing buttons   cyborgzero at comcast.net
• [sdiy] Pressing buttons   j vallier
• [sdiy] Pressing buttons   The Old Crow
• [sdiy] Pressing buttons   Dan Gendreau
• [sdiy] Pressing buttons   harry
• [sdiy] Vote for your favorite noise source   Scott Gravenhorst
• [sdiy] Pressing buttons   Batz Goodfortune
• [sdiy] Low Pass Gate is soooOOOOooo sweet   jorgen.bergfors at idg.se
• [sdiy] 7413   Ingo Debus
• [sdiy] Pressing buttons - Thanx   >>>marjan<<<
• [sdiy] Vote for your favorite noise source   Tim Ressel
• [sdiy] Vote for your favorite noise source   Chris Crosskey
• [sdiy] Vote for your favorite noise source   jorgen.bergfors at idg.se
• [sdiy] Vote for your favorite noise source   mark verbos
• [sdiy] VCA controls   ChristianH
• [sdiy] Vote for your favorite noise source   Peter Grenader
• [sdiy] Vote for your favorite noise source   Scott Bernardi
• [sdiy] Vote for your favorite noise source   jorgen.bergfors at idg.se
• [sdiy] juno 6 dcb   Alex
• [sdiy] Vote for your favorite noise source   René Schmitz
• [sdiy] Pressing buttons   John Speth
• [sdiy] Vote for your favorite noise source   Happy Harry
• [sdiy] Vote for your favorite noise source   Happy Harry
• =?ISO-8859-1?Q?S&H (was:Re: [sdiy] Vote for your favorite noise source)?=   jhaible at debitel.net
• S&H (was:Re: [sdiy] Vote for your favorite noise source)   jorgen.bergfors at idg.se
• =?ISO-8859-1?Q?Re: S&H (was:Re: [sdiy] Vote for your favorite noise source)?=   jhaible at debitel.net
• [sdiy] Vote for your favorite noise source   Ian Fritz
• [sdiy] Vote for your favorite noise source   Sowa Roman
• [sdiy] Vote for your favorite noise source   Gavin
• [sdiy] Vote for your favorite noise source   >>>marjan<<<
• FWD:Re: [sdiy] Vote for your favorite noise source   Scott Gravenhorst
• [sdiy] Vote for your favorite noise source   Tim Ressel
• [sdiy] Vote for your favorite noise source   The Old Crow
• [sdiy] SSM 2020 & 2040 Test Circuits   Tim Curtis
• [sdiy] Vote for your favorite noise source   oleavitt at ix.netcom.com
• [sdiy] Vote for your favorite noise source   Joe Kramer
• [sdiy] SSM 2020 & 2040 Test Circuits   greg montalbano
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Pressing buttons   Paul Maddox
• [sdiy] Pressing buttons   Paul Maddox
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Vote for your favorite noise source   Happy Harry
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Vote for your favorite noise source   Echophazer at aol.com
• [sdiy] Vote for your favorite noise source   Tim Ressel
• [sdiy] Vote for your favorite noise source   René Schmitz
• [sdiy] Vote for your favorite noise source   Tim Ressel
• [sdiy] Xilinx noise source   Tim Ressel
• [sdiy] Test   machinerygod
• [sdiy] Vote for your favorite noise source   John L Marshall
• [sdiy] Test   Machinerygod
• [sdiy] Digital noise source   Tim Ressel
• [sdiy] Vote for your favorite noise source   René Schmitz
• [sdiy] juno 6 dcb   J. Larry Hendry
• [sdiy] Test   Geoff D.
• [sdiy] Re: SF Bay Area: Have a beer!   Don Tillman
• [sdiy] Digital noise source   Jay Schwichtenberg
• [sdiy] Digital noise source   Tim Ressel
• FWD:Re: [sdiy] Vote for your favorite noise source   Theo
• [sdiy] Digital noise source   harry
• [sdiy] Roland DCB Specification   Nathan Fraser
• [sdiy] Re: SF Bay Area: Have a beer!   The Proteus
• [sdiy] Re: SF Bay Area: Have a beer!   Tim Ressel
• [sdiy] Vote for your favorite noise source   Sowa Roman
• [sdiy] RE: Digital noise source   Sowa Roman
• [sdiy] SSM chips - emu emax   Beer420
• [sdiy] perlin-noise source anyone?   Nils Pipenbrinck
• S&H (was:Re: [sdiy] Vote for your favorite noise source)   Michael Buchstaller
• S&H (was:Re: [sdiy] Vote for your favorite noise source)   Sowa Roman
• [sdiy] FS: TONS of Synth DIY pieces parts and electronic design gadgets   Rhen, Kris
• [sdiy] ONE MORE FS: Signal Generator   Rhen, Kris
• [sdiy] perlin-noise source anyone?   jbv
• [sdiy] ebay   Gavin & Delia
• [sdiy] Noise Distribution   René Schmitz
• [sdiy] More Noise Discussion   BrightBoy
• [sdiy] Vote for your favorite noise source   Tom May
• [sdiy] Noise Distribution   Ian Fritz
• [sdiy] Vote for your favorite noise source   Tony Clark
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] juno 6 MIDI   Sean Ellis
• [sdiy] SSM's for trade   David D
• [sdiy] Vote for your favorite noise source   Magnus Danielson
• [sdiy] Noise Distribution   René Schmitz
• [sdiy] paia midi to cv   alex dickey
• [sdiy] Vote for your favorite noise source   Tim Ressel
• [sdiy] paia midi to cv   Tony Allgood
• [sdiy] Vote for your favorite noise source   Sowa Roman
• =?ISO-8859-1?Q?Resistors (was: RE: [sdiy] Vote for your favorite noise source)?=   jhaible at debitel.net
• [sdiy] SSM chips - emu emax   Scott Evans, Gen Mgr
• Resistors (was: RE: [sdiy] Vote for your favorite noise sourc e)   Sowa Roman
• [sdiy] [Fwd: P873-G35-201B] (super fast vactrols)   mark verbos
• =?ISO-8859-1?Q?RE: Resistors (was: RE: [sdiy] Vote for your favorite noise source)?=   jhaible at debitel.net
• [sdiy] surface of keyboards   jhaible at debitel.net
• [sdiy] surface of keyboards   Paul Schreiber
• [sdiy] Addition: surface of keyboards   jhaible at debitel.net
• [sdiy] Small Internal Power Supply Recommendation?   Simon
• [sdiy] Addition: surface of keyboards   IXQY at aol.com
• [sdiy] JEDEC file specification   Jim Patchell
• Re: [sdiy] Addition: surface of keyboards   jhaible at debitel.net
• [sdiy] surface of keyboards   Tim Ressel
• [sdiy] Addition: surface of keyboards   pfperry at melbpc.org.au
• [sdiy] Addition: surface of keyboards   J. Larry Hendry
• [sdiy] roland tr606 din sync error   julian _
• [sdiy] JEDEC file specification   Rainer Buchty
• [sdiy] Small Internal Power Supply Recommendation?   Tim Ressel
• [sdiy] Addition: surface of keyboards   harry
• Resistors (was: RE: [sdiy] Vote for your favorite noise sourc e)   Batz Goodfortune
• [sdiy] RE: Resistors   Tony Clark
• [sdiy] Holidays   Paul Maddox
• [sdiy] JEDEC file specification   Magnus Danielson
• [sdiy] surface of keyboards   Rude 66
• [sdiy] roland tr606 din sync error   cyborgzero at comcast.net
• [sdiy] CVs and passive mixers   magic_silver_box!
• [sdiy] CVs and passive mixers   harry
• [sdiy] surface of keyboards   Byron G. Jacquot
• [sdiy] MIDI3CV udt 2 or final release ?   m.bareille
• [sdiy] MXR Analog Delay schematics   stuart c
• [sdiy] below the surface of keyboards   Lincoln Fong
• [sdiy] surface of keyboards   moxie at kfib.org
• [sdiy] Text books   Alan W Mason
• [sdiy] Automatic gain correction for Overdrive   Fortner Florian
• [sdiy] CVs and passive mixers   Sowa Roman
• [sdiy] below the surface of keyboards   Sowa Roman
• [sdiy] Text books   Sowa Roman
• [sdiy] Thanks for all the keyboard surface replies   jhaible at debitel.net
• [sdiy] Automatic gain correction for Overdrive   Dave Magnuson
• [sdiy] ASM1 VCO input question   Michael Buchstaller
• [sdiy] ASM1 VCO input question   Sowa Roman
• [sdiy] ASM1 VCO input question   >>>marjan<<<
• [sdiy] below the surface of keyboards   greg montalbano
• [sdiy] ASM1 VCO input question   Happy Harry
• [sdiy] Mixer levels   Scott Gravenhorst
• [sdiy] Automatic gain correction for Overdrive   Don Tillman
• [sdiy] Text books   Brousseau, Paul E (Paul)
• [sdiy] Polysix FX board...   Moho Disco
• [sdiy] Text books   Tim Ressel
• [sdiy] very ot...home wiring / grounding???   Tim Ressel
• [sdiy] Looking for part   jbv
• [sdiy] Vote for your favorite noise source   Christian Oncken
• [sdiy] very ot...home wiring / grounding???   Geoff D.
• [sdiy] Automatic gain correction for Overdrive   Peter Snow
• [sdiy] Automatic gain correction for Overdrive   Tim Ressel
• [sdiy] very ot...home wiring / grounding???   Dean Stiglitz
• [sdiy] FW: Roland TB-303 filter analysis   Dave Magnuson
• [sdiy] Mixer levels   Tim Ressel
• [sdiy] Automatic gain correction for Overdrive   Studio 271 Productions
• [sdiy] [coil] technology approves of cotton panties (fwd)   matti
• [sdiy] Addition: surface of keyboards   Batz Goodfortune
• [sdiy] Addition: surface of keyboards   cyborgzero at comcast.net
• [sdiy] Text books   hapybrian at netscape.net
• [sdiy] OT: (spy) novel use for PC board etching   KA4HJH
• [sdiy] Korg Mono/Poly   The Proteus
• [sdiy] Korg Mono/Poly   THOMAS, Mervyn
• [sdiy] Small Internal Power Supply Recommendation?   Daniel Araya
• Re: [sdiy] Addition: surface of keyboards   jhaible at debitel.net
• [sdiy] ASM1 VCO input question   Sowa Roman
• [sdiy] Mixer levels   Sowa Roman
• [sdiy] ASM1 VCO input question   Happy Harry
• [sdiy] Mixer levels   mark verbos
• [sdiy] Mixer levels   Happy Harry
• [sdiy] TR-909 mod Q   Jim Johnson
• [sdiy] Mixer levels   jhaible
• [sdiy] parts supplier for tempco rersistors/mat-02   Michael Schulze
• [sdiy] parts supplier for tempco rersistors/mat-02   Jim Patchell
• [sdiy] parts supplier for tempco rersistors/mat-02   Rob Mantel
• [sdiy] Automatic gain correction for Overdrive   Tim Ressel
• [sdiy] ASM1 VCO input question   John L Marshall
• [sdiy] Re:(sdiy) Korg MonoPoly questions   David D
• [sdiy] parts supplier for tempco rersistors/mat-02   John Blacet
• [sdiy] Addition: surface of keyboards   Dave Krooshof
• [sdiy] Korg Mono/Poly   The Old Crow
• [sdiy] Mixer levels   Tom May
• [sdiy] Korg Mono/Poly   The Proteus
• [sdiy] Mixer levels   jhaible
• [sdiy] PolyKorg Clone - 1st PCB online   jhaible
• [sdiy] Korg Mono/Poly   Magnus Danielson
• [sdiy] Korg Mono/Poly   The Old Crow
• [sdiy] Small Internal Power Supply Recommendation?   Daniel Araya
• [sdiy] parts supplier for tempco rersistors/mat-02   Neil Johnson
• [sdiy] Mixer levels   Tom May
• [sdiy] Mixer levels   jhaible
• [sdiy] The streak is over   Tim Ressel
• [sdiy] The streak is over   harry
• [sdiy] The streak is over   John L Marshall
• [sdiy] Automatic gain correction for Overdrive   patchell
• [sdiy] The streak is over   Tim Ressel
• [sdiy] The streak is over   Tim Ressel
• [sdiy] The streak is over   harry
• [sdiy] Korg Mono/Poly   Moho Disco
• [sdiy] OT: (spy) novel use for PC board etching   Rude 66
• [sdiy] Automatic gain correction for Overdrive   Fortner Florian
• [sdiy] Korg Mono/Poly   Sowa Roman
• [sdiy] newbie bead question   Bob Roesler
• [sdiy] newbie bead question   Jim Patchell
• [sdiy] newbie bead question   Happy Harry
• [sdiy] newbie bead question   René Schmitz
• [sdiy] newbie bead question   Bob Roesler
• [sdiy] Lifespan of Electrolytics?   Joe Kramer
• [sdiy] Lifespan of Electrolytics?   Paul Schreiber
• [sdiy] Lifespan of Electrolytics?   Tim Ressel
• [sdiy] opinion poll Michael Ruberto Frankentron Sound Systems   Nicholas Pelkey
• No Variac Warning! Re: [sdiy] Lifespan of Electrolytics?   Cynthia Webster
• [sdiy] Synthesizing helos   Tim Ressel
• [sdiy] Lifespan of Electrolytics?   Joe Kramer
• [sdiy] newbie bead question   Bob Roesler
• No Variac Warning! Re: [sdiy] Lifespan of Electrolytics?   Jim Patchell
• No Variac Warning! Re: [sdiy] Lifespan of Electrolytics?   oleavitt at ix.netcom.com
• [sdiy] slightly ot, DMM   Rob Mantel
• [sdiy] Lifespan of Electrolytics?   Grant Richter
• [sdiy] Re: No Variac Warning!   eric b
• [sdiy] slightly ot, DMM   John Loffink
• [sdiy] Lifespan of Electrolytics?   eric b
• [sdiy] Lifespan of Electrolytics?   Cynthia Webster
• [sdiy] Lifespan of Electrolytics?   Byron G. Jacquot
• [sdiy] Lifespan of Electrolytics?   Batz Goodfortune
• [sdiy] Lifespan of DIY musicians   Lincoln Fong
• [sdiy] Paia Fatman kit???   Stefan Johnson
• [sdiy] Re: No Variac Warning!   Ken Stone
• 570/571- vs 572 Was RE: [sdiy] Automatic gain correction for Overdrive   Batz Goodfortune
• [sdiy] ASM1 VCO input question   Michael Buchstaller
• [sdiy] Lifespan of Electrolytics?   mark verbos
• [sdiy] roland tr606 din sync error [sorted, thanks]   julian _
• 570/571- vs 572 Was RE: [sdiy] Automatic gain correction for Overdrive   jhaible
• [sdiy] Knob wanted !   Michael Buchstaller
• [sdiy] Knob wanted !   Chris Crosskey
• [sdiy] Knob wanted !   Sowa Roman
• [sdiy] Knob wanted !   John L Marshall
• [sdiy] Knob wanted !   Fortner Florian
• [sdiy] Knob wanted !   Theo
• [sdiy] Pacific Northwest Meeting?   IvanCU at aol.com
• [sdiy] Knob wanted !   Michael Buchstaller
• [sdiy] Lifespan of Electrolytics?   Barry L. Klein
• [sdiy] Pacific Northwest Meeting?   Tim Ressel
• [sdiy] How much power needs an ASM1 ?   Michael Buchstaller
• [sdiy] Pacific Northwest Meeting?   Jim Patchell
• [sdiy] How much power needs an ASM1 ?   Gene Stopp
• [sdiy] Pacific Northwest Meeting?   Tim Ressel
• [sdiy] Tempco question   Michael Schulze
• [sdiy] Lifespan of Electrolytics?   Happy Harry
• [sdiy] MG-1 Replacement Sliders/Switches/Pots? Mods?   Simon
• [sdiy] boss looper sync?   gregory zifcak
• [sdiy] Roland System 700 (or similar) knobs?   Simon
• [sdiy] Pacific Northwest Meeting?   Tim Ressel
• [sdiy] Lifespan of Electrolytics?   Joe Kramer
• [sdiy] Tempco question   Gene Stopp
• [sdiy] Tapco Sliders?   Joe Kramer
• {SPAM?} [sdiy] Tempco question   Tony Clark
• [sdiy] Moog 914 extended filter bank - inductors   Keith Winstanley
• [sdiy] Tempco question   Michael Schulze
• [sdiy] Lifespan of Electrolytics?   Steve Ridley
• [sdiy] Why Electrolytics?   Cynthia Webster
• [sdiy] Chameleon SDK v1.2 released   Vicente Solsona
• [sdiy] Pacific Northwest Meeting?   IvanCU at aol.com
• [sdiy] Motorized potentiometers?   Daniel Araya
• [sdiy] Why Electrolytics?   Jim Patchell
• [sdiy] boss looper sync?   Dave Krooshof
• [sdiy] Why Electrolytics?   Magnus Danielson
• [sdiy] Pacific Northwest Meeting?   John L Marshall
• [sdiy] Why Electrolytics?   Gene Stopp
• [sdiy] Motorized potentiometers?   phillip m gallo
• [sdiy] Paia 9720 VCO Modulator?   Diane&John Rose
• [sdiy] Why Electrolytics?   Tim Ressel
• [sdiy] Paia 9720 VCO Modulator?   Tim Ressel
• [sdiy] Oberheim DMX Battery   Synthusiast
• [sdiy] Paia 9720 VCO Modulator?   phillip m gallo
• [sdiy] MG-1 Replacement Sliders/Switches/Pots? Mods?   DTK
• [sdiy] Arp Axxe linear pots?   Ivan Schwartz
• [sdiy] Lifespan of Electrolytics?   epeasant at telusplanet.net
• [sdiy] Paia Fatman kit???   Byron G. Jacquot
• [sdiy] Lifespan of Electrolytics?   harry
• FWD:Re: [sdiy] Paia Fatman kit???   Scott Gravenhorst
• [sdiy] boss looper sync?   Dave Krooshof
• [sdiy] DIY ESR meter kit   Paul Perry
• [sdiy] Lifespan of Electrolytics?   Scott Evans, Gen Mgr
• [sdiy] Motorized potentiometers?   Sowa Roman
• [sdiy] Theremin concert Amsterdam   Wout Blommers
• [sdiy] TB3030+midibox64..latest pics   steve thomas
• [sdiy] Paia Fatman kit???   Alan W Mason
• [sdiy] Motorized potentiometers?   Jozsef Baksay
• [sdiy] Re: [AH] Theremin concert Amsterdam   Rude 66
• [sdiy] FS: Kris Rhen's Cable Emporium   Rhen, Kris
• [sdiy] TB3030+midibox64..latest pics   Beer420
• [sdiy] Building audio cables...   Rainer Buchty
• [sdiy] TB3030+midibox64..latest pics   mark verbos
• [sdiy] Building audio cables...   Tim Ressel
• [sdiy] TB3030+midibox64..latest pics   S.Thomas
• [sdiy] Last FS: Nice Panasonic Center-Detent Pots   Rhen, Kris
• [sdiy] TB3030+midibox64..latest pics   davedean at iinet.net.au
• [sdiy] TB3030+midibox64..latest pics   Trevor Page
• [sdiy] TB3030+midibox64..latest pics   Dan Gendreau
• [sdiy] Paia 9720 VCO Modulator?   John Blacet
• [sdiy] done   Gavin Mystic Satin etc.
• [sdiy] knobs?   gregory zifcak
• [sdiy] Building audio cables...   Happy Harry
• [sdiy] done   Gene Stopp
• [sdiy] TB3030+midibox64..latest pics   steve thomas
• [sdiy] Building audio cables...   Dean Stiglitz
• [sdiy] done   Tim Ressel
• [sdiy] TB3030+midibox64..latest pics   steve thomas
• [sdiy] TB3030+midibox64..latest pics   steve thomas
• [sdiy] CD4015 unused pins question   Fahl, Romeo
• [sdiy] 12v power   aurelia figeurra
• [sdiy] sync24 to midi box   Kyn Si
• [sdiy] CD4015 unused pins question   René Schmitz
• [sdiy] CD4015 unused pins question   Michael Schulze
• [sdiy] those TR909 fonts..   steve thomas
• [sdiy] CD4015 unused pins question   Tim Ressel
• [sdiy] ASM-1 Questions   Nihil Chimeraea
• [sdiy] ASM-1 Questions   Nihil Chimeraea
• [sdiy] CD4015 unused pins question   jhaible
• [sdiy] unsubscribe   expl0der at aol.com
• [sdiy] 12v power   Theo
• [sdiy] ASM-1 Questions   Magnus Danielson
• [sdiy] done   j vallier
• [sdiy] Re: ASM-1 Questions   Nihil Chimeraea
• [sdiy] Flanger???   Peter Grenader
• [sdiy] ASM-1 Questions   patchell
• [sdiy] Lifespan of Electrolytics?   Batz Goodfortune
• [sdiy] ASM-1 Questions   Scott Gravenhorst
• [sdiy] TR-808 hats   Dave Magnuson
• Antwort: [sdiy] TR-808 hats   Christian.Bergmiller at daimlerchrysler.com
• [sdiy] ASM-1 Questions   Michael Buchstaller
• [sdiy] ASM-1 Questions   jorgen.bergfors at idg.se
• [sdiy] Prophet 600 questions   greg montalbano
• [sdiy] thermistors   Michael Schulze
• [sdiy] ASM-1 Questions   René Schmitz
• [sdiy] Flanger???   Happy Harry
• [sdiy] thermistors   René Schmitz
• [sdiy] Flanger???   Gene Stopp
• [sdiy] Prophet 600 questions   Kenneth Martinez
• [sdiy] The never ending ASM-1 VCO troubles :-)   Fortner Florian
• [sdiy] Flanger???   Happy Harry
• [sdiy] Building audio cables...   Rainer Buchty
• [sdiy] The never ending ASM-1 VCO troubles :-)   Neil Johnson
• [sdiy] Flanger???   jhaible
• [sdiy] Lifespan of Electrolytics?   Happy Harry
• [sdiy] Flanger???   Gene Stopp
• [sdiy] Flanger???   Happy Harry
• [sdiy] The never ending ASM-1 VCO troubles :-)   Magnus Danielson
• [sdiy] Flanger???   jhaible
• [sdiy] Flanger???   Tom May
• [sdiy] Flanger???   Joe Kramer
• [sdiy] dial graduations   Michael Ruberto
• [sdiy] Flanger???   harry
• [sdiy] Flanger???   Byron G. Jacquot
• [sdiy] dial graduations   Don Tillman
• [sdiy] dial graduations   Sowa Roman
• [sdiy] The never ending ASM-1 VCO troubles :-)   Neil Johnson
• [sdiy] SRAM like 5101   Rainer Buchty
• [sdiy] dial graduations   Dan Gendreau
• [sdiy] weird analog multimeter   Ingo Debus
• [sdiy] thermistors   Sandro Traversi
• [sdiy] thermistors   René Schmitz
• [sdiy] thermistors   René Schmitz
• [sdiy] Lifespan of Electrolytics?   epeasant at telusplanet.net
• [sdiy] Flanger???   Ivan Schwartz
• [sdiy] Flanger???   Ivan Schwartz
• [sdiy] Photosensitive PCB's   Michael Schulze
• [sdiy] Photosensitive PCB's   oleavitt at ix.netcom.com
• [sdiy] Photosensitive PCB's   Fortner Florian
• [sdiy] Photosensitive PCB's   The Old Crow
• [sdiy] dial graduations   Michael Ruberto
• [sdiy] Photosensitive PCB's   Jim Patchell
• [sdiy] SRAM like 5101   jhaible
• [sdiy] dial graduations   steve thomas
• [sdiy] dial graduations   mark verbos
• [sdiy] LM341   mark verbos
• [sdiy] LM341   Paul Schreiber
• [sdiy] Random trigger delay?   Tim Ressel
• [sdiy] LM341   Tim Ressel
• [sdiy] Random trigger delay?   thescum at surfree.com
• [sdiy] Random trigger delay?   John Speth
• [sdiy] Random trigger delay?   Peter Grenader
• [sdiy] Random trigger delay?   Clint Davis
• [sdiy] Flanger???   eq927 at freenet.carleton.ca
• [sdiy] Introduction   Daniel Kruszyna
• [sdiy] cv joystick   Caleb Johnston
• [sdiy] Introduction   epeasant at telusplanet.net
• [sdiy] Introduction   Peter Grenader
• [sdiy] cv joystick   Gavin Russom
• [sdiy] Odd.   Geoff D.
• All you ever wanted to know about Joystcks Re: [sdiy] cv joystick   Cynthia Webster
• [sdiy] Photosensitive PCB's   Scott Bernardi
• [sdiy] cv joystick   Scott Bernardi
• [sdiy] Random trigger delay?   Tim Ressel
• [sdiy] Random trigger delay?   Tim Ressel
• [sdiy] Photosensitive PCB's   maxpowa.telenet.be
• [sdiy] Introduction   Machinerygod
• [sdiy] 3 bit A to D with hysteresis?   pfperry at melbpc.org.au
• [sdiy] 3 bit A to D with hysteresis?   jhaible
• [sdiy] Random trigger delay?   mark verbos
• [sdiy] Random trigger delay?   Paul Perry
• [sdiy] Random trigger delay?   Peter Grenader
• [sdiy] Random trigger delay?   Colin Fraser
• [sdiy] Random trigger delay?   Rude 66
• [sdiy] Motorized Faders for MIDIBOX 64   Alex
• [sdiy] Photosensitive PCB's   Nils Pipenbrinck
• [sdiy] Yamaha QX1 Sequencer   Keith Winstanley
• [sdiy] control voltage problem   Caleb Johnston
• [sdiy] Looking for a Roland MPG-80   Diane&John Rose
• [sdiy] Heeellllpppp Meeeeeee!!!!!!   Diane&John Rose
• [sdiy] control voltage problem   ElmacacoX at aol.com
• [sdiy] control voltage problem - me too   magic_silver_box!
• [sdiy] Random trigger delay?   J. Larry Hendry
• [sdiy] control voltage problem   Grant Richter
• [sdiy] solder types   Daniel Kruszyna
• [sdiy] Motorized Faders for MIDIBOX 64   david leigh
• [sdiy] solder types   patchell
• [sdiy] 3 bit A to D with hysteresis?   Batz Goodfortune
• [sdiy] solder types   John Blacet
• [sdiy] Motorized Faders for MIDIBOX 64   cyborgzero at comcast.net
• [sdiy] solder types   Grant Richter
• [sdiy] solder types   Grant Richter
• Window Comparitor [sdiy] 3 bit A to D with hysteresis?   Cynthia Webster
• [sdiy] Re: [AH] analog video synthesizers   Cynthia Webster
• [sdiy] solder types   epeasant at telusplanet.net
• [sdiy] Re: [AH] analog video synthesizers   Rotwang the Mad Inventor
• [sdiy] Re: [AH] analog video synthesizers   Synth-DIY
• [sdiy] Re: [AH] analog video synthesizers   Magnus Danielson
• [sdiy] matching of diodes   Rob Mantel
• [sdiy] [AH] analog video synthesizers   eric b
• [sdiy] MIDI to CV plan of attack   Daniel Kruszyna
• [sdiy] Formant VCO output lvl   Rob Mantel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Rob Mantel
• [sdiy] matching of diodes   patchell
• [sdiy] CVs and passive mixers   Terrence McWee
• [sdiy] MIDI to CV plan of attack   cyborgzero at comcast.net
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Oren B. Leavitt
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   harry
• [sdiy] CVs and passive mixers   harry
• [sdiy] MIDI to CV plan of attack   harry
• [sdiy] Video Synth Interface idea thingo   Ben
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tony Allgood
• [sdiy] Video Synth Interface idea thingo   Dave Krooshof
• [sdiy] [AH] analog video synthesizers   Nils Pipenbrinck
• [sdiy] Re: [AH] analog video synthesizers   paul van bavel
• [sdiy] Keeping Busy this weekend   Scott Gravenhorst
• [sdiy] Motorized Faders for MIDIBOX 64   Scott Gravenhorst
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   patchell
• [sdiy] 3 bit A to D with hysteresis?   Sowa Roman
• [sdiy] Motorized Faders for MIDIBOX 64   Sowa Roman
• [sdiy] matching of diodes   Sowa Roman
• [sdiy] MIDI to CV plan of attack   Sowa Roman
• [sdiy] MIDI to CV plan of attack   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Sowa Roman
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• RE: [sdiy] matching of diodes   jhaible at debitel.net
• [sdiy] Keeping Busy this weekend   patchell
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046)   Neil Johnson
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   René Schmitz
• [sdiy] Keeping Busy this weekend   John L Marshall
• [sdiy] Keeping Busy this weekend   Rude 66
• [sdiy] MIDI to CV plan of attack   Daniel Kruszyna
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] Motorized Faders for MIDIBOX 64   david leigh
• [sdiy] Keeping Busy this weekend   Tim Ressel
• [sdiy] Keeping Busy this weekend   Tim Ressel
• [sdiy] Keeping Busy this weekend   patchell
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Scott Bernardi
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   patchell
• [sdiy] Keeping Busy this weekend   John L Marshall
• [sdiy] MIDI to CV plan of attack   Peter Grenader
• [sdiy] [AH] analog video synthesizers   eric b
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] Keeping Busy this weekend   patchell
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   patchell
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Ian Fritz
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046)   jorgen.bergfors at idg.se
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046)   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046)   jorgen.bergfors at idg.se
• [sdiy] Motorized Faders for MIDIBOX 64   Alex
• Re: [sdiy] Temperature stable lin-exp converter with aCA3086or CA3046   jhaible at debitel.net
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Neil Johnson
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Sowa Roman
• [sdiy] small VCO core (was Temperature stable lin-exp convert er with a CA3086 or CA3046)   Sowa Roman
• Yahoo Group? [sdiy] [AH] analog video synthesizers   tpaddock at seanet.com
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046)   Ian Fritz
• [sdiy] dial graduations   Andre Majorel
• [sdiy] small VCO core (was Temperature stable lin-expconverter with a CA3086 or CA3046)   patchell
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Ian Fritz
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Ian Fritz
• [sdiy] Keeping Busy this weekend   Andre Majorel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   mark verbos
• [sdiy] small VCO core   Tony Clark
• [sdiy] Keeping Busy this weekend   Jim Patchell
• [sdiy] Voltage References...   Jim Patchell
• [sdiy] Flanger???   Gene Stopp
• [sdiy] Voltage References...   Tim Ressel
• Re: [sdiy] Keeping Busy this weekend   jhaible at debitel.net
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   John Blacet
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Gene Stopp
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Kenneth Martinez
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Tim Ressel
• [sdiy] sn76477 external control   Rude 66
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   The Old Crow
• [sdiy] dial graduations   Don Tillman
• [sdiy] Voltage References...   Tony Clark
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   John Blacet
• [sdiy] Keeping Busy this weekend   Jim Patchell
• [sdiy] [AH] analog video synthesizers   Gavin Russom
• Yahoo Group? [sdiy] [AH] analog video synthesizers   Cynthia Webster
• [sdiy] Keeping Busy this weekend   Tim Ressel
• [sdiy] Voltage References...   John Blacet
• [sdiy] Voltage References...   Tim Ressel
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   René Schmitz
• [sdiy] sn76477 external control   Rude 66
• [sdiy] Temperature stable lin-exp converter with a CA3086 or CA3046   Paul Perry
• [sdiy] Hi! and help!   Daniel Areal
• [sdiy] sn76477 external control   Dave Magnuson
• [sdiy] analog switch question   J. Larry Hendry
• [sdiy] roland mkb-200 controller   tom fitzgibbon
• [sdiy] analog switch question   patchell
• [sdiy] small VCO core   jorgen.bergfors at idg.se
• [sdiy] dial graduations   Simon
• [sdiy] [AH] analog video synthesizers   eric b
• [sdiy] Voltage References...   Sowa Roman
• [sdiy] Hi! and help!   Sowa Roman
• [sdiy] dial graduations   Andre Majorel
• [sdiy] dial graduations   John Speth
• [sdiy] sn76477 external control   Rude 66
• [sdiy] Source of Uncertainty   Scott Gravenhorst
• [sdiy] Source of Uncertainty   tpaddock at seanet.com
• [sdiy] sn76477 external control   Dave Magnuson
• [sdiy] purchasing a plus and minus 15v power supply (UK)   julian _
• [sdiy] purchasing a plus and minus 15v power supply (UK)   Neil Johnson
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Tom May
• [sdiy] [AH] analog video synthesizers   Grant Richter
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Gene Stopp
• [sdiy] Voltage References...   Tim Ressel
• [sdiy] computer soundcard mic question   Andre Majorel
• [sdiy] computer soundcard mic question   Jay Schwichtenberg
• [sdiy] computer soundcard mic question   Dean Stiglitz
• [sdiy] Source of Uncertainty   The Old Crow
• [sdiy] Source of Uncertainty   Tim Ressel
• [sdiy] Source of Uncertainty   Gene Stopp
• [sdiy] Source of Uncertainty   jhaible
• [sdiy] Son of Frankenstein system update (posting)   Peter Grenader
• [sdiy] Source of Uncertainty   Peter Grenader
• [sdiy] Source of Uncertainty   John L Marshall
• [sdiy] Source of Uncertainty   Theo
• [sdiy] Temperature stable lin-exp converter with a CA3086or CA3046   Ian Fritz
• [sdiy] Temperature stable lin-exp converter with aCA3086or CA3046   Ian Fritz
• [sdiy] Nice, cheap pots   J. Larry Hendry
• [sdiy] Foot-stompin' music (idea wanted)   Byron G. Jacquot
• [sdiy] Source of Uncertainty   harry
• [sdiy] Source of Uncertainty   harry
• [sdiy] Son of Frankenstein system update (posting)   patchell
• [sdiy] Foot-stompin' music (idea wanted)   harry
• [sdiy] Source of Uncertainty   ElmacacoX at aol.com
• [sdiy] Inexpensive 1/8" cables   Peter Grenader
• [sdiy] Inexpensive 1/8" cables   Ivan Schwartz
• [sdiy] Midwest Analog's MTS-100 Midi to CV   Peter Grenader
• [sdiy] Foot-stompin' music (idea wanted)   Paul Perry
• [sdiy] Foot-stompin' music (idea wanted)   j vallier
• [sdiy] Son of Frankenstein system update (posting)   Gavin Russom
• [sdiy] Foot-stompin' music (idea wanted)   Theo
• [sdiy] gate/trigger question   Caleb Johnston
• [sdiy] Temperature stable lin-exp converter   Tim Ressel
• [sdiy] Foot-stompin' music (idea wanted)   Tim Ressel
• [sdiy] Temperature stable lin-exp converter   jorgen.bergfors at idg.se
• [sdiy] Temperature stable lin-exp converter   Tim Ressel
• [sdiy] [AH] analog video synthesizers   Tim Ressel
• [sdiy] 2.5 Ohm trimmer   Keith Winstanley
• [sdiy] [AH] analog video synthesizers   Scott Evans, Gen Mgr
• [sdiy] uP stablized lin-exp converter   Tim Ressel
• [sdiy] uP stablized lin-exp converter   jorgen.bergfors at idg.se
• [sdiy] uP stablized lin-exp converter   Tim Ressel
• [sdiy] Temperature stable lin-exp converter   Tony Allgood
• [sdiy] 2.5 Ohm trimmer   Tim Ressel
• [sdiy] uP stablized lin-exp converter   jorgen.bergfors at idg.se
• [sdiy] Temperature stable lin-exp converter   Jay Schwichtenberg
• [sdiy] Source of Uncertainty   Neil Johnson
• [sdiy] Son of Frankenstein system update (posting)   Dave Magnuson
• [sdiy] Midwest Analog's MTS-100 Midi to CV   David Anderson
• [sdiy] Temperature stable lin-exp converter   patchell
• [sdiy] small VCO core (was Temperature stable lin-exp converter with a CA3086 or CA3046) (fwd)   Neil Johnson
• [sdiy] Temperature stable lin-exp converter   patchell
• [sdiy] Foot-stompin' music (idea wanted)   Tony Clark
• [sdiy] gate/trigger question   Takuya KATAYAMA
• [sdiy] Foot-stompin' music (idea wanted)   Studio 271 Productions
• [sdiy] uP stablized lin-exp converter   Robert Anderson
• [sdiy] gate/trigger question   thescum at surfree.com
• [sdiy] Foot-stompin' music (idea wanted)   Happy Harry
• [sdiy] US source for Hirschmann DIN headphone jack?   Jim Johnson
• [sdiy] gate/trigger question   Happy Harry
• [sdiy] Sequencer schemataics   Michael Schulze
• [sdiy] Foot-stompin' music (idea wanted)   Ken Mosley
• [sdiy] UK: Kester solder availability???   Neil Johnson
• [sdiy] Foot-stompin' music (idea wanted)   Terrence McWee
• [sdiy] unsubscribe   LBC40X at aol.com
• [sdiy] Temperature stable lin-exp converter   Jay Schwichtenberg
• [sdiy] US source for Hirschmann DIN headphone jack?   Theo
• [sdiy] Sequencer schemataics   Cynthia Webster
• [sdiy] Sequencer schemataics   Jim Johnson
• [sdiy] Foot-stompin' music (idea wanted)   Osamu (Sam) HOSHUYAMA
• [sdiy] US source for Hirschmann DIN headphone jack?   Andre Majorel
• Yahoo Group? [sdiy] [AH] analog video synthesizers   Machinerygod
• [sdiy] Voltage References...   Sowa Roman
• [sdiy] Foot-stompin' music and D D R   Peter M Blackett
• [sdiy] uP stablized lin-exp converter   Sowa Roman
• [sdiy] US source for Hirschmann DIN headphone jack?   Jim Johnson
• [sdiy] Cobalt bits for PCB drilling?   Michael Schulze
• [sdiy] Sequencer schemataics   Michael Schulze
• [sdiy] Sequencer schemataics   Michael Schulze
• [sdiy] EDN DESIGN IDEAS, May 30, 2002 (1)   Bob Gonsalves
• [sdiy] computer soundcard mic question   Batz Goodfortune

Last message date: Fri May 31 21:16:27 CEST 2002
Archived on: Tue Jun 3 23:28:05 CEST 2025

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...