[sdiy] Voltage References...

[Sowa Roman]

I like AD19x series (AD192 for 2.5V, AD195 for 5V)
Worst grade has 10ppm/K, and initial error of 0.4%.
Best 2ppm and 0.08% accordingly.
Nice thing is, they can source up to 30mA, so don't
need buffer and can serve as voltage regulator for
whole circuitry if it's not too hungry.

Roman

__-----Original Message-----
__From: Jim Patchell [mailto:patchell at silcom.com]
__Sent: Tuesday, May 28, 2002 6:17 PM
__To: synth-diy at dropmix.xs4all.nl
__Subject: [sdiy] Voltage References...
__
__
__    I am getting ready to order some voltage references...but can't
__decide what I should get.  I was using LM336-2.5's, however the
__LM4041-ADJ or LM4040 look attractive.  Anybody have any comment on
__either of these devices, or other alternatives?
__
__    -Jim
__
__
__
__
__---------------------------------------------------------
__This message has been scanned for viruses by MIMESweeper.
__
__Wiadomosc zostala sprawdzona pod katem wirusow przez
__oprogramowanie MIMESweeper.
__


---------------------------------------------------------
This message has been scanned for viruses by MIMESweeper.

Wiadomosc zostala sprawdzona pod katem wirusow przez
oprogramowanie MIMESweeper.