December 2007 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Dec 1 04:04:33 CET 2007
Ending: Mon Dec 31 22:15:13 CET 2007
Messages: 418

• [sdiy]Stereo plasma VUmeter demos...   m.bareille at free.fr
• [sdiy]Stereo plasma VUmeter demos...   m.bareille at free.fr
• [sdiy]Stereo plasma VUmeter demos...   Mike
• [sdiy]Stereo plasma VUmeter demos...   mcb, inc.
• [sdiy] test   geoff james
• [sdiy]Stereo plasma VUmeter demos...   Nicholas Gregorich
• [sdiy] jupiter 8 VCO1 problem   geoff james
• [sdiy]Stereo plasma VUmeter demos...   Mike
• [sdiy] Schematics Data I/O Unisite?   Rainer Buchty
• [sdiy] Las Vegas, NV   Tom Arnold
• [sdiy] Las Vegas, NV   John Mahoney
• [sdiy] Re: [motm] Voltage controlled version of Moog Parametric EQ circuit?   JH.
• [sdiy] Las Vegas, NV   anthony
• [sdiy] Building an Ondes Martinot or French Connection style controller?   Mike Beauchamp
• [sdiy] Building an Ondes Martinot or French Connection stylecontroller?   Ken Stone
• [sdiy] Las Vegas, NV   Scott
• [sdiy] AvrX user manual   Tom Wiltshire
• [sdiy] Good trader: Tom Wiltshire   Nicholas Gregorich
• [sdiy] WTB: CEM3320   Gil W.
• [sdiy] AvrX user manual   David Snowdon
• [sdiy] AvrX user manual   Dave Manley
• [sdiy] Good trader: Tom Wiltshire   Bob Weigel
• [sdiy] Polysynth considerations   Nicholas Gregorich
• [sdiy] Dual soundlab problems   ben bwise
• [sdiy] Polysynth considerations   jure zitnik
• [sdiy] Polysynth considerations   Jim Patchell
• [sdiy] Polysynth considerations   Bob Weigel
• [sdiy] Polysynth considerations   Nicholas Gregorich
• [sdiy] stripper recommendations   rdrake
• [sdiy] Dual soundlab problems   Dave Magnuson
• [sdiy] stripper recommendations   Paul Schreiber
• SV: Re: [sdiy] Moog Parametric?   karl dalen
• SV: Re: [sdiy] Voltage controlled version of Moog Parametric EQ circuit?   karl dalen
• [sdiy] stripper recommendations   Tim Parkhurst
• [sdiy] stripper recommendations   Dan Norris
• [sdiy] stripper recommendations   Ian Fritz
• [sdiy] Building an Ondes Martinot or French Connection stylecontroller?   Mike Beauchamp
• [sdiy] Voltage controlled version of Moog Parametric EQcircuit?   Needham, Alan
• [sdiy] stripper recommendations   neil.johnson97 at ntlworld.com
• [sdiy] stripper recommendations   GRAHAM ATKINS
• [sdiy] Building an Ondes Martinot or French Connectionstylecontroller?   Mike
• [sdiy] Technics SY-1010   James Dunn
• [sdiy] Voltage controlled version of Moog Parametric EQcircuit?   Dave Kendall
• [sdiy] AVR-X Complete   tsheets at saturn5.com
• [sdiy] Building an Ondes Martinot or French Connection style controller?   Steve Ridley
• [sdiy] Famous Fixed Filters - FFF PCB ?   Derek Holzer
• [sdiy] Prophet 5 power supply issues solved - fuse resistor frying now   Gil W.
• [sdiy] Prophet 5 power supply issues solved - fuse resistor frying now   klosmon
• [sdiy] tb303 tuning / tracking   Julian
• [sdiy] stripper recommendations   Altitude
• [sdiy] Re: Moog Parametric?   Jason Proctor
• [sdiy] Prophet 5 power supply issues solved - fuse resistor frying now   Gil W.
• [sdiy] Re: Moog Parametric?   JH.
• [sdiy] Famous Fixed Filters - FFF PCB ?   Michael Zacherl
• [sdiy] Famous Fixed Filters - FFF PCB ?   Derek Holzer
• [sdiy] Building an Ondes Martinot or French Connectionstylecontroller?   Mike
• [sdiy] Prophet 5 power supply issues solved - fuse resistor frying now   Gil W.
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   anthony
• [sdiy] Building an Ondes Martinot or French Connectionstylecontroller?   Mike Beauchamp
• [sdiy] Prophet 5 power supply issues solved - fuse resistorfrying now   Mike
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   John Mahoney
• [sdiy] Famous Fixed Filters - FFF PCB ?   Michael Zacherl
• [sdiy] Prophet 5 power supply issues solved - fuse resistorfrying now   Gil W.
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   Tom Corbitt
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   anthony
• [sdiy] Fwd: [JD-800_Tech] New JD800/990 tech and programming group   David Cornutt
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   John Mahoney
• [sdiy] sort of OT: The virtues of solid state bridgerectification vs. tube half-wave rectification   Travis Shire
• [sdiy] wanted to barter: "Novar" sockets and 6DW4B rectifier tubes.   anthony
• [sdiy] sort of OT: The virtues of solid state bridgerectification vs. tube half-wave rectification   JH.
• [sdiy] Prophet 5 power supply issues solved - fuse resistorfrying now   Mike
• [sdiy] electrolitics for pcb power input   Fernando de Izuzquiza
• [sdiy] DET3 TDA1022 Group Buy Update   Tom Bugs
• [sdiy] electrolitics for pcb power input   John Luciani
• [sdiy] Dates for Synth-DIY UK 2008   neil.johnson97 at ntlworld.com
• [sdiy] Dates for Synth-DIY UK 2008   Michael Zacherl
• [sdiy] Dates for Synth-DIY UK 2008   Andy Wilson
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   Ingo Debus
• [sdiy] TO-92 sockets   mrmike
• [sdiy] TO-92 sockets   Louis van Dompselaar
• [sdiy] TO-92 sockets   Mike
• [sdiy] TO-92 sockets   mike ruberto
• [sdiy] Resistor switching and breadboards   flightofharmony at comcast.net
• RE: [sdiy] TO-92 sockets   rdrake
• [sdiy] Resistor switching and breadboards   Dave Manley
• [sdiy] Resistor switching and breadboards   harrybissell at wowway.com
• [sdiy] Resistor switching and breadboards   John Luciani
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   Roy J. Tellason
• [sdiy] sort of OT: The virtues of solid state bridge rectification vs. tube half-wave rectification   Roy J. Tellason
• [sdiy] TO-92 sockets   Roy J. Tellason
• [sdiy] European bulk buy MIDI interface for keyboard matrix based synths   Florian Anwander
• [sdiy] Prophet 5: +5v drops to +4v   Gil W.
• [sdiy] synth case (was: Dates for Synth-DIY UK 2008)   Michael Zacherl
• [sdiy] tempco contact   gino wong
• [sdiy] tempco contact   yves usson
• [sdiy] tempco contact   harrybissell at wowway.com
• [sdiy] ARP Odyssey tempcos was: tempco contact   Nicholas Gregorich
• [sdiy] Ideal project for a cloning newbie?   John C
• RE: [sdiy] Ideal project for a cloning newbie?   rdrake
• [sdiy] Ideal project for a cloning newbie?   John C
• [sdiy] tempco contact   Brett Maddaford
• [sdiy] Ideal project for a cloning newbie?   Amos
• [sdiy] Ideal project for a cloning newbie?   Tim Parkhurst
• [sdiy] OT: mother of all surplus stores   Ken Luke
• [sdiy] Ideal project for a cloning newbie?   Tim Parkhurst
• [sdiy] lithium battery holder pcb board   nathan reeves
• [sdiy] OT: mother of all surplus stores   John L Marshall
• [sdiy] lithium battery holder pcb board   BrightBoy
• [sdiy] Prophet 5: +5v drops to +4v   Gil W.
• [sdiy] OT: mother of all surplus stores   Bob Weigel
• [sdiy] OT: mother of all surplus stores   Brett Maddaford
• [sdiy] stripper recommendations   Tony K
• [sdiy] tempco contact   Steve Ridley
• [sdiy] tempco contact   Louis van Dompselaar
• [sdiy] 723 regulator compensation question   Louis van Dompselaar
• [sdiy] 723 regulator compensation question   dragon.servicing at googlemail.com
• [sdiy] 723 regulator compensation question   Pete Swarbrick
• [sdiy] stripper recommendations   Ian Fritz
• [sdiy] stripper recommendations   John L Marshall
• [sdiy] Prophet 5 voltage mistery solved   Gil W.
• [sdiy] germanium transistors?   denshi
• [sdiy] tempco contact   Roy J. Tellason
• [sdiy] 723 regulator compensation question   Roy J. Tellason
• [sdiy] germanium transistors?   Roy J. Tellason
• [sdiy] tau ladder filter   Dave Manley
• [sdiy] Ideal project for a cloning newbie?   John C
• [sdiy] Prophet 5 voltage mistery solved   Samppa Tolvanen
• [sdiy] tau ladder filter   Jim Patchell
• [sdiy] tau ladder filter   phillip m gallo
• [sdiy] OT: mother of all surplus stores   Suit & Tie Guy
• [sdiy] tau ladder filter   phillip m gallo
• [sdiy] Prophet 5 voltage mistery solved   Gil W.
• [sdiy] RIP KH Stockhausen   jbv
• [sdiy] RIP KH Stockhausen   Magnus Danielson
• [sdiy] tau ladder filter   Fernando de Izuzquiza
• [sdiy] Jupiter 8 - all leds blink together....   Gil W.
• [sdiy] Jupiter 8 - all leds blink together....   Gil W.
• [sdiy] Prophet 5 voltage misery solved   Lars ARNWALD
• [sdiy] Prophet 5 voltage misery solved   Gil W.
• [sdiy] Jupiter 8 - all leds blink together....   Travis Shire
• [sdiy] germanium transistors?   Tom Wiltshire
• [sdiy] Ideal project for a cloning newbie?   Scott
• [sdiy] germanium transistors?   Tim Parkhurst
• [sdiy] Prophet 5 memory expansion mod   Gil W.
• [sdiy] Prophet 5 memory expansion mod   harrybissell at wowway.com
• [sdiy] LED Drops   mike ruberto
• [sdiy] LED Drops   Amos
• [sdiy] LED Drops   John Luciani
• [sdiy] LED Drops   mike ruberto
• [sdiy] Dead transformer?   Karl Ekdahl
• [sdiy] LED Drops   Roy J. Tellason
• [sdiy] LED Drops   GRAHAM ATKINS
• [sdiy] Dead transformer?   Roy J. Tellason
• [sdiy] DIN Sync   Anthony Rolando
• [sdiy] DIN Sync   Colin f
• [sdiy] DIN Sync   Nicholas Gregorich
• [sdiy] Is the 8048 in PG-200 software programmed ?   Gil W.
• [sdiy] Is the 8048 in PG-200 software programmed ?   Mike
• [sdiy] LED Drops   mike ruberto
• [sdiy] LED Drops   mike ruberto
• [sdiy] new YUSYNTH module   Yves Usson
• [sdiy] Is the 8048 in PG-200 software programmed ?   Gil W.
• [sdiy] DIN Sync   Florian Anwander
• AW: [sdiy] Is the 8048 in PG-200 software programmed ?   Ullrich Peter
• [sdiy] DIN Sync   Colin f
• [sdiy] Test...   jpdesroc at oricom.ca
• [sdiy] Push buttons to let go..   jpdesroc at oricom.ca
• [sdiy] Oberheim M1000 eproms...   Antonio Tuzzi
• [sdiy] DIN Sync/ DR-110 sync   Anthony Rolando
• [sdiy] DIN Sync   Nicholas Gregorich
• [sdiy] DIN Sync   Rainer Buchty
• [sdiy] DIN Sync   Seb Francis
• [sdiy] Plastic hat for ARP like sliders?   karl dalen
• [sdiy] Source for original Prophet 5 knobs ?   Gil W.
• [sdiy] DIN Sync   René Schmitz
• [sdiy] Source for original Prophet 5 knobs ?   GRAHAM ATKINS
• [sdiy] LED Drops   Grant Richter
• [sdiy] LED Drops   Roy J. Tellason
• [sdiy] Plastic hat for ARP like sliders?   mark verbos
• [sdiy] LED Drops   Dave Manley
• [sdiy] Plastic hat for ARP like sliders?   Travis Shire
• [sdiy] LED Drops   Nicholas Gregorich
• [sdiy] germanium transistors?   anthony
• [sdiy] AutoCAD for 'stuff'   Paul Schreiber
• [sdiy] still missing Fred Nachbaur   anthony
• [sdiy] Plastic hat for ARP like sliders?   Brett Maddaford
• [sdiy] sort of OT tube rectifier question   anthony
• [sdiy] Source for original Prophet 5 knobs ?   Bob Weigel
• [sdiy] Plastic hat for ARP like sliders?   Dave Manley
• [sdiy] Source for original Prophet 5 knobs ?   GRAHAM ATKINS
• [sdiy] germanium transistors?   Derek Holzer
• [sdiy] looking for MC14559 Successive Approximation Register   Daniel Araya
• [sdiy] looking for MC14559 Successive Approximation Register   Paul Perry
• [sdiy] DET3 TDA1022 Group Buy Update   Dump Static
• [sdiy] Plastic hat for ARP like sliders?   Barry Klein
• [sdiy] DET3 TDA1022 Group Buy Update   Scott
• [sdiy] DET3 TDA1022 Group Buy Update   Tim Parkhurst
• [sdiy] DET3 TDA1022 Group Buy Update   Altitude
• [sdiy] OT: kites, was Plastic hat...   John Mahoney
• [sdiy] DET3 TDA1022 Group Buy Update   Altitude
• [sdiy] DET3 TDA1022 Group Buy Update   Dave Kendall
• [sdiy] OT: kites, was Plastic hat...   Barry Klein
• [sdiy] DET3 TDA1022 Group Buy Update   Scott
• SV: RE: [sdiy] OT: kites, was Plastic hat...   karl dalen
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   karl dalen
• [sdiy] DET3 TDA1022 Group Buy Update   Tim Parkhurst
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   Amos
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   Amos
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   Magnus Danielson
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   m.bareille at free.fr
• [sdiy] PutiPuti ,the machine that goes POP when pressed!   Ullrich Peter
• [sdiy] DET3 TDA1022 Group Buy Update   Needham, Alan
• [sdiy] DET3 TDA1022 Group Buy Update   Rainer Buchty
• [sdiy] DET3 TDA1022 Group Buy Update   Andre Majorel
• [sdiy] DET3 TDA1022 Group Buy Update   Tom Wiltshire
• [sdiy] Source for original Prophet 5 knobs ?   Tom Wiltshire
• [sdiy] DET3 TDA1022 Group Buy Update ( minor amble off topic about currency )   Mike
• Sv: RE: [sdiy] looking for MC14559 Successive Approximation Register   Daniel Araya
• [sdiy] OT: the word of the day is harry   John Mahoney
• [sdiy] OT: the word of the day is harry   harrybissell at wowway.com
• [sdiy] Push buttons to let go..   jpdesroc at oricom.ca
• [sdiy] CGS Metalshop Builders   mike ruberto
• [sdiy] odd studio master   nathan reeves
• [sdiy] OT: the word of the day is harry   KA4HJH
• [sdiy] DET3 TDA1022 Group Buy Update ( minor amble off topic about currency )   Andre Majorel
• [sdiy] OT: the word of the day is harry   John Mahoney
• [sdiy] Opinions on multimeters?   Adam Schabtach
• [sdiy] Source for original Prophet 5 knobs ?   Bob Weigel
• [sdiy] Opinions on multimeters?   Bob Weigel
• [sdiy] CGS Metalshop Builders   mike ruberto
• [sdiy] Opinions on multimeters?   John Loffink
• [sdiy] BBD sources?   Ray Wilson
• [sdiy] BBD sources?   Louis van Dompselaar
• [sdiy] Opinions on multimeters?   Bruce
• [sdiy] Opinions on multimeters?   Ian Fritz
• [sdiy] BBD sources?   Tom Wiltshire
• [sdiy] Opinions on multimeters?   Eric Brombaugh
• [sdiy] Opinions on multimeters?   nathan reeves
• [sdiy] Opinions on multimeters?   John Mahoney
• [sdiy] Opinions on multimeters?   John Luciani
• [sdiy] Opinions on multimeters?   Ken Luke
• [sdiy] Opinions on multimeters?   John Mahoney
• [sdiy] Opinions on multimeters?   Seb Francis
• [sdiy] S-trig to V-trig converter questions   Andre Majorel
• [sdiy] S-trig to V-trig converter questions   Mike
• [sdiy] Ideal project for a cloning newbie?   Sam Ecoff
• [sdiy] Updated JH Triple Chorus BOM   mrmike
• [sdiy] S-trig to V-trig converter questions   Dave Manley
• [sdiy] Ideal project for a cloning newbie?   Tim Parkhurst
• SV: Re: [sdiy] Opinions on multimeters?   karl dalen
• [sdiy] Opinion on a scope?   karl dalen
• [sdiy] Micro rotary switch and SPDT   karl dalen
• [sdiy] Opinion on a scope?   Tim Parkhurst
• [sdiy] Opinion on a scope?   Veronica Merryfield
• SV: Re: [sdiy] Opinions on multimeters?   Seb Francis
• SV: Re: [sdiy] Opinion on a scope?   karl dalen
• [sdiy] Measuring equipment!   karl dalen
• [sdiy] Prices on test equipment!   karl dalen
• [sdiy] USB o-scope - just FYI   Steffen Juul
• [sdiy] USB o-scope - just FYI   Needham, Alan
• [sdiy] power supply   Dump Static
• [sdiy] power supply   Paul Schreiber
• [sdiy] Cpacitor whine   flightofharmony at comcast.net
• [sdiy] power supply   Paul Perry
• [sdiy] hammond issues   bill bigrig
• [sdiy] hammond issues   jays at aracnet.com
• [sdiy] power supply   Dump Static
• [sdiy] wire glorious wire   anthony
• [sdiy] hammond issues   Jay Schwichtenberg
• [sdiy] wire glorious wire   Tim Parkhurst
• [sdiy] wire glorious wire   John L Marshall
• [sdiy] power supply   Needham, Alan
• [sdiy] wire glorious wire   Ken Stone
• [sdiy] Precision rail to rail op amp suggestion?   John Loffink
• [sdiy] wire glorious wire   Travis Shire
• [sdiy] Opinions on multimeters?   Adam Schabtach
• [sdiy] wire glorious wire   harrybissell at wowway.com
• [sdiy] wire wrap wire   Mike
• [sdiy] wire wrap wire   John Luciani
• [sdiy] Looking for Prophet 5 bottom/rear panel   Gil W.
• [sdiy] soldering iron problem   Anthony Rolando
• [sdiy] soldering iron problem   harrybissell at wowway.com
• [sdiy] soldering iron problem   BrightBoy
• [sdiy] soldering iron problem   Ian Fritz
• [sdiy] soldering iron problem   Nicholas Gregorich
• [sdiy] Velleman HPS10SE Portable Scope   klosmon
• [sdiy] soldering iron problem   KA4HJH
• [sdiy] soldering iron problem   Barry Klein
• [sdiy] soldering iron problem   Brett Maddaford
• [sdiy] Fwd: Velleman HPS10SE Portable Scope   klosmon
• [sdiy] soldering iron problem   John L Marshall
• [sdiy] wire glorious wire   anthony
• [sdiy] wire glorious wire   Dave Manley
• [sdiy] soldering iron problem   Travis Shire
• [sdiy] Hi everyone!   Sean Ellis
• [sdiy] soldering iron problem   Ingo Debus
• [sdiy] Freescale DSP kit   Barry Klein
• [sdiy] Freescale DSP kit   Tom Wiltshire
• [sdiy] Freescale DSP kit   Joe Grisso
• SV: Re: [sdiy] Freescale DSP kit   karl dalen
• [sdiy] Heat shrink tubing driving me crazy....   Tom Adam
• [sdiy] KN-75 optocoupler   anthony
• [sdiy] Heat shrink tubing driving me crazy....   anthony
• [sdiy] soldering iron problem   anthony
• [sdiy] soldering iron problem   Amos
• [sdiy] KN-75 optocoupler   Dan Norris
• [sdiy] Heat shrink tubing driving me crazy....   jays at aracnet.com
• [sdiy] Heat shrink tubing driving me crazy....   Dave Manley
• [sdiy] soldering iron problem   Anthony Rolando
• [sdiy] Heat shrink tubing driving me crazy....   Peter Keller
• [sdiy] Heat shrink tubing driving me crazy....   BrightBoy
• [sdiy] Heat shrink tubing driving me crazy....   Julian
• [sdiy] soldering iron problem   Amos
• [sdiy] Heat shrink tubing driving me crazy....   Dave Kendall
• [sdiy] Heat shrink tubing driving me crazy....   jays at aracnet.com
• [sdiy] Heat shrink tubing driving me crazy....   John L Marshall
• [sdiy] KN-75 optocoupler   anthony
• [sdiy] cable for 3.5mm patch cables   Anthony Rolando
• [sdiy] s[diy] heat shrink driving me crazy   bill bigrig
• [sdiy] cable for 3.5mm patch cables   Gerald Stevens
• [sdiy] cable for 3.5mm patch cables   Tom Arnold
• [sdiy] Davies 1900H Uh oh....   Sam Ecoff
• [sdiy] Heat shrink tubing driving me crazy....   jure zitnik
• [sdiy] Davies 1900H Uh oh....   mark verbos
• [sdiy] Davies 1900H Uh oh....   Tom Arnold
• [sdiy] Hacking a JL Cooper CS-10   Altitude
• [sdiy] MAM sq16 manual   Sean Ellis
• [sdiy] MAM sq16 manual   Julian
• [sdiy] MAM sq16 manual   Sean Ellis
• [sdiy] KN-75 optocoupler   Paul Perry
• [sdiy] Davies 1900H Uh oh....   BrightBoy
• [sdiy] KN-75 optocoupler   John L Marshall
• [sdiy] KN-75 optocoupler   Tom Wiltshire
• [sdiy] Davies 1900H Uh oh....   Sam Ecoff
• [sdiy] ca3140   gino wong
• [sdiy] ca3140   Travis Shire
• [sdiy] Heat shrink tubing driving me crazy....   Barry Klein
• [sdiy] Heat shrink tubing driving me crazy....   Seb Francis
• [sdiy] Video Synth...   np
• [sdiy] KN-75 optocoupler   np
• [sdiy] Peace on Earth   DrHeqx
• [sdiy] KN-75 optocoupler   Gene Stopp
• [sdiy] KN-75 optocoupler   Magnus Danielson
• [sdiy] Heat shrink tubing driving me crazy....   DTK
• [sdiy] Lab antics and Synthacons (was KN-75 optocoupler)   Gene Stopp
• [sdiy] Heat shrink tubing driving me crazy....   Dave Kendall
• [sdiy] Heat shrink tubing driving me crazy....   Roy J. Tellason
• [sdiy] Heat shrink tubing driving me crazy....   Ken Stone
• [sdiy] Video Synth...   Ingo Debus
• [sdiy] Video Synth...   Tom Wiltshire
• [sdiy] Good trader - Jan Czmok   Dave Kendall
• [sdiy] Good trader - Matthias Hermann (fonik)   Dave Kendall
• [sdiy] Video Synth...   Magnus Danielson
• [sdiy] Lab antics and Synthacons (was KN-75 optocoupler)   mike ruberto
• [sdiy] Improvement to a Viscount cathedral organ   Gil W.
• [sdiy] Improvement to a Viscount cathedral organ   Ken Stone
• [sdiy] Improvement to a Viscount cathedral organ   Gil W.
• [sdiy] KN-75 optocoupler   Colin Hinz
• [sdiy] avrsyn 2007.12.22 released   Daniel Kruszyna
• [sdiy] Improvement to a Viscount cathedral organ   Travis Shire
• [sdiy] Improvement to a Viscount cathedral organ   Ingo Debus
• [sdiy] Improvement to a Viscount cathedral organ   Gil W.
• [sdiy] Merry X-mod.   Mattias Rickardsson
• [sdiy] EFM rxcv-pro binary request   jure zitnik
• [sdiy] Happy Christmas to one and all!   Neil Johnson
• [sdiy] Merry Christmas   JH.
• [sdiy] Merry Christmas   Magnus Danielson
• [sdiy] Merry Christmas   Synth at charlielamm.com
• [sdiy] Merry Christmas   Samppa Tolvanen
• [sdiy] Merry Christmas   Magnus Danielson
• [sdiy] Merry Christmas   Rainer Buchty
• [sdiy] Seasons Greetings   TJ
• [sdiy] Davies 1900H Uh oh....   Sam Ecoff
• [sdiy] Merry Christmas to All   Ray Wilson
• [sdiy] Drill Press and Crimpers?   Jeff Farr
• RE: [sdiy] Drill Press and Crimpers?   rdrake
• [sdiy] Drill Press and Crimpers?   Dave Magnuson
• [sdiy] Japanese language speakers: help with creating business name?   anthony
• [sdiy] Drill Press and Crimpers?   Roy J. Tellason
• [sdiy] Drill Press and Crimpers?   Ben Lincoln
• [sdiy] Drill Press and Crimpers?   Andre Majorel
• [sdiy] Drill Press and Crimpers?   John Luciani
• [sdiy] Drill Press and Crimpers?   John Loffink
• [sdiy] Improvement to a Viscount cathedral organ   Gil W.
• [sdiy] KN-75 optocoupler   anthony
• [sdiy] Resistance Controlled Synthesizer   mike ruberto
• [sdiy] FS, FT some stuff!   Anthony Rolando
• [sdiy] FS, FT some stuff! SOLD   Anthony Rolando
• [sdiy] Moog ladder high pass   Sean Ellis
• [sdiy] Moog ladder high pass   Sean Ellis
• [sdiy] Hosting for DIY projects   Sean Ellis
• [sdiy] Hosting for DIY projects   John Mahoney
• [sdiy] Hosting for DIY projects   Tom Arnold
• [sdiy] Hosting for DIY projects   Sean Ellis
• [sdiy] Moog ladder high pass   Samppa Tolvanen
• [sdiy] VCO Accuracy   Tom Adam
• [sdiy] VCO Accuracy   John Mahoney
• [sdiy] VCO Accuracy   Scott
• [sdiy] VCO Accuracy   Seb Francis
• [sdiy] VCO Accuracy   Grant Richter
• [sdiy] VCO Accuracy   John Mahoney
• [sdiy] Heat Gun Recommendation?   Sam Ecoff
• [sdiy] Heat Gun Recommendation?   Tom Arnold
• [sdiy] Heat Gun Recommendation?   Paul Schreiber
• [sdiy] VCO Accuracy   Andre Majorel
• [sdiy] VCO Accuracy   Tom Wiltshire
• [sdiy] Heat Gun Recommendation?   Ben Lincoln
• [sdiy] VCO Accuracy   harrybissell at wowway.com
• [sdiy] Heat Gun Recommendation?   harrybissell at wowway.com
• [sdiy] Heat Gun Recommendation?   BrightBoy
• [sdiy] Japanese language speakers: help with creating business name?   harrybissell at wowway.com
• [sdiy]: a good panel partner for Analog Shift Register   Anthony Rolando
• [sdiy]: a good panel partner for Analog Shift Register   Jason Proctor
• [sdiy]: a good panel partner for Analog Shift Register   Sean Ellis
• [sdiy] Heat Gun Recommendation?   GRAHAM ATKINS
• [sdiy] Japanese language speakers: help with creating business name?   anthony
• Parts indecision about ASR (was: Re: [sdiy]: a good panel partner for Analog Shift Register)   anthony
• [sdiy] OT: busting out the old vinyl (Including Switched on Bach)   anthony

Last message date: Mon Dec 31 22:15:13 CET 2007
Archived on: Fri Apr 1 13:38:41 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...