Re: [Simmons Drums] New hexabod
2010-03-05 by jesper
... Congrat s and welcome! ... I have no part number but both my SDS-1 s suffered the same when I bought them. Just open the unit and check the back of the pot
Messages
Browse messages
Page 70 of 172 · 8595 messages matched
New hexabod
2010-03-05 by Jonathan
Hello, Somewhat unexpectedly I won an SDS9 set and am now getting together the missing odds & ends. One of the main problems is that the click pot knob has
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-05 by jesper
... XLR contacts were really expensive. No wonder so few keyboard synthesizer lack them. I think I only own three which supports XLR out: Chroma, Avatar and
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-03 by Michael Buchner
We could do a german month, Jesper! This means, you accept only blogs in proper german language: XLR Kabel haben keine positiven oder negativen Pins, weil es
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-03 by jesper
Hi list, neither Michael nor me has english as our first language. That sure lays a good foundation for misunderstandings. Here s what I meant: ... OK, you
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-03-02 by Jacquot.Patrice@free.fr
kleine filou ... :-)
oops- iPhone Simmons App
2010-03-02 by rubbus
Oops- I didn t include the subject- I was replying about that iPhone app- there s only one Simmons kit in there unfortunately. I do
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-02 by Michael Buchner
As I said: They WERE expensive THESE DAYS, only switchcraft being available. And the female XLR was half as much more than the male, like shoes in a shoe shop
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-01 by jesper
... Thanks for the lesson! All my XLR-cables are marked either 2+ or 3+ to allow for easier patching... (Though I still wonder about that SDS-7 with serial
Re: [Simmons Drums] (unknown)
2010-03-01 by jesper
... *Haha* I m no big kit guy either... I like Braaaiiins! ;) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-01 by Michael Buchner
I always wondered about these resistors, but finally I was told the story: Old live mixing consoles had their multicores and -multipin connectors wired hard to
(no subject)
2010-03-01 by superwolle70
ONLY - ONE - SIMMONS - KIT????? Jesper, could you please block this poor creature? He is unworthy...
Re: Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-01 by jesper
... I know, and I just cut them close to the soldering joint. It sure helped! When racked you see the inside from the top of the unit since the cover is
(no subject)
2010-03-01 by Robert
kind of disappointing unfortunately. only one Simmons set...
Betr: Re: [Simmons Drums] cranking up the SDS-V output
2010-03-01 by Berk Aarts
this is not about the pads, this is inside the module! Seems the pinning on the XLR is wrong, maybe this is also giving less output since you use a patchbay??
Re: [Simmons Drums] cranking up the SDS-V output + pedal issue
2010-03-01 by jesper
HOLY SMOKE! That sure kicked the hell out of the poor input stage of the mixer (though it did survive). Is there a similar crank mod for the SDS-7 maybe? I m
XLR wiring on SDS-V
2010-03-01 by jesper
...and as a reply to the previous Q regarding which is hot on a SDS-V I d been clever enough to apply a sticker to mine which I then had forgotten it says:
Re: [Simmons Drums] cranking up the SDS-V output
2010-03-01 by jesper
Found the message again, it was Michael s and written back in Sept 2006: To get a fat output (line level), remove all seven 68 ohm resistors on the backpanel
Hello from The San Francisco Bay area
2010-03-01 by spindrum
Hi Everyone - Nick here from Northern California. I m new here and just wanted to say hi to everyone. I actually joined up a few weeks ago but have not had a
Re: [Simmons Drums] and now the simmons iphone app
2010-03-01 by Adam Calaitzis
I particularly like the stick marks on the pads. Actually I hooked my iphone up to the studio speakers, it sounds quite good for what it is.
cranking up the SDS-V output
2010-03-01 by jesper
Hi, I found an old mail tucked away where someone among our gods (can t find it again) described that the resistors at the XLR outputs might be removed to
Re: [Simmons Drums] and now the simmons iphone app
2010-03-01 by jesper
... Funny, especially since the screenshot shows the Linn 9000 and the SDS-V is barely visible in the list... Soon the teenagers where I work will be running
Re: [Simmons Drums] Re: red sds-9 set on swedish auction site
2010-03-01 by jesper
Woops, my bad. I was too speedy there... :) ... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
and now the simmons iphone app
2010-03-01 by Adam Calaitzis
http://itunes.apple.com/au/app/vintage-drum/id357399828?mt=8 Adam Calaitzis adamcal@ozemail.com.au www.toyland.com.au
Re: red sds-9 set on swedish auction site
2010-03-01 by simmons_drums
Not a bad price although only the kick pad is SDS-9, the other pads are SDS-8.
red sds-9 set on swedish auction site
2010-02-28 by jesper
http://www.tradera.com/Simmonspads-4-toms-1-kick-auktion_108024406 1500 SEK as buy it now... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] SDSV new user
2010-02-28 by d.conley@rocketmail.com
Wolfgang has a spare cover for me so no worries about sending dimensions Jasper. Thanks anyway. For trigger XLR wiring, is it pin 2 = hot and the rest are
Question regarding the Simmons MTM
2010-02-28 by Dean
Hi, I am very curious about the MTM s kit function. Is the hi-hat decay amount identified on the MIDI part or is it just analog variable resistor signals only
Re: [Simmons Drums] SDSV new user
2010-02-27 by jesper
... I soldered myself, as I often do. Cheaper and easier in many ways. When it comes to trigging oudon t need any fancy wire either. ... Top and sides are one
Re: [Simmons Drums] SDSV new user
2010-02-26 by d.conley@rocketmail.com
Hi Jesper Thanks for the reply. Does this mean you had custom jack-XLR cables made to trigger your V from the SDS8 pads? I want to try and get a new cover
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-26 by Thomas Heckmann
I ve got that, too...I modified the modulation on the Synth channel to get more and faster modulation... the Clap is a bit like the Boss Handclapper, but good.
Re: [Simmons Drums] SDSV new user
2010-02-26 by jesper
... One more thing. My SDS-V came with a extra jack in one of the front blinds. It was just soldered in parallell with the rest. I sold the panel off with
Re: [Simmons Drums] SDSV new user
2010-02-26 by jesper
... Congrat s! ... Sounds almost like my Simmons start. V + 8-pads. From now on you re stuck! :D ... Bass and similar sometimes surface on Ebay. It s worse
SDSV new user
2010-02-25 by d.conley@rocketmail.com
Hi all, first post for me :) Just received my dream drum system... an SDSV. I ve had the pads from an SDS8 for some time now and I ve been using a Roland brain
Re: SDSV U.S.A VOLTAGE
2010-02-25 by tomdw2003
Hi Alfonso, I use a 100W 240v to 120v adaptor for my USA spec SDSV, it works fine. The spec sheet in the SDSV manual rates the unit at 11VA (approx. 11W) so
Re: SDSV U.S.A VOLTAGE
2010-02-25 by tomdw2003
Hi Alfonso, I use a 100W 240v to 120v adaptor for my USA spec SDSV, it works fine. The spec sheet in the SDSV manual rates the unit at 11VA (approx. 11W) so
Re: [Simmons Drums] Please Help with Portakit
2010-02-25 by Eduardo Ojeda
No, the problem was the lack of having Delete All . After I did, it went back to normal. ... From: Patrice Jacquot Subject: Re:
Re: [Simmons Drums] SDSV U.S.A VOLTAGE
2010-02-24 by Andy W
HI Alf, Yes, you would need a transformer - UK Voltage is now 220V AC at 50Hz, it was 240V AC when the SDSV was designed, but it works at 220V AC. USA Voltage
Re: Betr: [Simmons Drums] SDSV U.S.A VOLTAGE
2010-02-24 by Andy W
Hi Berk, The Simmons unit I have is a UK model 240V 50Hz. A suitable step-up transformer would suffice to use this model outside the UK Correct me if I am
Re: [Simmons Drums] Simmons SDSV
2010-02-24 by Andy W
Hi Jimmy, Any reasonable offer would be considered, though as I am receiving a few emails about it, I ll have to see. Regards Andy.
Re: [Simmons Drums] Simmons SDSV
2010-02-24 by Andy W
Hi Hauke, Well, any reasonable offer would be considered - I seem to be getting a few emails about them, so I would have to see. Regards Andy.
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-24 by jesper
... 204 that is... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by jesper
... I ve owned 305, 305, 500 but have only kept the 206 because of the clap. unfortunately it suddenly failed me and I haven t had time to check it out. The
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by Thomas Heckmann
Of course the TS305...I sold my first one in 1994, but couldn t resist it with this price :-) The sequencer is also cool and worth having from Tama... ...
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by Patrice Jacquot
absolutely... yes I agree, ...the SOUND kicks & that s why we re here ;-) but not all spotty teenagers know that for the moment... the day they will, then the
TMI battery?
2010-02-23 by Sonic Amigos Support
I have a Simmons TMI that no longer can keep its memory when shut off. It needs a new battery. I tried to change it, but I m not sure what kind of replacement
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by jesper
... I have hopes of CEM s and SSM s getting re-made just like so many other odd parts of the past. Also, I have synths which are a decade or so older
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by Thomas Heckmann
;-) as usual I keep the stuff I m buying for MAKING MUSIC ! But a trade for your SDS III is always considered...hahahaha ... Thomas P. Heckmann Trope
Re: [Simmons Drums] Please Help with Portakit
2010-02-23 by Patrice Jacquot
So it was well the battery not charging enough ... !? ... [Non-text portions of this message have been removed]
Re: Betr: Re: [Simmons Drums] bloody absurd
2010-02-23 by Patrice Jacquot
Ah ah Thomas ... ;-) Congratulations for the tama... How much would you sell it for then ?