Re: [Simmons Drums] Please Help with Portakit
2010-02-16 by jimstew37
The Clear All function does reset the Portakit to factory settings, as near as I can tell. Not that I ve owned my Portakit since new, but this is what I ve
Messages
Browse messages
Page 72 of 172 · 8595 messages matched
[Simmons Drums] Re: Eproms blowing ?
2010-02-14 by Ed
My mistake, Michael. I just figured that the eprom king would have a copy of everything Simmons. Looking forward to the V hat eprom!
Betr: Re: [Simmons Drums] Sillicon mallet schematics or service manual
2010-02-14 by Berk Aarts
cool you still need the scematics?? My mac won t go, so I m searching older files now I know for sure I ve stored somewhere else also. Greetins Berk
Re: [Simmons Drums] Simmons SDSV
2010-02-14 by jesper
... Please take all price discussions/haggling offlist. If Andy has a fixed price, feel free to tell the list though. -- electronically yours, jesper - -- ---
Re: [Simmons Drums] Simmons SDSV
2010-02-13 by Jimmy Earnshaw
Hey Andy, I d be interested, what are you asking? Jim ... From: Andy Subject: [Simmons Drums] Simmons SDSV To:
Re: [Simmons Drums] Re: Eproms blowing ?
2010-02-13 by Michael Buchner
Ooh, no, I don t have copies of the operating systems, but Thierry EPPHERRE has. The reason is: I could not copy 2732 Eproms until now. The first 2732 I ever
Re: Eproms blowing ?
2010-02-12 by Ed
A very good idea, Patrice. I would guess Michael Buchner has a lot of this covered. If that s not the case, I can upload MTM v3 and v4 data as well as SDS7 v9
Re: [Simmons Drums] Simmons SDSV
2010-02-12 by Hauke Harm
Hi Andy! Actually I would be interested. Any idea how much you would like for it? Shiping to Hamburg/Germany? Bye Hauke ... [Non-text portions of this message
Re: [Simmons Drums] Sillicon mallet schematics or service manual
2010-02-12 by derrick simpson
Thanks Berk, The tech s name is Jeff and I have reminded him of your help from before........Jeff runs a tech company called EARS of New York city. He is
Eproms blowing ?
2010-02-12 by Jacquot
Hi Group ! A question for the active technicians of our group... as we entered in the black electronic period about capacitors (20 years...we should change
Simmons SDSV
2010-02-12 by Andy
Hi All, just like to say hello to everyone here and I mention that should anybody be interested in my Simmons SDSV kit - I might be pursuaded to part with it.
Betr: [Simmons Drums] Sillicon mallet schematics or service manual
2010-02-11 by Berk Aarts
Bert?? or BerK? yes it was me, and your tech would contact me to help me out?? never mind, I ll forward it to you off forum To give everyone the credit they
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-11 by jesper
... Nice! Mecano is a forgotten gem, too bad they re turned into crap in the late 80 s and the 90 s. -- electronically yours, jesper - -- --- ---- ----- ----
Re: [Simmons Drums] Please Help with Portakit
2010-02-11 by Eduardo Ojeda
Thanks for the advice. I will perform a Clear All function and test again. No, I don t have a SysEx dump. Thanks again, Ed. ... From: superwolle70
Re: [Simmons Drums] Please Help with Portakit
2010-02-11 by superwolle70
Page 84 in the manual says: CLEAR is a utility function which allows any kit, song or sequence to be initialised with it s default settings . The default
Re: [Simmons Drums] Please Help with Portakit
2010-02-11 by Eduardo Ojeda
Thanks Patrice, I have read the manual from head to toe and there is not a parameter that could be set for this. Regards, Ed. ... From: Patrice Jacquot
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-11 by ALFONSO PACHES
Hi Amazing video. Warren Cann great. Here you can see Warren and Hans Zimmerman live as guest stars of Spanish band called MECANO in 1984
Re: [Simmons Drums] Please Help with Portakit
2010-02-11 by Patrice Jacquot
there might be a sort of triggering gate time to set or something like that ... ... [Non-text portions of this message have been removed]
Please Help with Portakit
2010-02-11 by Eduardo Ojeda
Does anybody know a procedure to reset a Portakit to factory settings? After a battery replacement, I am having problems triggering notes from external pads.
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-10 by Thomas Heckmann
...and the keyboarder is Hans Zimmer...nice setup as well ! ... Thomas P. Heckmann Trope Recordings - AFU limited - AFULAB
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-10 by jesper
So much better then! :D ... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-10 by WT
Warren Cann indeed.... WT ... From: jesper To: Sent: Wednesday, February 10, 2010 3:20 PM
Re: [Simmons Drums] SDS-V in great old Ronny clip
2010-02-10 by WT
Warren Cann on Simmons perhaps ;) WT ... From: jesper To: Sent: Wednesday, February 10, 2010
SDS-V in great old Ronny clip
2010-02-10 by jesper
Great voice and amazing that she only made three singles back in the days... (I still miss one of the 12 I think...) Enjoy:
Sillicon mallet schematics or service manual
2010-02-09 by derrick simpson
Hi Guys, I believe you were helpful to me in the past in acquiring a schematic and service manual for my mallet machine....if this info is still out there
hello
2010-02-08 by Jonathan
Hi, Just joined the group, to get a feel for the world of Simmonds drums as I would like to acquire a set. I suspect though they cost rather more than I can
Re: [Simmons Drums] Re: SDE factory patches
2010-02-07 by jesper
... It often comes with size if you ask me. The smaller the unit, the bigger the problems. SDS-6 may be the biggest exception to the rule. :) -- electronically
[Simmons Drums] Re: SDE factory patches
2010-02-07 by Susie
Thanks for the tip Jesper. I had a PSU problem with my Novation Drumstation just as you describe. I ll check it out. I do have a manual, but there s no mention
Re: [Simmons Drums] Re: 110 -> 220 volts
2010-02-07 by jesper
... So basically, yes... :) I need to sort out how to rewire then. Maybe the easiest would be to pull both MTMs out of the rack and compare then. ...
Re: [Simmons Drums] Re: SDE factory patches
2010-02-07 by jesper
... So, receiving is OK and editing too. ... With the description above I don t think this matters. Something is rotten in the SDE. ... No manual? ... But if
Re: [Simmons Drums] Re: grettings to all members
2010-02-07 by jesper
... Recently this groups has grown quite a lot and I admit new members on a nearly daily basis. Just a few years ago there popped up SDS-V s for sale from now
Re: [Simmons Drums] Re: grettings to all members
2010-02-07 by brian walker
Hi Alfonso ... Yea but I ll win cus I got more mates than you hav But seriously welcome aboard the tree of Simmons knowledge Brian [Non-text portions of this
Re: 110 -> 220 volts
2010-02-07 by and.1234
hello all this is whats know as a toroidal mains transformer it will have twin 115 volt primary windings now the primary windings are connected in parallel for
Re: SDE factory patches
2010-02-06 by Susie
An update... It looks like it is now saving data, as I can make changes, switch off, and those changes are there when I switch on again. However, I m still
Re: grettings to all members
2010-02-06 by Susie
Alfonso, I think if anyone ever sells an SDSV on here there will be quite a fight! (me included) :-) Welcome to the group! Susie
110 -> 220 volts
2010-02-06 by jesper
Hi list, I used google translate and got the word ring core transformer , does that mean anything to you guys? Anyway, the circular transformer type in most
grettings to all members
2010-02-06 by ALFONSO PACHES
Hi I´m a new member at this forum. I hope enjoy with all the tips and any kind of information about Simmons. I have an sds9 kit in white with seven pads , a
SDE factory patches
2010-02-05 by Susie
Hi, I ve just taken delivery of an SDE. I think the battery has gone - all I m getting is different flavours of digital noise on the patch outputs. The control
Re: PROMS and SDS1
2010-01-27 by Robert D
4 EPROMS have been sold. These remain (all original): EP 60 Steel Drum EP 91 Power Snare Electronic Tom Cabasa I ve decided to sell the remaining 4 and the
Re: [Simmons Drums] Re: PROMS and SDS1
2010-01-25 by jesper
... 1-10 dollars each, if we re talking ebay and originals. ... A bit on the steep side if you ask me. I payed 400 SEK (ca 60 USD) for both my pads and a
Re: PROMS and SDS1
2010-01-25 by Robert D
Wow, there is a lot more interest than I expected. Everyone is asking for pricing for the EPROMs, which is a fair question but, I have no clue! I ve been
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by the_green_dome
... Not blind. Just like me - easily confused! I m lucky, both my SDS1s came with the cover over the knobs. Although one keeps falling off each time I hit
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by the_green_dome
... Once again, you are a genius. I ll give that a try. Thanks Michael! Aaron
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by jesper
... I m bloody blind! I was talking about the darn cover over the knobs. I do in fact have the battery covers... I think. ;) -- electronically yours, jesper -
Re: [Simmons Drums] PROMS and SDS1
2010-01-24 by Michael Buchner
Yes, I am interested in some, but it depends on the price. What do you like to have? Or trade? Best Michael ... From: Robert D To:
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by Michael Buchner
There are two possibilities: Do it yourself (it is really not very difficult) or try some fuse - holder lids. I once had fuse holders with a lid that fits on
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by jesper
... Well, I bought my two pads very cheap from a friend and the pads were battered, with broken potentiometers and all... But yes, they surface without covers
Simmons T-Shirts
2010-01-24 by Chris
Just spotted these on ebay when doing the daily Simmons search:
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by the_green_dome
... If you are missing two, this answers my question - they are rare!!! Aaron
Re: [Simmons Drums] SDS-1 battery cover
2010-01-24 by jesper
... If you find any, let me know. I miss two... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se