Sequencer Power
2002-05-22 by klown_mr
Hi-- I m looking into a mp7(gotta love the purple), but the main use i would have it for is a sequencer, both for studio and live use. It would be sharing
Messages
Browse messages
Page 416 of 476 · 23796 messages matched
Changing Presets
2002-05-22 by constantradius
Can anyone tell me how to save a pattern in which you change the preset that is assigned to each channel? I have a pattern that I made, but the presets stink
Darragh OToole is out of the office - back 23/05/02
2002-05-22 by Darragh OToole
I will be out of the office from 20/05/2002 until 23/05/2002. I will respond to your message when I return.
S/PDIF
2002-05-21 by Nick Rothwell
XL-7 S/PDIF ing into a Roland VM3100Pro desk: works fine. XL-7 S/PDIF ing into an OasysPCI: appears to work fine. (Literally: on-screen VU s show signal,
Re: [xl7] [OT] Midi Merging
2002-05-21 by Nick Rothwell
... Never tried the MOTU on a PC - sorry. No obvious timing issues on the Mac. -- nick rothwell -- composition, systems, performance -- http://www.cassiel.com
Re: [OT] Midi Merging
2002-05-21 by ezra_gold
I was able to use the MOTU interface for a while but as my computer system got more complex the MOTU started having more and more problems. In the begining the
RE: [xl7] Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by Andre Lewis
If you do get around to implementing it, perhaps you could compress and pre-send messages with a timestamp in order to keep the timing rock solid. I believe
RE: [xl7] Re: [OT] Midi Merging
2002-05-21 by Andre Lewis
... Ok i am running WinMe (Probably shifting to 2000) and the MOTU has software that runs on it to configure it but you can t actually use it as a computer
Re: [xl7] Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by David Jones
Definatly. It would be very nice. However, between my scanner, my printer, my camera, my smart media reader, my Midiman Oxygen 8 Keyboard, my Roland Ua - 30
Re: [xl7] Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by Scott Ruda
... Not currently. We realize this is a desirable feature, but technically this is very difficult to achieve. We are prioritizing USB development efforts with
Re: [OT] Midi Merging
2002-05-21 by ezra_gold
My imperssion is that the computer interface is the big difference between the eMagic and the MOTU. Both seem reliable as independent patchbays. You should
Re: [xl7] Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by David Jones
I don t have my MP7 yet but a question - Does the USB port thing ACT as a MIDI port as well? ... From: Scott Ruda To: xl7@yahoogroups.com Sent: Tuesday, May
Re: [xl7] Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by Scott Ruda
... As stated in the E-Loader documentation (as well as various other places), OS Download is not supported via USB, only via MIDI. USB is used for performance
RE: [xl7] [OT] Midi Merging
2002-05-21 by Andre Lewis
I will. I ve been looking at the MOTU and the eLogic but I don t want to shell out the cash for em if they aren t going to work. ... From:
RE: [xl7] [OT] Midi Merging
2002-05-21 by Andre Lewis
... Do you have it working on a PC? How s the timing?
Re: Where i can find XL7 USB Drivers for my PC.
2002-05-21 by nbaryosef100
Ok, I installed the E-Loader but when I connect my USB cable to the computer and to the XL7. They don t recognize each other so I couldn t update my OS, so I
Re: [xl7] Where i can find XL7 USB Drivers for my PC.
2002-05-21 by Scott Ruda
... The USB drivers are part of the E-Loader 1.1 release, which can be downloaded from: . Read the installation
Where i can find XL7 USB Drivers for my PC.
2002-05-21 by nbaryosef100
Where i can find the XL7/MP7 USB Drivers for my PC. I couldn t find it on my origanl CD that i got with my XL7. If someone can upload it to the files section,
Re: [xl7] [OT] Midi Merging
2002-05-21 by Nick Rothwell
... With Opcode dead, you re basically looking at Emagic or MOTU. I don t know anything about the high-end Emagic Unitor interfaces, but have used a few of the
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by Nick Rothwell
... I believe the answer is yes to both (truncating or zero-extending as necessary) - certainly I can run optical S/PDIF from my 24-bit desk to my 16-bit
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by Nick Rothwell
... Nae probs: I misinterpreted your comment. (Some people have reported that they ve managed to plug AES/EBU and S/PDIF stuff together, which is why I was
Re: [xl7] NOTE
2002-05-21 by Kay Stephane
Nice, thanks! -- Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com
RE: [xl7] DOWNLOADING A BANK
2002-05-21 by Kay Stephane
...And if you have a loosy USB chipset on your moterboard, you just can sit down and cry... With USB or not, the problem is that handling a stand-alone bank
Re: XL-7 S/PDIF format?
2002-05-21 by forneau
Scott- Thanks for the information. (digital out is 20-bit, 44.1kHz) What happens to this signal at the receiver end? If the device says it supports 16-bit
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by erik_magrini@Baxter.com
Also, I thought all the internal processing after the filters was 24bit (maybe I m thinking of other gear), why drop it to 20bit for the outputs? rEalm forneau
[OT] Midi Merging
2002-05-21 by Andre Lewis
Anyone know of a decent midi patchbay? I have two Opcode patchbays but they aren t exceptionally usefull now that they aren t supported and I can t get
Re: [xl7] [OT] Midi Merging
2002-05-21 by erik_magrini@Baxter.com
Let me know if you find anything, a friend of mine is in the same quandry with his Opcode interfaces... rEalm Andre Lewis 05/21/02
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by erik_magrini@Baxter.com
Sorry, I was only referring to SPDIF in the XX-7 s (with regards to SCMS) not all SPDIF AES/EBU issues. Thanx though! rEalm Nick Rothwell
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by Nick Rothwell
... Technically, S/PDIF and AES/EBU have a different impedance and voltage swing. One can run S/PDIF with the copy code stuff (SCMS) disabled. -- nick rothwell
RE: [xl7] DOWNLOADING A BANK
2002-05-21 by erik_magrini@Baxter.com
OK, It is possible to SAVE AN ENTIRE BANK selectng the PATTERN BANK, But Get All sequences is producing 128 .mid files and not some unique bank file. ...
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by erik_magrini@Baxter.com
You don t need a special connector for AES Pro, XLR just happens to be the most common. I believe the only difference is how the digital copy protection crap
Re: [xl7] NOTE
2002-05-21 by erik_magrini@Baxter.com
It (that info) is in the OS1.17 addendum. Also, if you hold down ENTER while scrolling in the Note Edit page, you can sroll through your notes without having
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by Nick Rothwell
... I didn t have a chance to try that since I was upgrading the OS from 1.01, which predates the USB support. Now I m on 1.31 I ll try it. Btw, this might be
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-21 by Scott Ruda
... It s 20 bit, 44.1kHz. Note that this information is essentially encoded into the signal, so a receiver should be able to auto-detect the format without
Re: XL-7 S/PDIF format?
2002-05-21 by forneau
Yes, I tried setting to AES/Pro and that didn t work either. Actually, I didn t expect AES/Pro to work since a different connector (XLR) is involved. The
Re: [xl7] Re: XL-7 first impressions
2002-05-20 by Nick Rothwell
... Oh, OK - I didn t notice them! So I guess the Xilinx is the control chip? (As you can probably tell, I know zilch about digital hardware...) ... Hmm;
Re: NOTE
2002-05-20 by synthesis77
... Tip: you can also hold Home/Enter and turn the wheel. This does the same thing as dialing the field (stepping through notes/events) and has the
Re: XL-7 first impressions
2002-05-20 by synthesis77
... Oh no... the Xilinx chip actually handles very little. There are no fewer than 7 high powered E-mu ASICs in there! To do all the processing they re
Re: [xl7] NOTE
2002-05-20 by Nick Rothwell
... Page 89 in Revision D of the manual (downloadable from the E-mu site). No sign of it in the Revision A manual that came with my unit. I m wondering: are
NOTE
2002-05-20 by Stéphane KAY
Hi On my opinion, the most useful basic feature of the XL-7 is under EDIT PATERN / NOTE - You can select a note of the specified track (T...), if you put the
RE: [xl7] midi files
2002-05-20 by Stephane KAY
Hi Sorry, I should have some problems with my midi patch-bay with sysex messages. Thanks for your tip. S. ... De : erik_magrini@Baxter.com
test2
2002-05-20 by Aaron Eppolito
still trying...
test
2002-05-20 by Aaron Eppolito
sorry to bother you guys with a test message, but we ve been unable to get list traffic since early last week... -Aaron
RE: [xl7] DOWNLOADING A BANK
2002-05-20 by Stephane KAY
Hi. Thanks for your reply ! I just want to point out two different problems. #1 is about banks of PATTERNS, #2 about banks of PRESETS. #1 is not very
Re: Arpeggiators not sending externally
2002-05-20 by ezra_gold
You need to set the channel with the arp you want to play to send midi internal only. The arp send should be setup the way you have it. Play the arp and the
Re: [xl7] Somebody has XL7/MP7 Cubase Mixer Map ???
2002-05-20 by Nick Rothwell
... On a related note, what s the current story wrt. getting the XL-7 sysex spec.? -- nick rothwell -- composition, systems, performance --
Somebody has XL7/MP7 Cubase Mixer Map ???
2002-05-20 by nbaryosef100
can anyone create XL7/MP7 Cubase Mixer Map, if we can not find one. to be used for Mixer map for control of XL7 synth parameters.. Thank you
Re: Very weird (but useful) feature suggestion!
2002-05-20 by nifflas
LoL! =) //Nifflas ... piano ... new ... So ... already ... has ... visual
Re: [xl7] Re: XL-7 S/PDIF format?
2002-05-20 by erik_magrini@Baxter.com
Did you try setting the SPDIF in the XL-7 to prefessional and not consumer mode? Or vice versa as your situation requires... rEalm forneau
RE: [xl7] Very weird (but useful) feature suggestion!
2002-05-20 by Andre Lewis
Well they do have a USB port, they could hook it up to a USB flatscreen and keyboard ALA Macintosh... ... From: nifflas [mailto:nifflas@musician.org] Sent: