Emu XL-7 & MP-7 User's Group

Yes, the receiving gear is set to external digital sync.

The Roland UA-30 cannot handle 24-bit, so if the XL-7 is 
outputting 24-bit, then this device will most likely not work.

However, both the AW2816 and the EMI 2|6 can do 24-bit, so I 
don't know what else to try. These devices work fine receiving 
16-bit 44.1kHz from the Electrix Repeater, BTW.

Will try calling Emu. 

Thanks-
-Forneau

--- In xl7@y..., erik_magrini@B... wrote:
> I believe it's 24bit/44.1kHz.
> 
> As for the other gear, you have their digital sync set to S/PDIF 
and not 
> master or internal, right?
> 
> rEalm
> 
> 
> 
> 
> 
> forneau <forneau@y...>
> 05/19/02 02:09 PM
> Please respond to xl7
> 
>  
>         To:     xl7@y...
>         cc: 
>         Subject:        [xl7] XL-7 S/PDIF format?
> 
> 
> Hi-
> 
> What is the bit width and sample rate of the XL-7 S/PDIF 
output?
> 
> I've searched the archives for this info and can't seem to find it.
> 
> I can't get the digital output to work with any of the following:
> 
> 1) Yamaha AW2816 hard disk recorder
> 2) Emagic EMI 2|6 USB audio interface
> 3) Roland UA-30 USB audio interface
> 
> None of these devices recognize the signal coming from the 
XL-
> 7. I am using the correct (expensive) coaxial cable for digital 
> signals.
> 
> Any other hints on what's necessary to set this up correctly will 
> be appreciated.
> 
> Thanks-
> Forneau
> 
> 
> 
> 
> To unsubscribe from this group, send an email to:
> xl7-unsubscribe@y...
> 
>  
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/
info/terms/