Yahoo Groups archive
Messages
Page 1 of 476 · 23796 messages matched
2019-11-21 by smw-mail@...
A funny thing has been happening--people who have never been interested in E-Mu gear oriented interest groups before are coming out of the woodwork wanting to
2019-11-13 by bgutman@...
I ve read it, and there s no solution or workaround in that thread either )) So, it seems like it is what it is. I consider it a bug because what s recorded is
2019-11-12 by smw-mail@...
It seems like in 2014 I was correct in interpreting the setup and goals (as posted in Gearslutz and here). It also looks like I did relevant testing that I
2019-11-12 by smw-mail@...
FYI: https://groups.yahoo.com/neo/groups/xl7/conversations/topics/23853 https://groups.yahoo.com/neo/groups/xl7/conversations/topics/23853 Looks like the
2019-11-12 by smw-mail@...
From the referenced 2014 Gearslutz thread: No matter what I set Rechannelize input to, it always seems to record incoming midi data from ANY channel into
2019-11-12 by smw-mail@...
I am not sure it qualifies as a genuine bug. To me it seems more like a design decision to record midi data (notes, CCs, etc.) on all channels and to not have
2019-11-12 by bgutman@...
Thank you Steve. Alas, this seems like a bug in the sequencer, and not some configuration setting that I ve missed. I found a thread on Gearslutz describing
2019-11-11 by smw-mail@...
PS: If you just want to exclude some channels from the full MultiA recording, perhaps you could just explode it to individual channels and use the
2019-11-11 by smw-mail@...
Thanks for the clarifications. They make sense with my assumption that MIDI Enable settings are MIDI = Sound Module settings. So, if all incoming MIDI data
2019-11-10 by bgutman@...
Hi folks, Maybe you can help me solve a strange conundrum. I m trying to use the XL-7 slaved to my master sequencer (MPC1000), which is also sending data to
2019-11-01 by smw-mail@...
Note: Conversations and Message History are going away. To me conversations are posts and message history is the searchable archived posts. I expected the UI
2019-11-01 by D F Tweedie
Steve ... I ve forwarded you directly off group an email I received as a Yahoo Moderator. It clearly states that private groups will persist. Please consider
2019-10-28 by D F Tweedie
Steve ... This is not an objection per se ... I could not care less if anyone read my posts. But, won t this lead to endless I made $17,223.45 last month
2019-10-28 by GARY HIGGINS
ok by me
2019-10-27 by xl7@yahoogroups.com
Enter your vote now! https://groups.yahoo.com/neo/groups/xl7/polls/poll/19616165 archiveteam.org is attempting a large scale archive of Yahoo group content
2019-10-27 by xl7@yahoogroups.com
Enter your vote now! https://groups.yahoo.com/neo/groups/xl7/polls/poll/19616165 archiveteam.org is attempting a large scale archive of Yahoo group content
2019-10-27 by smw-mail@...
I just found out about the following. If there are objections I see 2 options (1) not to invite this group to make the archives public or (2) people who don t
2019-10-27 by smw-mail@...
These issues sound very familiar. Not sure if I wrote some things possibly related here or in the P2K thread. I have one day to look for my posts to see if I
2019-10-20 by xl7@yahoogroups.com
Enter your vote now! https://groups.yahoo.com/neo/groups/xl7/polls/poll/19615999 What features of the soon-to-disappear Yahoo! XL-7 Group do you value most?
2019-10-20 by xl7@yahoogroups.com
Enter your vote today! A new poll has been created for the xl7 group: What features of the soon-to-disappear Yahoo! XL-7 Group do you value most? Created by:
2019-10-20 by smw-mail@...
... Let me add, I do not have (or have the technical skills to install and run) a bulletin board/discussion forum, but as far as resources (documents and
2019-10-18 by smw-mail@...
Re: The FB Command Station Group. Now that MZ has come out in favor of freedom of speech, perhaps he will be opening up all private FB groups so they will
2019-10-17 by D F Tweedie
Steve ... Another group I belong to has been looking at group.io, a site allegedly started by the creator of Yahoo.groups. Purportedly there is ability for
2019-10-17 by smw-mail@...
For what its worth, I just did a test post in the forum section of Encyclotronic:
2019-10-17 by richard brown
Thanks for everything Steve, Bruno and all.. Your contributions over the years are and have been very much appreciated... richard nedialsko bg
2019-10-17 by smw-mail@...
Good suggestions. ... I have also seem people use Microsoft s One Drive to share docs. As well, there seems to be quite a number of bulletin board packages. I
2019-10-17 by smw-mail@...
They did change this since I saw it: Attention: Starting December 14, 2019 Yahoo Groups will no longer host user created content on its sites. New content can
2019-10-16 by D F Tweedie
Steve ... More thinking ... probably dangerous. From what I read, the group isn t closing ... just the ability to store content is. So why not just get a drop
2019-10-16 by smw-mail@...
Since the FB Proteus group allows the general public to read the posts (i.e., we don t have to sign up for a FB account), I looked at posts (not replies) back
2019-10-16 by smw-mail@...
IMO there are some excellent threads related to using E-Mu gear at gearslutz. From what I have seen, muffwigglers appeals more to DIYers.
2019-10-16 by smw-mail@...
No facebook for me. Its hard to tell who is more evil, facebook or verizon. JMO.
2019-10-16 by smw-mail@...
Not sure if this will get posted. I wrote a farewell message abut 20 minutes ago, and it has not shown up yet. The Yahoo Groups Banner says: Starting
2019-10-16 by smw-mail@...
Someone from a group I subscribe to alerted me to the coming end of an era; just passing on the info. (See below.) I have enjoyed this group first as a
2019-07-15 by tarkan.sahin78@...
any news to that?
2019-07-10 by Fred Smith
Thanks for the tip that was very useful!yes will explore the midi changes in multi-set ups.Cheers!!
2019-07-09 by rs6000jade@...
Thank you Ray your advice was spot on, the midi issue is now cleared up. All good again talking with Ableton!! Cheers!!
2019-07-08 by shook norris
3 command stations Virus-free.
2019-07-08 by shook norris
ive got that message in all 2 command stations ive had and all were fine
2019-06-06 by Ray Bellis
... I m in the middle of an implementation of the E4 version of this that should be live on my emu.tools site some time in the next week or so. Once that s
2019-06-06 by smw-mail@...
... Footnote: Over the past 2 days I have been mining my Cakewalk/Sonar files from 15 + years to pull out all the preset banks and presets I had stored in them
2019-06-05 by Ryan Cameron
Sorry to bump this thread after the fact, but I am in agreement with DF. While reading all these posts I could help but think with every email that is would be
2019-05-26 by smw-mail@...
CONGRATULATIONS!!!!!! Maybe my partially trashed P2500 SIMM can become usable in a P2500/CS again one of these years! :-). Maybe even with new, improved
2019-05-26 by smw-mail@...
Thanks for chiming in with some excellent insights, Ray. For what its worth, I found a version of the table of ROM resources I mentioned from 2012. I probably
2019-05-26 by Ray Bellis
... The ROM name is in the baby flash, offset 0x40 - 0x44. The SIMM checksum is also there (offset 0x00 - 0x03) and the ROM number is at offset 0x2f. Here are
2019-05-26 by smw-mail@...
As far as I have seen, you are absolutely correct: Preset ROM ID number in the manual refers to a two-byte number with the MSB as the ROM Identifier and the
2019-05-26 by smw-mail@...
Addendum to what I said about MSB = 17 SIMMS (P2500, PROM, etc.): Earlier this year I picked up an MSB = 15 SIMM. It shows ups as MP-7 in my P2500, OS 2.0.
2019-05-26 by smw-mail@...
I am balancing doing studio setup/refinements and outdoor/yard work (it is beautiful!). So: Re: ID numbers/names: some numbers are reused; e.g. 17 is the MSB
2019-05-26 by rpcfender@...
Any corrections or additions to this list of ROMs and ROM numbers? 0 = User 2 = XTREM 3 = Audity 4 = Composer 5 = Protozoa 6 = B3 7 = XL-1 8 =
2019-05-26 by smw-mail@...
Ahhhh. If will give this a try tomorrow. BTW, instead of Unknown for Flash ROMs, can you access the name? or maybe use the numerical ID [aka MSB]? Not
2019-05-26 by rpcfender@...
EmuLib I have added code to switch to the Direct ROM access method when the Bank is 0,1,2,3. Otherwise it uses the Edit Buffer method for higher ROM banks.