Re: [Digital BW] Re: from a 7800 to 3880?
2015-07-08 by David Whistance
No it doesn’t have vacuum feed. I’ve always thought of the 3800/3880 as essentially a larger desktop printer as opposed to the professional models which
Yahoo Groups archive
Messages
Page 28 of 2186 · 109257 messages matched
2015-07-08 by David Whistance
No it doesn’t have vacuum feed. I’ve always thought of the 3800/3880 as essentially a larger desktop printer as opposed to the professional models which
2015-07-08 by jeff.grant@...
No vacuum feed on the 3880.
2015-07-08 by Matt Haber
Does the 3880 have a vacuum feed? The paper feed on the 3880 is certainly better than the 1430.However many here will likely have little reason to print
2015-07-08 by Dr. Elliot Puritz
Enough to really matter? I wonder. Sent from my iPhone
2015-07-08 by Dr. Elliot Puritz
Thanks Paul. From a practical viewpoint for small volume printing what are the advantages of the 3880 vs. the 2880 and the current 1430? Certainly not the ease
2015-07-08 by Paul Roark
Where you live and whether you can transport your printer to a good repair shop are obviously important variables when it comes to large printer repairs. I
2015-07-08 by hrblaine@...
Didn t I read that the 800 has a very high D Max? In a message dated 7/8/2015 12:16:59 P.M. Eastern Daylight Time, DigitalBlackandWhiteThePrint@yahoogroups.com
2015-07-08 by Dr. Elliot Puritz
Others will have more knowledge about printers than I have. Certainly the 3880 is a great printer and likely has a few features that are missing from the
2015-07-08 by arlenelove3@...
The reason I am abandoning my 7800 is because Epson makes it impossible to repair old printers. Parts are not available. The certified person who used to
2015-07-07 by Jacques Caron
Thanks Paul! Found it very odd too! Since this 1430 never leaked (nor the cartridges) I was a bit puzzled by this empty cartridge problem. I refilled the two
2015-07-07 by Paul Roark
I wonder if the Epson repair people are instructed to encourage the purchase of new printers. Hopefully Epson will have parts for its printers for quite a
2015-07-07 by Paul Roark
Very odd. I ve never seen that on the two 1400s I ve had for years. I would have guessed the reservoir plugs were not sealing. When I have the reservoie
2015-07-07 by James A. Strain
Arlene - I just read a review of the P800 on Luminous LandscapeÆs website. It was effusive with its praise of B&W performance on premium lustre paper, but
2015-07-07 by arlenelove3@...
After talking to Epson repair people, I ve decided to abandon my 7800 printer and downsize to a 17 wide. In the 17 wide printers, which one is best for B&W
2015-07-07 by Jacques Caron
Thanks David That s one thing I did (the shutdown and restart) because each time I refill the cartridges I get some air bubbles and this is one trick that I
2015-07-07 by David Kachel
Shut down and restart. If that fails, run a cleaning cycle. The 1430 is just strange that way. Mine does the same thing, David Kachel ___________________
2015-07-07 by jacques.caron@...
Hi I m using an Epson 1430 with EB6 standard inks; my problem : I fill all the cartridges but… two days later, without printing, the black and yellow
2015-07-07 by jeff.grant@...
Thanks Elliot, I have plenty of flush, in fact, I have another 700ml bottle on the way so I can hibernate my 3880 when I m away. With the 3880, I never put the
2015-07-06 by Dr. Elliot Puritz
Do you have the flush solution that is available from MIS, IJM, and others? You will need to have one set of carts dedicated to the flush Jeff. After printing
2015-07-06 by Dr. Elliot Puritz
OK....Let s solve the problems... Before changing any carts would you mind printing 10 pages with the color inks? Sent from my iPhone
2015-07-06 by Jeff Grant
Hong Kong, I must learn to stop talking in abbreviations. Cheers, Jeff www.jeff-grant.com Facebook: Jeff Grant Landscape Photographer
2015-07-06 by paulmwhiting@...
Um, sorry, but what s HK ? Paul
2015-07-06 by jeff.grant@...
I ve just ordered another 1430. I m reminded of that old saying about madness being the doing of the same thing and expecting different results. I ll report
2015-07-05 by paulmwhiting@...
Elliot, I agree with you (and IJM) on annual replacement... sometimes I m too cheap, and then suffer expensive consequences. Thanks for that reminder! Paul
2015-07-05 by jeff.grant@...
Thanks Elliot. That s the plan.
2015-07-05 by Dr. Elliot Puritz
You are correct Jeff. Swapping inks on the 1430 is very easily done. I would strongly suggest that if you buy another 1430 that you consider buying an extra
2015-07-04 by Jeff Grant
I just don t understand how I could have had 4 sets of carts that all leaked or let in air. I guess that it points to the printer or operator error. I really
2015-07-04 by Dr. Elliot Puritz
If I recall correctly, IJM recommends replacing carts after about a year. If one buys OEM carts and inks then obviously the carts are replaced every time one
2015-07-04 by paulmwhiting@...
Thanks, Jeff. Of course! InkjetMall, why didn t I think of that. I know that site and have ordered empty refillable carts from them for my 1400. I first
2015-07-03 by Mark Friedman
Hello I ve Shared a secure file Document attached with Google icon CLICK DOCUMENT Regard Mark Friedman *Private Group Group
2015-07-02 by jeff.grant@...
Hello Paul, IJM is InkjetMall which is the retail and support site for Jon Cone s Piezography ink sets. It is a bit of an archaeological dig but there are some
2015-07-02 by paulmwhiting@...
Hello Jeff, Please tell me what IJM stands for... sounds like a site I should get to know! Thanks! Paul
2015-07-02 by Jeff Grant
Hi Bharat, Do you do the same for refilling carts? I have just been looking at the IJM site and they say to leave the air vent open when refilling, and make no
2015-07-02 by jeff.grant@...
Thanks Bharat, That s excellent info and different to what I was doing. Have you used different carts with this method? Cheers, Jeff
2015-07-01 by Bharat Patel
Hi, Has any one done a QTR profile for Innova FibaPrint WM using Eb6 on Epson 1400? Thanks Bharat Hi, Has any one done a QTR profile for Innova FibaPrint WM
2015-07-01 by Bharat Patel
HI, I had leak problems with my Epson 1400 and MIS inks. I replace the printer and also the cartridges but problem continued. Then it dawn on me that I must
2015-07-01 by Bharat Patel
HI, I had leak problems with my Epson 1400 and MIS inks. I replace the printer and also the cartridges but problem continued. Then it dawn on me that I must
2015-06-30 by jeff.grant@...
Thanks Elliot. I ll get back to you if I take it further.
2015-06-30 by Elliot Puritz
Let me know if I can help in anyway Jeff. I will do my best. Feel free to email me privately. Elliot From: DigitalBlackandWhiteThePrint@yahoogroups.com
2015-06-29 by jeff.grant@...
Thanks Elliot. I ll see if I can lay my hands on another one. I really wanted the 1430 to work for a few reasons.
2015-06-29 by Elliot Puritz
Hi Jeff: The Cone carts most assuredly work in the 1430. Elliot From: DigitalBlackandWhiteThePrint@yahoogroups.com
2015-06-29 by jeff.grant@...
Richard, they are about the only cart that I didn t try. Maybe I was unlucky with my 1430. I just couldn t get them to retain ink and exclude air. I ve sold my
2015-06-28 by richard@...
Jeff, I had a lot of problems getting the MIS Ink Supply cartridges that came with the Eboni 6 kit recognized by my 1430—they worked for a few weeks, but
2015-06-26 by jeff.grant@...
Thanks Elliot. I put a lot of time into the 1430 before giving up and selling it. I don t think that I did anything wrong along the way. I followed the
2015-06-26 by Elliot Puritz
Hi Jeff: I have used the Cone Carbon in the 1430 using the Cone carts without any issues at all. I have also used the MIS Carbon inks in the Ink Jet carts
2015-06-26 by jeff.grant@...
Apologies for butting into this thread but I m fascinated to hear how to get a 1430 to work. I recently bought a new Australian model1430. I used two
2015-06-26 by m venz
Thanks for that Paul, that s helpful. Michael. To: DigitalBlackandWhiteThePrint@yahoogroups.com From: DigitalBlackandWhiteThePrint@yahoogroups.com Date: Thu,
2015-06-26 by Paul Roark
MIS sells Eboni-6 here: http://www.inksupply.com/eb6.cfm It is compatible with virtually all Epson printers. Aside from the 1400/1430, however, you need to
2015-06-25 by bakerstrt@...
Hi Paul Do you know whether MIS sells this ink (Eboni with C6b base) mixed or is the ink they have available only for the 1400 etc? Thanks Michael
2015-06-18 by Homer Shannon
I looked at the Wikipedia listing for this movie then searched for the movie trailer to see what the imagery look like. It is at