Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Mark
... I prefer to keep the funk in my music :) I also never understood why some designers like to show off tubes through little windows. It s not like they are
Messages
Browse messages
Page 52 of 66 · 3299 messages matched
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Scott Deyo
Oh, I just noticed the 1U in your email :) Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Scott Deyo
Tube VCA: So what kind of layout would you like to see? A simple 1U or maybe a 2U w/ a window for the tube? Since the tube doesn t glow, that may be a bit odd,
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Mark
I bought a Tau PCB, but I m not sure what I want to do with it. Anyway, since you asked, I would like to see a 1U MOTM format panel for the CGS65 Tube
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Scott Deyo
I hope to have Tau Pipe panels in three weeks. I meet w/ my metal guys on Monday. So far on this run: Tau Pipe DotCom Optic CV Processor DotCom Wave
Re: [ModularSynthPanels] CGS 02 .fpd out there ?
2007-08-25 by Scott Deyo
Gino, what are you using to clock it? Do your VCOs go high enough? Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: [ModularSynthPanels] CGS 02 .fpd out there ?
2007-08-25 by Scott Deyo
Hi Gino! I made an FPE panel a few years ago. It works great, though I had to file the edges of the rect. cutout a tiny bit. The design is on a PC in what used
CGS 02 .fpd out there ?
2007-08-25 by gino wong
I just made up 4 complete Cat Girl wavetable kits with rom, rev1 board and display adaptor. One is fully built up onto a plastic temporary panel and I like it
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by gino wong
Is this an .fpd or will it have to dropped into platten and scaled ? On 10 Aug 2007 07:32:50 -0000, ModularSynthPanels@yahoogroups.com
Tau Pipe panels
2007-08-09 by wjhall11
With help from mrmike, Scott Deyo, and Jurgen, we designed a MOTM panel for the Tau Pipe. We then interpreted that design to a rack-mount version (for my
RE: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels, motm format - revised
2007-08-08 by John Loffink
Nice work! I ll go for your 5U version. John Loffink The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com The Wavemakers Synthesizer Web Site
Re: [ModularSynthPanels] wanted 3 pot long stooge bracket
2007-08-07 by contact@bridechamber.com
Thanks, Hans! They are the same dimensions as the Stooge 3-pot long. The pot-mounting area is just a bit narrower. I also have a couple old Stooge 3-pot longs
Re: [ModularSynthPanels] wanted 3 pot long stooge bracket
2007-08-07 by loopcycle
Paul, Have you checked out Scott s 3-pot bracket (bridechamber.com)? It might work for your project...they are fairly large. I dont have them in front of me,
wanted 3 pot long stooge bracket
2007-08-07 by krisp
Hi all sorry about cross posting but I need some 3 pot long stooge bracket for some projects ive got going Im in the UK but will pay shipping from anywhere
Re: TLN-712 Doomsday Machine panels, motm format - revised
2007-08-07 by wjhall11
Hi all - we got email from Scott suggesting a revision which we ve implemented. We had the scaling on the offset pots wrong - now they re -5 to +5 instead of
New Wave Multiplier PCBs!
2007-08-07 by Scott Deyo
Hello group, I ve got some new CGS Wave Multiplier PCBs. They re double-sided, w/ board-mounted pots in MOTM spacing, and trimmers for the Real Ring Mod! Check
Re: TLN-712 Doomsday Machine panels, motm format
2007-08-06 by wjhall11
A late contribution - here s a MOTM design based on what we believe is completly standard spacing. 5U wide - but also therefore has space for 4 jacks Scott
Re: CGS panel
2007-08-06 by dhamaryder
... This is very helpful. thanks a lot.
MOTM-like panels and modules for sale
2007-08-05 by jan@czmok.de
Hi, selling off some of my (unused) panels: - OAKLEY EFG, 1U Version - PT2395 DELAY 1U Version (with non-completed PCB from ken stone) asking 15 EUR per the
Re: [ModularSynthPanels] CGS panel
2007-08-05 by Richard Brewster
You can read about my VCO project here. http://www.pugix.com/cgs-vco.htm You should think about panel features you want for your CGS VCO. There many options
Re: CGS panel
2007-08-05 by clickmrmike
FYI, I use FPD on an Intel Max (Parallels/WinXP) without problems. I m rather stunned at the number of CAD programs that work under Parallels, including Rhino,
Re: [ModularSynthPanels] CGS panel
2007-08-05 by Jason Proctor
yes, despite promises the Mac version of the FPE designer app is not yet available. if you have an Intel Mac, you could run it with Parallels or Boot Camp,
CGS panel
2007-08-05 by dhamaryder
Hi guys and girls, I just joined this site because I heard it was possible to get panel designs. I looked through the files section and there sure are a good
Re: [ModularSynthPanels] Re:update
2007-07-31 by Scott Deyo
I didn t mean to whine; I was very angry at myself! But I m all better now :) I knew there were a lot of PCBs/ possible modules out there, but it seems I hear
Re:update
2007-07-31 by Todd Fletcher
I m sure if you put a washer between the panel and the rails nobody would ever know. cheer up scott, and make a Thomas Henry SN Voice Panel! Thanks, Todd
update
2007-07-30 by Scott Deyo
hello, the metal is at the painters/ silkscreeners and will be done within a week. anyone who wants a Neural Agonizer panel can order now. they are only $20,
[ModularSynthPanels] Doug w/Stoogepanels...
2007-07-27 by James Elliott
Doug, I ve been trying to get a hold of you over the past week and a half regarding the neural agonizer panel + bracket. I don t know if you ve gotten my
Re: [ModularSynthPanels] Re: MFOS panels?
2007-07-26 by Scott Deyo
I hope to, but not if Doug makes that decision superfluous and unwise :) The NA panels are going to the paint/silkscreen guys Monday at the latest. Should be a
Need some panels...
2007-07-25 by wjhall11
Will and I need some panels. A 120R, a 320R, a couple Telluns. How do we order from you, Doug? Thanks much. Bill and Will
Re: MFOS panels?
2007-07-25 by brownchonald
Scott, Will you ever have any other MFOS panels in the future? Cole
Re: [ModularSynthPanels] [motmpanels] 0.2 mm engraving tool
2007-07-22 by Richard Brewster
There is paint fill to consider, too. The relative boldness of the lettering is related to both the engraving tool size and the paint fill. I have some 0.4mm
[motmpanels] 0.2 mm engraving tool (was: Re: Hello)
2007-07-21 by loopcycle
... Hi Samppa, Look a bit farther up in the thread where this was pointed out: http://www.retrosynth.com/slideshow/baah02/ In the photo on the upper right hand
Re: [ModularSynthPanels] [motmpanels] 0.2 mm engraving tool (was: Re: Hello)
2007-07-21 by Jason Proctor
i have two oakley VCOs side by side in my rig - one has the 0.4mm engraving and one has the 0.2mm engraving. i put up some pics so you can get a general idea
Re: [ModularSynthPanels] [motmpanels] 0.2 mm engraving tool (was: Re: Hello)
2007-07-21 by Samppa Tolvanen
... Hey, How do the engravings compare? Can You people make scans from the panels made by FPE with information about fonts / engarving options used? Samppa
[motmpanels] 0.2 mm engraving tool (was: Re: Hello)
2007-07-21 by loopcycle
Im bumping this thread because I found it extremely useful. I m preparing an FPE panel for a gated comparator and will be using 0.2mm for the text engraving.
cgs gated seq cv add on
2007-07-19 by wright
aloha folks - lookin at some of the panels folks have uploaded for the gated seq - looks great. i m making a sort of 19 panel version - but i was wondering if
Re: [ModularSynthPanels] MFOS panels?
2007-07-18 by Scott Deyo
Hi Cole, I ve got the VCO (and S&H), but not the others.... Cheers, Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: MFOS panels?
2007-07-17 by brownchonald
Hi Doug, I m looking for: x3 VCO x2 ADSR x2 VCLFO x1 VCLPF Thanks, Cole
Re: [ModularSynthPanels] MFOS panels?
2007-07-17 by Doug Wellington
... Which ones are you interested in? -- -Doug http://www.analognotes.com http://www.stoogepanels.com http://www.dougwellington.com
MFOS panels?
2007-07-17 by brownchonald
Why aren t there any Music From Outerspace panel files around? Anyone have any? Cole
RE: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by Scott Juskiw
I believe the PKES70 knobs would fit on my 3U panel, but there wouldn t be enough finger space to actually grab onto a knob and turn it (not comfortably,
RE: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by John Loffink
I was thinking of a 4U Doomsday Machine panel, using the PKES70 knobs instead of the PKES60. The PKES70 are about 3/4 inch in diameter and a good compromise
Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by wjhall11
Hey Doug - OK, OK - we d like a TLN-712 Doomsday Panel. But we also want some others - a TLN-156 Neural Agonizer - a TLN-867 Tuner & Headphone Monitor - a
Re: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by Doug Wellington
... Yeah, I know... There s only so much time in the day... Sigh... I do have a better appreciation now for everything Paul Schreiber does... -- -Doug
Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by clickmrmike
Ahhhhh.... you have a Midibox SEQ panel? Dude, you seriously need to update the panel list...I ve been contemplating spending way too much on a panel for one
Re: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by Doug Wellington
... I ll make you a panel for only $64.95...what a bargain! ;-) ... Actually, I went to a larger screen and I m averaging a half dozen designs on one $40
Re: TLN-712 Doomsday Machine panels, motm format
2007-07-17 by clickmrmike
Nice layout Steve! $40+ extra for tickmarks, and the panel is already $66. Ow! This kind of thing screams out for a silkscreen (you could have a screen burned
TLN-712 Doomsday Machine panels, motm format
2007-07-16 by sduck409
I ve just posted a bunch of fpd designs for the new Tellun TLN0712 Doomsday Machine. ( http://www.tellun.com/motm/diy/tln712/TLN-712.html ) Four variations of
Re: [ModularSynthPanels] Re: panel update
2007-07-13 by John Mahoney
... Well, the city s name is definitely man-KAY-toe -- I just called the city s information line to hear how they say it! So, since the filter is named for the
Re: [ModularSynthPanels] Re: panel update
2007-07-13 by Scott Stites
Pop quiz, John, has your brain normalized the pronunciation yet?: Man-kay-to or Man-kah-to? =-D Cheers, Scott ... At 10:06 AM 7/13/2007, Doug Wellington wrote: