Modular Synth Panels group photo

Yahoo Groups archive

Modular Synth Panels

Index last updated: 2026-04-13 23:26 UTC

Thread

CGS 02 .fpd out there ?

CGS 02 .fpd out there ?

2007-08-25 by gino wong

I just made up 4 complete Cat Girl wavetable kits with rom, rev1 board
and display adaptor.  One is fully built up onto a plastic temporary
panel and I like it enought to spread three across my systems. I was
considering modding the fourth for the 2732 ROM I have but that may be
unfair to someone who may need it.

I'm doing MOTM format with one row of frac or Euro across the bottom
row (almost sizes up to a Moog P cabinet that way).

Anybody got and .fpd of this wavetable module with the cutout for the
two seven segment displays ?  Actually anything cut out for the seven
segment displays could get me started. If I ever get a pc.

Re: [ModularSynthPanels] CGS 02 .fpd out there ?

2007-08-25 by Scott Deyo

Hi Gino!

I made an FPE panel a few years ago. It works great, though I had to 
file the edges of the rect. cutout a tiny bit. The design is on a PC in 
what used to be my studio. I'll try to get at it and get that file. 
Feel free to keep bugging me about it :)

Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
Show quoted textHide quoted text
On Aug 25, 2007, at 12:25 AM, gino wong wrote:

> I just made up 4 complete Cat Girl wavetable kits with rom, rev1 board
>  and display adaptor. One is fully built up onto a plastic temporary
>  panel and I like it enought to spread three across my systems. I was
>  considering modding the fourth for the 2732 ROM I have but that may be
>  unfair to someone who may need it.
>
>  I'm doing MOTM format with one row of frac or Euro across the bottom
>  row (almost sizes up to a Moog P cabinet that way).
>
>  Anybody got and .fpd of this wavetable module with the cutout for the
>  two seven segment displays ? Actually anything cut out for the seven
>  segment displays could get me started. If I ever get a pc.
>  
>

Re: [ModularSynthPanels] CGS 02 .fpd out there ?

2007-08-25 by Scott Deyo

Gino, what are you using to clock it? Do your VCOs go high enough?

Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
Show quoted textHide quoted text
On Aug 25, 2007, at 12:25 AM, gino wong wrote:

> I just made up 4 complete Cat Girl wavetable kits with rom, rev1 board
>  and display adaptor. One is fully built up onto a plastic temporary
>  panel and I like it enought to spread three across my systems. I was
>  considering modding the fourth for the 2732 ROM I have but that may be
>  unfair to someone who may need it.
>
>  I'm doing MOTM format with one row of frac or Euro across the bottom
>  row (almost sizes up to a Moog P cabinet that way).
>
>  Anybody got and .fpd of this wavetable module with the cutout for the
>  two seven segment displays ? Actually anything cut out for the seven
>  segment displays could get me started. If I ever get a pc.
>  
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.