Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-29 by Scott Deyo
I thought about it when I started Bridechamber, to just send fpd s to my metal guys. But I d still have to lay it out in Illustrator (or similar) for the
Messages
Browse messages
Page 51 of 66 · 3299 messages matched
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-29 by Scott Deyo
I was over at Great River Electronics (Dan helps me w/ PCB stuff), and I can t remember how they do their panels; I ll have to ask again. They are well-nigh
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-29 by Samppa Tolvanen
... http://www.schaeffer-ag.de - the original author of the software, sells .dxf export filter for the product. (In this same group we had discussion about it
Re: [ModularSynthPanels] Re: mankato panel
2007-09-29 by Suit & Tie Guy
... you guys are making me blush here. thanks. ... Suit & Tie Guy suitandtieguy.com stgsoundlabs.com
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-29 by Suit & Tie Guy
... according to the Synthesizers.com technical page, aka the dotcom standards reference manual : Panels are made of .062 aluminum, sanded, formed on the
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-29 by David Griffith
... I wish Paia would so something like that for their panels. The silk-screening is/was so delicate that if you bump it with a fingernail, you ll gougue out
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-29 by John Mahoney
... LOL! I first wrote something like I think that dotcom and MOTM ... , but I deleted the I think part before posting. I was so sure, for a second, there.
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-29 by loopcycle
... Just for the record, Paul S has previously said (about his MOTM panels): The MOTM modules, both Frac and 5U tall, are *not* powder coated ... They are
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-28 by John Mahoney
At 06:11 PM 9/28/2007, Scott Deyo wrote: How hard is it to have a nice textured paint finish (like DotCom, for instance ;) on an engraved panel? That s my
Re: saving money with tickmark discs
2007-09-28 by ~Morbius~
Well... my guess is that the type of paint used is what forms the texture. You may be thinking well yeah... duh?! . In the engraving world (by and large),
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by Richard Brewster
You can download my Matrix Mixer FPD panel here: http://www.pugix.com/middle-cabinet.htm#matrixmixer http://www.pugix.com/files/matrix-mixer.fpd It uses HPGL
Re: [ModularSynthPanels] Re: saving money with tickmark discs
2007-09-28 by Scott Deyo
Hi Morbius, If that s your $.02, I ll throw in a dollar to hear more! It s really good to know the biz side of things, and how other places do it. How hard is
Re: saving money with tickmark discs
2007-09-28 by ~Morbius~
Just as an info kinda thing.... Having been an engraver and working in the sign biz for since the 80 s, I can tell you that reverse-engraving (or front
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by Scott Deyo
That s cool. I didn t know about that. I just saw Dave s CVS module -- crazy! I love it! I can t legally use fpd files, though I think I can view them and go
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by xamboldt
If you use HPGL to make the tick marks, it saves some money. I believe you can find some example fpd files on Dave Brown s site. -Chris
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by loopcycle
Hi David, If you need a one off and youre not willing/able to DIY it, FPE is your best bet. DJB was kind enough to create motm 1u and 2u templates with HPGL
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by David Griffith
... Can you handle .fpd files? -- David Griffith dgriffi@cs.csubak.edu
Re: [ModularSynthPanels] saving money with tickmark discs
2007-09-28 by Scott Deyo
It s only more expensive if you use FPE/ Schaeffer, who engraves and inks each tickmark. For silkscreens, it s no more expensive. That s why Stooge Panels and
saving money with tickmark discs
2007-09-28 by David Griffith
It seems to me that making tickmarks around pots is one of those things that really add to the cost of panels. Suppose you make up a bunch of thin discs with
Re: [ModularSynthPanels] Re: mankato panel
2007-09-26 by John Mahoney
... I agree on all counts, including that I am biased. ... You mean the Imagine Panel . I m eyeing a couple of possible uses for them, myself. -- john -- No
Re: mankato panel
2007-09-26 by gino wong
That STG guy is really good, his attenton to detail is impressive (I am biased , know him and like him), still he does brilliant stuff. His dream panel is
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-25 by contact@bridechamber.com
Nice jam! ... From: david wright To: ModularSynthPanels@yahoogroups.com Sent: Sunday, September 23, 2007 4:03 AM Subject: Re: [ModularSynthPanels]
Re: [ModularSynthPanels] Evenfall VCF, VCOmodules
2007-09-25 by msb
i know little about them, but i own and use one that somebody else built. it is very beautiful. if there is any way to find any more pcbs or built modules,
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-23 by david wright
sounds great scott - man what a giant project - i can see the buttons and cords getting in the way of each other. makes sense. keep me posted! some late night
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-23 by contact@bridechamber.com
my design uses the same PCB spacing, though i put the buttons and led s above the jacks, because that made much more sense to me. so it will save the pot
Evenfall VCF, VCOmodules
2007-09-22 by gino wong
I am building up the last two vco and last state variable filter that I got from Evenfall (MiniModular guy). I am asking for any information about mods,
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-22 by david wright
hey scott - i ll take all those panels once you get them working. i stuffed my prog seq boards but never wired it/powered it up - so i dont know about the aeo
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-22 by Scott Deyo
I ve got some of those panels designed but waiting. I have a weighted random switch/ analog switch matrix panel, and the programmer/ sequencer (just need to
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-22 by david wright
suit & tie guy - yo! the panel looks real good! i wont say i don t know the person, but i know some really sketchy and shady people. i haven t used livejournal
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-22 by John Mahoney
... LOL ... Looks white but it s actually bare aluminum with black markings. Does look cool, but I m a 1/4 guy, myself. (Hey, no wisecracks!) Congrats on the
Re: [ModularSynthPanels] Updates/mankato/threecheersforwhomakesasnvoicepanelnice
2007-09-22 by david wright
On Sep 21, 2007, at 7:20 PM, ... hey sorry list - scott and i write back about each others balls all the time - its nothing weird i
Re: [ModularSynthPanels] Updates
2007-09-22 by contact@bridechamber.com
Sir, Please take this newsgroup seriously, and never, EVER disrespect my balls again. At least not publicly ;p Cheers, and congrats on the bambina! Three
Re: [ModularSynthPanels] Updates; Mankato in non-MOTM format
2007-09-22 by Suit & Tie Guy
On Sep 21, 2007, at 9:20 PM, ... FYI i have a few of the error run frac rack (3FU) Mankato panels (or as i d like to say, the Value
Re: [ModularSynthPanels] New Wave Multiplier PCBs!
2007-09-22 by contact@bridechamber.com
They re from Mouser. I ve been selling a kit of 2 transformers and 4 matched germaniums for $7. (So much work to do on that site!) I ll try to find that part
Re: [ModularSynthPanels] New Wave Multiplier PCBs!
2007-09-21 by John Mahoney
... I have no idea. Ken sells the RRM pre-assembled http://www.cgs.synth.net/modules/cgsrr.html and I don t see where the trafo is specified. You mean, he
Re: [ModularSynthPanels] New Wave Multiplier PCBs!
2007-09-21 by Suit & Tie Guy
... aren t they a standard Mouser part? ... Suit & Tie Guy suitandtieguy.com stgsoundlabs.com
Re: [ModularSynthPanels] New Wave Multiplier PCBs!
2007-09-21 by John Mahoney
... What about the xformers for the real ring mod? -- john -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.488 / Virus
Updates
2007-09-21 by Scott Deyo
Hello group, New panels are being punched right now, including Jurgen s Tau Pipe and Magic Smoke s Mankato Filter. Then it s off to the painters/
Re: [ModularSynthPanels] Digest Number 329
2007-09-06 by Scott Deyo
Hi Gino, The LED is bipolar, sorry, and the hole is .25 . Hope that works for you. You can see a mockup at the top of:
Re: [ModularSynthPanels] Digest Number 329
2007-09-06 by gino wong
Since I can t cook my own panels at the moment, what is implemented on the Tau panels so I know what to build because i am putting them together now. If there
Re: [ModularSynthPanels] Re: new panels on way
2007-09-06 by Scott Deyo
I ve got those in. I think I emailed the group. The problem is, they are made from .09 instead of .125 , so I am selling them for only $20. Scott Deyo The
Re: [ModularSynthPanels] Re: new panels on way
2007-09-06 by William Hall
Hey Scott! We re interested in these- (2) CGS Tube VCA (1) Jurgen s Tau Pipe Phaser Any info on a MOTM 120R, 320R? It seems like stooge panels will be a long
Re: new panels on way
2007-09-06 by clickmrmike
And the TLN-156 is....?
Re: new panels on way
2007-08-30 by wjhall11
Now, now - the Jurgen Tau panel design was a group project. mrmike figured hugely in helping determine what features to include and so did Scott D and Jurgen
Re: [ModularSynthPanels] Re: new panels on way
2007-08-30 by Scott Deyo
That s on my PC at home, unless the ills have it handy; they designed it :) Cheers, Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
Re: new panels on way
2007-08-30 by loopcycle
I m curious to see the panel layout for the tau pipe phaser.
new panels on way
2007-08-30 by Scott Deyo
Hi Group, Thanks for the support on the last run! The new run has the following: MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO Oakley ADSR CGS Tube VCA Jurgen s Tau
DUMB MODULE CONTEST
2007-08-29 by babysealclub
With all this talk of crazy complex modules (design wise) I thought it would be interesting to see what dumb modules you could all think of. So I though I d
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Mark
Thanks, but unfortunately the FPD program is not available for my platform.
Re: [ModularSynthPanels] Digest Number 324
2007-08-25 by Richard Brewster
Just download the FPD file. It s not too hard to make a 1U from this with the FPD program. Download one of my 1U panels if you want to check the exact width