Modular Synth Panels

You can read about my VCO project here.

http://www.pugix.com/cgs-vco.htm

You should think about panel features you want for your CGS VCO.  There 
many options to consider, and it's no problem filling up a 2U panel with 
CGS VCO features.  Look around the files section for ideas.  Mine has 
only the features I wanted.  Some minor issues with my 1U CGS VCO 
panel:  1) It uses 0.4 mm engravings -- I recommend using 0.2 mm now, 
for reasons that have been discussed on this list.  2) It uses my 
original tic mark style, which is more costly than HPGL tic marks.  I'd 
like to point out that you can easily fit two toggle switches in the 
space above the jacks and below the pots on a standard MOTM 3-pot, 
6-jack layout.  The switches are 0.7 inches above the jacks.

(If anybody would like one of my older FPE designs like the CGS VCO, but 
with HPGL tic marks and 0.2 mm engraving, I'll be happy to make one for 
you.)

I always start a new FPE panel by taking some other one to use as a 
template and SAVE AS the new file.  My 2U Dual CGS VCA panel can be used 
as a template, if you like:

http://www.pugix.com/bottom-cabinet-lower.htm#tubevca

Click on the Custom Front Panel Express panel link to download the FPD file.

-Richard Brewster

Jason Proctor wrote:
> yes, despite promises the Mac version of the FPE designer app is not 
> yet available.
>
> if you have an Intel Mac, you could run it with Parallels or Boot 
> Camp, like i do. if you need screenshots of any of the FPD files in 
> the files section, let me know and i'll send them over.
>
> alternatively, here's a picture of Richard Brewster's CGS VCO panel, 
> complete with accompanying FPD file.
>
> http://pugix.com/middle-cabinet.htm#cgsvco
>
> (although admittedly he didn't implement all the features of the VCO)
>
>
>   
>> Hi guys and girls, I just joined this site because I heard it was 
>> possible to get panel
>> designs. I looked through the files section and there sure are a 
>> good number, pretty
>> impressive. I'm looking for one for one of Ken Stone's modules, the 
>> VCO version 0.4.
>> There seems to be one in the CGS section but I couldn't open it(at 
>> least I think that's what
>> it was). Would anybody happen to have that particular module in a 
>> PDF file or something I
>> could open easily? (I'm using a Mac)
>> thanks a lot,
>> steve
>>     
>
>
>
>  
> Yahoo! Groups Links
>
>
>
>
>