Modular Synth Panels

I believe the PKES70 knobs would fit on my 3U panel, but there 
wouldn't be enough finger space to actually grab onto a knob and turn 
it (not comfortably, anyway). I don't have any PKES70 knobs to test 
with, I'm just eyeballing it with a ruler.

>I was thinking of a 4U Doomsday Machine panel, using the PKES70 knobs
>instead of the PKES60.  The PKES70 are about 3/4 inch in diameter and a good
>compromise between the PKES60 and PKES90.  First I need to check on whether
>Scott's 3U panel would fit the larger knobs.
>
>John Loffink
>The Microtonal Synthesis Web Site
>http://www.microtonal-synthesis.com
>The Wavemakers Synthesizer Web Site
>http://www.wavemakers-synth.com
>
>
>>  -----Original Message-----
>>  From: ModularSynthPanels@yahoogroups.com
>>  [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Doug Wellington
>>  Sent: Monday, July 16, 2007 10:43 PM
>>  To: ModularSynthPanels@yahoogroups.com
>>  Subject: Re: [ModularSynthPanels] Re: TLN-712 Doomsday Machine panels,
>>  motm format
>>
>>  > $40+ extra for tickmarks, and the panel is already $66. Ow!
>>
>>  I'll make you a panel for only $64.95...what a bargain!  ;-)
>>
>>  > (you could have a screen burned for about $40)
>>
>>  Actually, I went to a larger screen and I'm averaging a half dozen
>>  designs on one $40 screen, so setup costs aren't too bad - that's why
>>  I don't charge setup fees for new designs - I figure it's just the
>>  cost of doing business.  I wait until I have enough designs to fill a
>>  screen, but what with all the Tellun designs and the Thomas Henry
>>  stuff going on, I'll probably make two, maybe three new screens in the
>>  next week or two.  It takes me longer to set up the jig to align
>>  everything than it does to make the screen itself...
>>
>>  Of course, for something big like the Milton, P3, Midibox SEQ, or
>>  MB808, I sometimes end up using one screen for each design.  And the
>>  MB808 has five colors, so there are multiple screens...
>>
>>  --
>>  -Doug
>  >
>