Re: [ModularSynthPanels] FPD template for Eurorack blank panels?
2017-08-13 by Samppa Tolvanen
I think Euro format is something that You can get from any manufacturers site as .DXF. It s sort of funny, that telco rack format ain t based on ISO
Messages
Browse messages
Page 1 of 66 · 3299 messages matched
Re: [ModularSynthPanels] Re: FPD template for Eurorack blank panels?
2017-06-04 by Richard Brewster
Hi John! This looks like a good starting point. If you wonder what it s for, I plan to get Paul Schreiber s eurorack power supply (Big Stinker), when he
Re: FPD template for Eurorack blank panels?
2017-06-04 by Drummer@...
Hi Richard! I just uploaded one called JLR_MS2000R_Eurorack_Interface_4_PowderCoat.fpd Give it a try.
New file uploaded to ModularSynthPanels
2017-06-04 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
FPD template for Eurorack blank panels?
2017-06-04 by Richard Brewster
Has anyone made blank FPD panels in Euro format? I need a template for a 4hp blank, that has the rail hole positions included. Thanks, Richard Brewster
New file uploaded to ModularSynthPanels
2017-05-17 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2017-05-17 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
For Sale FRAC Panels with Attached Electronics!!
2017-01-20 by brianfolkes@...
I m condensing all my modules and have the following for sale: ALL MODULES ARE FACTORY ASSEMBLED BLACET: VCO (v1) $240 VCO (v2) $240 W/COOL PROTOTYPE FACE
New file uploaded to ModularSynthPanels
2015-09-15 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2015-09-02 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2015-09-02 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Modcan A fpd template
2015-06-07 by domsaddress@...
Anyone got one of these? Or any kind of Modcan A fpd that I can tweak to what I need?
Re: [ModularSynthPanels] Power supplies
2015-01-11 by brianfolkes@...
There s a NOS unit on eBay for $50! Brian
RE: [ModularSynthPanels] Power supplies
2015-01-10 by John L Rice
Well, it may be an incorrect or outdated link but you can always do your own search on Mouser, Digikey, Allied, etc and find an in stock supply that will work
Re: [ModularSynthPanels] Power supplies
2015-01-10 by waveguide
The minimum quantity of 35 power supplies is a show stopper from your mouser link.
Re: Power supplies
2015-01-09 by Marvin Jones
SLPower (formerly Condor) is also a reputible manufacturer, and makes linear power supplies that are both spec- and Form-Factor-compatible to the Power One
Re-enforcing thin panels.
2015-01-09 by Jim Blair
Hello! Some of the panels on my DIY modular are flexing a bit more than I d like. I have some ideas for re-enforcing the backs (using 1/4 aluminum L-channel,
Re: [ModularSynthPanels] Power supplies
2015-01-09 by Pascal Barat
Hello, I bought this one from Mouser : 784-HAA15-0.8-AG which is the legacy Power-One. It is now referenced at Mouser as a Bel Power Solution manufacturer but
Re: [ModularSynthPanels] Power supplies
2015-01-08 by O.Z. Hall
I recently bought one of these: https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=221720 It s
RE: [ModularSynthPanels] Power supplies
2015-01-08 by John L Rice
Hi, Bel Power Solutions bought Power-One so, search for them instead. I think they are keeping the same model numbers. They have a nice product selector here:
Power supplies
2015-01-08 by gino wong
What are we doinmg for Power supplies these days ? Can find power ones. -- *Gino Wong Birgelo *BSComm, BSEE, PhP ReRed Recording Girard Hall Studios (ReRed
Re: [ModularSynthPanels] Re: Hello
2014-11-21 by Pascal Barat
Hello Drummer, Thx for your reply but the Conversations link is greyed and inactive. De : Drummer@ImJohn.com [ModularSynthPanels]
Re: Hello
2014-11-21 by Drummer@...
Hi Pascal Barat, Near the top of the Yahoo groups page in your browser click the Conversations link near the top of the page to see all the threads. Once in
Hello
2014-11-21 by Pascal Barat
Hello Guys, I¹m happy to join you but now, how to see your messages ? Do I have to connect or something else ? BTW, I¹m working on the Moog Fixed Filter 914
Re: [ModularSynthPanels] MU / DOTCOM fpd templates?
2014-06-28 by O.Z. Hall
J, I m a bit of a newbie to this group. I think I asked the same question about 6 months ago. Easiest thing to do is get a panel blank from DOTCOM and do an
MU / DOTCOM fpd templates?
2014-06-19 by salsole@...
Forgive me, I am new here... I am looking for a front panel designer template for both 1 space and 2 space MU format panels. I have a couple CGS boards I have
Re: ODP: [ModularSynthPanels] cutting "trough"s in a blank panel for fad
2014-04-19 by O.Z. Hall
Gino, First, can you point me to some of the generic panels? Here s a video explaining my project. I m using a behringer controller for the knobs at this
Re: ODP: [ModularSynthPanels] cutting "trough"s in a blank panel for fad
2014-04-19 by gino wong
This looks like an opportunity to consider some of the Livid DIY Builder boards and panels.. It also sounds like a good generic panel idea. -- *Gino Wong
Re: ODP: [ModularSynthPanels] cutting "trough"s in a blank panel for faders and displays
2014-04-19 by o.z. hall
Roman. I ll see if I can produce a gerber. I usually use front panel express. I don t know if it produces gerbers. I also use eagle which does produce
RE: [ModularSynthPanels] cutting "trough"s in a blank panel for faders and displays
2014-04-19 by o.z. hall
Yes I do live in a largest city . That s a great idea. I ll check into it. Great idea!
ODP: [ModularSynthPanels] cutting "trough"s in a blank panel for faders and displays
2014-04-19 by Roman Sowa
Do you have a drawing for this with dimensions? Or better yet - Gerber file? I might do that for you for the cost of shipping. Blanks fly easily in envelopes,
RE: [ModularSynthPanels] cutting "trough"s in a blank panel for faders and displays
2014-04-19 by Dave Halliday
Are you located near a largish city (over 100,000 people)? There might be a vocational college with a machining program. The teachers are always looking for
Re: [ModularSynthPanels] Re: cutting "trough"s in a blank panel for faders and displays
2014-04-19 by o.z. hall
Time to send this panel to the pros :). I d rather spend my time on unique circuitry or software! Thx for walking me thru this Julian!
Re: cutting "trough"s in a blank panel for faders and displays
2014-04-18 by <port23.co.uk@...>
Its not easy to DIY, but its possible. Of course, if you have a mill... but im assuming you dont, so - Print out the design on paper, to scale. Choose a drill
cutting "trough"s in a blank panel for faders and displays
2014-04-18 by <o.z.hall@...>
I have an 8x8 LED matrix display that I want to put on an MU (or MOTM) panel. I m planning to prototype this with a blank panel and a printed/laminated
Re: Fwd: [sdiy] SDIY wiki
2014-04-18 by gino wong
I think the more open the better, better a few kids and know it alls that can be talked to than snobs who are just another engineer in the world and a puffed
Re: Fwd: [sdiy] SDIY wiki
2014-04-17 by <roglok@...>
i second that. muff s DIY section is one of the friendliest and most helpful places on the web. while not everybody there (including myself) is an expert, i ve
Re: Fwd: [sdiy] SDIY wiki
2014-04-17 by <seandynan@...>
Dave, that has not been my experience on muffwiggler s DIY forum at all. Unless you are talking about the correct way to power a Euro rack in which case
Re: [ModularSynthPanels] Fwd: [sdiy] SDIY wiki
2014-04-17 by <dwv1957@...>
The problem with Muff Wiggler is the proliferation of trolls on that site, also double check any answers you get from them, there are a lot of people who
good vendor
2014-04-15 by gino wong
Sorry for cross posting but it is time we started checking on ourselves again Haven t done this in a long time but it is time we started keeping watch again.
Re: [ModularSynthPanels] RE: Greetings!
2014-03-26 by o.z. hall
Cool. I have done the laminate route myself a time or two. Surprising how good it looks. How do u anodize? I guess I should google it. I did not know it
Re: [ModularSynthPanels] RE: Greetings!
2014-03-25 by <steve@...>
Hi there Oz, Will give an update once I get there! Just on the wiring now so should be done in the next couple of weeks. Definately some time invested in
Re: [ModularSynthPanels] RE: Greetings!
2014-03-23 by O.Z. Hall
Steve, I m in the yahoo group. I m interested in how you like the Klee sequencer. Once you get finished with it, please drop me a line and tell me how much
RE: Greetings!
2014-03-23 by <steve@...>
Hi Bruno, Slowly building up synth mostly oakley with a few others. Currently working on the Klee. Over on Muffs as mumblinstevedubya. Would be cool to meet up
RE: switchable Arp filter mods
2014-01-10 by <makeme1witheverything@...>
Is this something that others have done? It seems like something that wouldn t be so easy to do with just one switch. Sure, you could switch the ins and outs
Re: [ModularSynthPanels] switchable Arp filter mods
2014-01-09 by Robert Smith
If you can wait a few months, i will have a very tiny ladder filter pcb fully populated with SMD components for sale. I have a source for matched transistors
Re: switchable Arp filter mods
2014-01-09 by o.z.hall@att.net
Forgive my restatement of the obvious, but I would buy the MOTM ladder board + components ($100 w/Shipping). Should not take long to assemble. Alternately,
switchable Arp filter mods
2014-01-09 by gino wong
I want to add a ladder filter to my Arp Oddy on a single switch.. There is a DIY board layout on the web. Anybody have any off the shelf suggestion or
Bunch of panels and pcb's for sale
2013-12-04 by <allanjhall@...>
Hello all! I m having a clearout of 5U Bridechamber panels and pcb s, won t have time to build them any time soon so selling them. Put them up on ebay uk
RE: Greetings!
2013-10-14 by <moondog1311@...>
Hi Steve, How did you get on with your Oakley? Any luck sourcing some good panels? Would be interesting to hear your feedback - I m based in Chichester, W.