Yahoo Groups archive
Archive for ModularSynthPanels.
Messages
Page 66 of 66 · 3299 messages matched
2002-10-24 by Scott Deyo
I m not 100% sure. It should be the same as Oakley, I guess. But does anyone have an MOTM multiple? It seems to me that those jacks must have a larger vertical
2002-10-23 by djbrow54
... What are the typical horizontal and vertical spacings for the jacks? I might want to tweak it a bit. Dave
2002-10-23 by tsomneevich
Dave, It looks good. The jacks are a little farther apart horizontally, and closer vertically, than MOTM, but it should work just fine. I only state the
2002-10-23 by djbrow54
I m currently waiting for my MOTM modules to arrive. I need to build an interface for my Arp 3604 CV keyboard and designed and uploaded a 2 wide MOTM style
2002-10-23 by Scott Deyo
Just to keep things all nice and tidy, you can email me your orders, and I ll update the list. If you want an alternate of the same design, it will be on its
2002-10-23 by Richard Brewster
I m doing another panel design for the Blacet EG-1 VC Event Generator. It will be different from the design by Jeffrey Pontius. I will have this ready in a
2002-10-22 by Jeffrey Pontius
... Having motm, Stooge and Schaeffer panels, maybe I can offer the essential differences, and others can add/correct me. Schaeffer panels compared to
2002-10-22 by robert taylor
Does anyone know how these panels compare to Stooge panels? Does the finish match MOTM panels? Has anyone tried silk screening MOTM blanks? robert
2002-10-22 by Jeffrey Pontius
... I have several 1U cgs designs undergoing preparation, and I am going to switch to the .2mm as an experiment. John, thanks for mentioning the photos -
2002-10-22 by tsomneevich
Hello, I added a database for the panel order that lists the modules and how many are currently going to be ordered. I added the new CGS Steiner- Parker VCF,
2002-10-22 by tsomneevich
Yes, very nice to be able to compare. Thanks! Anyone care if we switch to .2mm? Scott ... you can ... The EFG
2002-10-22 by Charles Stella
Wow cool! If you look at the photo in the upper right hand corner you can see the Oakley EFG on the left and the Oakley Phaser on the right. The EFG is .4mm
2002-10-22 by John Loffink
There are closeup photos of these panels here: http://www.retrosynth.com/slideshow/baah02/ John Loffink jloffink@austin.rr.com ... concur
2002-10-22 by Jeffrey Pontius
... Well, I m interested enough that I will modify a few cgs panels that I am now working on to text of .2mm, and then compare when I receive the panels.
2002-10-22 by Scott Evans, Gen Mgr
Hello, I just saw both examples on Charles MOTM last Saturday and would concur with his assessment that the .2mm is easier to read. My .02 Scott
2002-10-22 by tsomneevich
I also have some available CGS panels from the last run if anyone s interested: 2 2u v8 sim/ digital noise -- haven t finished mine yet $25 3u sub-oscillator
2002-10-22 by tsomneevich
Hi Charles, I d be willing to try .2mm. Sometimes I think the .4mm looks a bit... clunky. As long as it s legible, it s good by me :) I used Arch font for a
2002-10-22 by Charles Stella
Thanks for the welcome. Yes, I am referring to the text height. All text sizes for that matter. I have always used DIN 1451 for text except for some logos
2002-10-22 by Jeffrey Pontius
Welcome Charles, ... I never experimented much with the text, so this is interesting. By text in the 2.5 to 4mm range are you referring to the Text height
2002-10-22 by cstella4
Hello Group! I am glad this is now available as I have been using Schaeffer panels for awhile now, love the quality but the shipping is pricey. I plan to jump
2002-10-22 by tsomneevich
Hi Group, Ten days til the order! All the files are up in the files section, so anyone interested in these panels, please let me know soon. Any posted file is
2002-10-19 by latex bass
I had the same problem with my CGS Gated Comparator. I went to the local Home Depot and just kinda looked around and I found some aluminum L shaped rails, the
2002-10-19 by Jeffrey Pontius
If this is OT, please let me know. I m curious as to how you guys (generic) mount your pcb s to the Schaeffer panels. When I have 2 or more pots, I use
2002-10-19 by Scott Deyo
In the past, I ve ordered panels on two occasions and sent them to three other people on this list. It s not that much extra work -- priority mail boxes and
2002-10-19 by Scott Deyo
... I m definitely on the saving-money tip, which is the main reason I don t use tick marks. ... Last time I ordered around 30 panels, and only received
2002-10-19 by Scott Deyo
... Sometimes too tight. I had to drill out the jack holes on my last MOTM module. I think my designs use 9.5mm holes for the jacks. Whatever the sizes, they
2002-10-19 by Richard Brewster
... possibly ... Ah. This is really important to find out. I was assuming the discounts applied only to multiples of the same .fpd file. If it is just a
2002-10-19 by Jeffrey Pontius
Hi panel designers and users, Just thought I would add $.02 to several mentioned issues. Sorry if this turns into a novella. I suppose the basic (conflicting)
2002-10-19 by Richard Brewster
Since we started the standards, topic, how about hole sizes? On my custom panels I used 3/8 (0.3750) inch holes for both the jacks and the pots, and 1/4 inch
2002-10-19 by Richard Brewster
If you scrutinize the tick marks on MOTM modules, you will see at least three different styles, the main difference being the length and thickness of the
2002-10-19 by Scott Deyo
Standardization is an issue, since we save money if we get 5 or more of any design. I m already spending more money than I make, so I don t go for tick marks.
2002-10-18 by Richard Brewster
Greeting fellow MOTM-Schaeffer ers. I am really into panel design and glad to share anything I design. I m also glad to talk about the module design issues
2002-10-18 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Richard
2002-10-18 by motmpanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the motmpanels group. File : /Richard
2002-10-18 by tsomneevich
... Basically, for the extra cost, I like the eye-function and the ... They do look nice. I use panels of all different colors, so continuity isn t a factor
2002-10-18 by Jeffrey Pontius
Scott, ... Ok, good idea. I hadn t thought of pulling the macros off the entire design. Basically, for the extra cost, I like the eye-function and the looks
2002-10-18 by tsomneevich
I like those designs. I copied the macros from the files. Do I see a tick mark/ no tick mark debate on the horizon? :) Glad to see the EFM designs, too! Scott
2002-10-17 by tsomneevich
hello! i m going to order from schaeffer soon. the list of panels that are most likely going on this run so far: CGS: 5 gate sequencer (5u, green) master div
2002-10-17 by Jeffrey Pontius
If interested, I uploaded a number of panel designs for panels that I have put into service (except cgs wave multipler, which should be working this weekend):
2002-10-16 by jpontmotm
... Sorry, it is a 5U panel, not 6U (going for more coffee). Jeff
2002-10-16 by Jeffrey Pontius
... Ok, by semi-popular demand I ve uploaded my 6U, 19 rack mount panel design for one SEM1A to the files section of the motmpanel group. Some notes (if you
2002-10-16 by l8xbass
I would love to see that SEM panel design that jpontmotm mentioned in his post...
2002-10-16 by l8xbass
I would love to see that SEM panel design that jpontmotm mentioned in his post...
2002-10-12 by tsomneevich
One reason I started this list is as a place to post designs for a number of different pcb-makers or whatever. So feel free to put them in the files section.
2002-10-12 by l8xbass
Sorry about the Farilight crack... I would love to see what you have for the Oberheim SEM patch panel... I have been wanting to patch out my SEM s for quite
2002-10-12 by l8xbass
Sorry about the Farilight crack... I would love to see what you have for the Oberheim SEM patch panel... I have been wanting to patch out my SEM s for quite
2002-10-12 by Jeffrey Pontius
Well, I don t have a Schaeffer panel design for a Fairlight, but I have several others in (basically) motm style for modules from CGS (Ken Stone), EFM, Oakley,
2002-10-10 by l8xbass
I say we start out with a MOTM panel for the Frairlight CMI... and if you believe that...
1970-01-02 by Gino Wong
I am building a a pair of Polyfusion AS 1 sequencers in rack form. I have boards. I bought 2 panels from Lou Newman but I never got them. Anybody into joining