Re: Chinese floppy emulator
2014-08-19 by xeelox@...
Save your money boys and girls. RaizinMonster is not compatible w/ Emax 1 as confirmed to me by the manufacturer last night. Emax II users would likely have
Messages
Browse messages
Page 21 of 236 · 11758 messages matched
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by JAMIE logan
thats the same 512kx8 flash chip used on the 7720uw the chip used is the arc760-B which is still a chip that acard still make i noticed he has removed the
Re: Chinese floppy emulator
2014-08-18 by xeelox@...
I thought about getting one to test, but they were already sold out when I emailed them on July 1st. Here s their reply: I am sorry that now CF RaizinMonster
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by JAMIE logan
may is new its a new product its not been around long your just splitting hairs but by all means try it if you want thats what i have had to do in the past for
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by Mitch Bryson
It;s not that new. RaizinMonster has been around since May or something. On Monday, 18 August 2014, 17:25, JAMIE logan jammie.emma@blueyonder.co.uk [emax]
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by JAMIE logan
if it is based on the same 7720uw design as the aztec it wont work with the emax 1 but for emax2 users its a good buy as it is the cheapest option to add with
Re: Chinese floppy emulator
2014-08-18 by xeelox@...
I m inclined to agree w/ Jamie for the exact reasons mentioned, but I have emailed the manufacturer to see if he has any reason to believe it will behave
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by JAMIE logan
its a new product its only been out a few weeks try if you like but it is based on the same tech as the aztec monster On 18 August 2014 06:21, bmacdoug1 .
Re: [emax] Re: Chinese floppy emulator
2014-08-18 by bmacdoug1 .
Has anybody tried this with the Emax? Product Name : CF Raizin Monster HOT SWAP corresponding CF-SCSI conversion adapter Price : 12,900 yen (converts to
Re: [emax] Re: Emax II Key response delay issue
2014-08-15 by JAMIE logan
the keys its one spring it connects to the key and there are 2 contact bars you need to remove the key to get at them On 15 August 2014 01:58, Steve Limbrick
Re: Emax II Key response delay issue
2014-08-15 by Steve Limbrick
Thanks for that, I haven t noticed these other 2 springs before - where are they located? I m assuming as I haven t seen them when cleaning the obvious springs
Re: [emax] Re: Chinese floppy emulator
2014-08-14 by JAMIE logan
as for the dss1 upgrade yes it is great but we had the os code for that so that it was possible to add the usb and extra bank switching for the memory and
Re: [emax] Re: Chinese floppy emulator
2014-08-14 by JAMIE logan
its because his design based on the 7720uw from acard he uses the same chips and the same bios and i know he gets disk errors as i just cant get the 7720uw to
Re: [emax] Re: Chinese floppy emulator
2014-08-14 by bmacdoug1 .
OK thanks for the heads up. I wish i knew how to program low level machine code and make a scsi/usb interface that had firmware allowing it to work with
Re: Chinese floppy emulator
2014-08-14 by xeelox@...
I ve spoken with the manufacturer of the AztecMonster and he confirmed it does NOT work with Emax I. He says it will only work w/ Emax II & III. Unless the
Re: [emax] Re: Chinese floppy emulator
2014-08-14 by djrgary@...
The CF Aztec device works well on EmaxII as long as you don t let it verify after formatting. Have not got it to work with Emax I. Believe there is a firmware
Re: [emax] Re: Chinese floppy emulator
2014-08-13 by bmacdoug1 .
Regarding the CF Aztec device, i will order one and give it a try in my Emax. Will report back to the group if it works.....if not i will use it to replace the
Re: [emax] Re: Chinese floppy emulator
2014-08-13 by JAMIE logan
take the plunge and try it thats the only way your going to find out but just because it works in a mac se 30 does not mean it will work in an emax take the
Re: [emax] Re: Chinese floppy emulator
2014-08-13 by Ted Summers
Are you saying you tried it in the Mac SE/30, and it worked, but it did not work in the Emax? If so, then I would suspect a difference in the SCSI
Writing a FAQ
2014-08-13 by Ted Summers
As it seems like we keep getting a lot of the same questions I am working on a FAQ. It s unfortunate it can t just be on Yahoo Groups itself, but it doesn t
Re: [emax] Re: Chinese floppy emulator
2014-08-13 by bmacdoug1 .
It s too bad it doesn t work, because i use it with my 720kb Akai MPC60 perfectly. Works great with this application, even has internal memory that holds your
Re: [emax] Re: Chinese floppy emulator
2014-08-13 by JAMIE logan
no it does not work even in dos based machines it can be a right pain to get working there is jumpers for ds1 ds0 there are jumpers for ready and other signals
Re: Chinese floppy emulator
2014-08-13 by cheju_99@...
Ok, thanks for the support!!.. I supposed it will not work.... Ricardo
Re: [emax] Chinese floppy emulator
2014-08-13 by Ted Summers
My understanding is that these don t support other than DOS images. To clarify- the manufacturer GOTEK supports FAT12, FAT16, FAT32 Image size 1.44 MB. Emax
Re: [emax] Chinese floppy emulator
2014-08-13 by Robert Van Kuran
Get an HxC much more support for images. -RVK
Chinese floppy emulator
2014-08-13 by cheju_99@...
Anybody have tried to put a cheap chinese floppy usb emulator onto an emax 1 ???? disk brake Picture - More Detailed Picture about 1Pcs NEW Floppy Disk Drive
Re: Anybody tried the Adtron PCMCIA Card readers? SCSI or IDE?
2014-08-11 by xeelox@...
Thanks for the link Jamie. I ve seen that site and yes their products are very expensive. Besides, I don t see any of the older Adtron devices I was
Re: [emax] Anybody tried the Adtron PCMCIA Card readers? SCSI or IDE?
2014-08-11 by JAMIE logan
http://www.reactivedata.com/Products/Smart_Modular_Adtron_Industrial/index.php smart is the company who acquired adtron in 2008 they still sell the devices and
Re: [emax] Anybody tried the Adtron PCMCIA Card readers? SCSI or IDE?
2014-08-11 by xeelox@...
Can t ask Adtron. Out of business. That s why I asked the forum and posted links from internet archive where you could at lease look at specs/datasheets.
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-11 by JAMIE logan
no because i dont have the copywrite to do it i was given it by the person who did have the copywrite who used to be a member on here and used to run emulator
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-11 by Robert Van Kuran
Can you please upload the Full Service Manual to the files section? Thanks, -RVK
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-11 by JAMIE logan
the one that rob gave me and ted is the full one it has all pages on it On 11 August 2014 00:27, Ted Summers djtbs1@gmail.com [emax]
Re: [emax] Anybody tried the Adtron PCMCIA Card readers? SCSI or IDE?
2014-08-11 by JAMIE logan
i have used adtron and have one of the scsi to ide drives whether they work in the emax i dont know as i never tried they provide for the military and they are
Anybody tried the Adtron PCMCIA Card readers? SCSI or IDE?
2014-08-11 by xeelox@...
I see these pop up on occasion and am curious if anyone has tried or heard of others using these as HD replacements. I see nothing in the database and no
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by Ted Summers
I believe these missing pages were where a power supply schematic would have gone. But since they used a 3rd party for the power supplies, it is omitted. I
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by Robert Van Kuran
Did you notice if you have all of the pages in the pdf? I notice pages missing in the middle of the pdf I found online. I posted it here too but it has missing
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by Ted Summers
Mine is PDF. I have no idea of MusicParts.com has a different one (not missing pages) or hard copy. You would have to inquire. -T On Aug 10, 2014, at 9:03 AM,
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by Robert Van Kuran
Hey Ted, Is your Service manual a hard copy? Does it have all of the pages? The pdf I ve found floating around the web is missing pages... The site you listed
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by Ted Summers
I have the standard Emax service manual. (available from musicparts.com I believe. I got it from Rob of Emulator Archive, as he has right to copy). Both Emax 1
Re: [emax] Re: Emax II Key response delay issue
2014-08-10 by djrgary@...
There are also contact springs (2 for each key, 1 for key released, other for key pressed) that you may want to check for cleanliness. They use this setup to
Re: [emax] Re: Transform Multiplication Not Working
2014-08-10 by djrgary@...
I had wondered if when a person installs SE if the install writes the data back to a compatible os disk in certain tracks the emax is able to load from. If so
Re: [emax] Emax SE Monophonic
2014-08-10 by djrgary@...
It is monophonic, however it has capacities of effects processing in stereo. If you are seeking monophonic output then connect to the right output as it is
Re: [emax] Re: PCD-60B compatibility questions with Emax 1
2014-08-10 by djrgary@...
Ted, do you have any scsi interface schematics for Emax 1 and Emax II? Sent from Yahoo Mail on Android
Re: [emax] Re: Anyone familiar with these SCSI to CF devices?
2014-08-10 by djrgary@...
Is this for an Emax 1 or 2? Sent from Yahoo Mail on Android
Re: [emax] Re: Transform Multiplication Not Working
2014-08-08 by JAMIE logan
for that its easier to layer them On 8 August 2014 17:34, bry_204@yahoo.com [emax]
Re: [emax] Re: Transform Multiplication Not Working
2014-08-08 by bry_204@...
I ll have to check it out later. Honestly not sure how much more time I can put into trying to get this to work. From the sounds of it, it s a hit and miss for
Re: [emax] Re: Transform Multiplication Not Working
2014-08-08 by JAMIE logan
cant help there i use winxp which it works perfectly fine in can you make a dual partition so you have xp as well also what rev version of emxp are you using
Re: Transform Multiplication Not Working
2014-08-08 by bry_204@...
Yeah, I have both the driver and the controller installed. It s Windows 7.
Re: [emax] Re: Transform Multiplication Not Working
2014-08-08 by JAMIE logan
what are you formatting it to in omniflop
Re: [emax] Re: Transform Multiplication Not Working
2014-08-08 by JAMIE logan
also you cant format it in omniflop it usually has to be formated first in a emax before omniflop will tell you what it is have yo corre4ctly installed the