Yahoo Groups archive

Emax

Index last updated: 2026-04-28 23:23 UTC

Messages

Browse messages

Page 20 of 236 · 11758 messages matched

Re: [emax] Emax Rack fitting display

2014-09-24 by Scott Stanley

Is this a drop in replacement? I d like to replace the display in my Emax II and Emulator II. Regards, -s* On Wed, Sep 24, 2014 at 12:56 PM, bmacdoug1 .

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-24 by Ted Summers

I agree after looking at the labels on the drives, the Zip doesn t use 12V at all. only +5. -T On Sep 23, 2014, at 11:30 PM, Niklas Ehrlin

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-24 by Ted Summers

I just use standard power adapters with all wires (no modifications). -T On Sep 23, 2014, at 11:30 PM, Niklas Ehrlin niklas.ehrlin@gmail.com [emax] wrote: Ok,

Thread view Attachments: 0

Re: [emax] Emax Rack fitting display

2014-09-24 by bmacdoug1 .

This is what you need: http://www.tme.eu/en/details/rec001602cwpp5n0/alphanumeric-oled-displays/raystar-optronics/rec001602cwpp5n00000/ RAYSTAR OPTRONICS

Thread view Attachments: 0

Emax Rack fitting display

2014-09-24 by andre@...

I finally have an Emax rack and would like to change the display as the backlight is dim. The most important thing is that this fits in the rack casing without

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-24 by Niklas Ehrlin

Ok, thanks I will contact him. But I have to ask, when you have installed internal ZIP-drive (as I imagine that you have, since youve made a bootable Zip)

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-23 by Ted Summers

If you are on the drop box hosted by Andre, there are the 5 working factory HD images up there, which I have already tested as bootable on flash media, Zip,

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-23 by Niklas Ehrlin

Ok, i ll try to use the 12V line as well. i was just afraid to fry the drive, since it only stated 5V on the drive itself. Robert: Did you make a bootable

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-23 by Ted Summers

I would have thought the 12V line would have been used for the motor on the zip. However, if the motor is spinning and the light comes on the drive, then

Thread view Attachments: 0

Re: [emax] Re: SCSI ZIP

2014-09-23 by Robert Van Kuran

Use EMXP to load a zip disk image with banks to the zip disk. Then try again. Worked for me. -RVK

Thread view Attachments: 0

Re: SCSI ZIP

2014-09-23 by niklas.ehrlin@...

Ok, I ll have to continue ask on this topic: I switched the faulty internal HDD to an internal Iomega Z100Si (SCSI ZIp) and used the same SCSI cable that

Thread view Attachments: 0

Re: Sampler choices...

2014-09-17 by submaskdevice@...

IMHO I think the Emax SE ,Nord Lead,Akai S1100 and Ensoniq EPS 16+. I hope that helps?

Thread view Attachments: 0

Re: [emax] New Emax owner needs advice

2014-09-16 by duncanmalashock@...

Thanks for your advice! Brandt has let me know about a solution involving a CompactFlash card reader, a slim floppy drive and a modified adapter, which seems

Thread view Attachments: 0

Re: [emax] Sampler choices...

2014-09-16 by Mitch Bryson

I d keep the S950 ,Emax ,Nord lead for sure. Would ditch the Mirage and I m not sure what I d keep between the S1100 and EPS16. On Tuesday, 16 September 2014,

Thread view Attachments: 0

Sampler choices...

2014-09-16 by johnny@...

Hello everyone, I ve recently rewired my studio, and have paired down a bit. I only have room for 4 of the 6 rack pieces I ve had flanking my desk in the past

Thread view Attachments: 0

Re: SCSI ZIP

2014-09-16 by niklas.ehrlin@...

Found an old post: Format the Zip-disks in an Win XP PC with zip-drive and EMXP. That makes sense. Niklas

Thread view Attachments: 0

SCSI ZIP

2014-09-16 by niklas.ehrlin@...

Hi If the Emax 1 OS cant handle filesystems bigger than 20 MB, is it even possible to format a Zip disk of 100 MB? I planning on revoving the faulty HDD in my

Thread view Attachments: 0

Re: [emax] Emax PSU missing parts

2014-09-14 by Krikor

Oooopps sorry just wanted to ask again about my message, if someone has the same PSU and is willing to take a good picture of it that d really help Best K

Thread view Attachments: 0

Re: [emax] Emax PSU missing parts

2014-09-14 by Krikor

http://www.krikor.fr +33632199413 Booking dj & live: cedric@referenceprods.fr ... http://www.krikor.fr +33632199413 Booking dj & live: cedric@referenceprods.fr

Thread view Attachments: 0

Emax PSU missing parts

2014-09-12 by Krikor

Hello, I have a spare PSU for my emax, but it is missing parts on it, it is not an original one but a more modern by SKYNET. Here is a picture link with the

Thread view Attachments: 0

Re: [emax] New Emax owner needs advice

2014-09-12 by Matt

Got scsi? If so zip disk or extra drive or card reader is the cheapest way to go. Also Jammie has a combo scsi card reader / floppy combo coming out soon if I

Thread view Attachments: 0

Re: [emax] New Emax owner needs advice

2014-09-12 by Niklas Ehrlin

Hi Congratulations on your EMAX! I myself have worked on getting a new drive option for my broken HDD, by trying to update to a more modern option, but so far

Thread view Attachments: 0

New Emax owner needs advice

2014-09-12 by duncanmalashock@...

Hi all, thanks for having me. I just bought an Emax on eBay (a model 2213), which I expected to come with a hard drive with a lot of old preset samples from

Thread view Attachments: 0

Re: [emax] PSU missing parts

2014-09-11 by JAMIE logan

r1 is a 70sp VEI005 the cap is a phillips poly type 0.1/250v the coil is r6-103 u1f this will be the hardest part to get the other part is a bridge rectifier

Thread view Attachments: 0

PSU missing parts

2014-09-11 by krikor kouchian

Hello, I have a spare PSU for my emax, but it is missing parts on it, it is not an original one but a more modern by SKYNET. Here is a picture with the missing

Thread view Attachments: 0

Re: Advice for a broken Emax !

2014-09-11 by Lorne Hammond

and since you have two and one works, why not open them both, disconnect the power supply in each and with a VOM measure the Powersupply of the bad one

Thread view Attachments: 0

Re: [emax] Advice for a broken Emax !

2014-09-11 by Ted Summers

Johnny- I still sell SCSI kits, SE update disks (although you can make them for free from the group files section). I do look at boards (I ve fixed 5 out of 6

Thread view Attachments: 0

Advice for a broken Emax !

2014-09-11 by johnny@...

Everyone, I had an Emax SE rack I wanted to upgrade to SCSI, but the CPU board was Rev 2, Ver C. I was unsure if the SCSI kit was going to support it, if I

Thread view Attachments: 0

Re: Chinese floppy emulator

2014-09-07 by xeelox@...

Put me down as well; I am quite interested. And maybe I missed it somewhere along the way, but what is the media type? - Jim

Thread view Attachments: 0

RE: [emax] Re: Chinese floppy emulator

2014-09-07 by Lorne Hammond

put me down for one unit. Lorne From: emax@yahoogroups.com [mailto:emax@yahoogroups.com] Sent: September-07-14 12:15 PM To: emax@yahoogroups.com Subject: Re:

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-09-07 by bmacdoug1 .

Jammie, Ted, Put me down as very interested in the combo drive. Have installed Ted s Scsi kits in Emax 1 s along with OLED display. Currently have Emax rack

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-09-07 by JAMIE logan

im away at the moment for all of september meeting with manufacturers i have 3 prototypes which were bare metal cases 2 normal size 3.5 drives and 1 emax

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-09-05 by Ted Summers

No- Jammie is waiting to get metalwork from manufacturing and powdercoated. At least that is my understanding. Last also Jammie commented I think it is 1 to 2

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-09-05 by Niklas Ehrlin

Aha ok, sounds very interesting. I managed to install the slim floppy, with the modded adapter, and the machine seems to be working just fine! Thanks for all

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-09-05 by Ted Summers

It s a project he is working on. It is not complete yet. Slim floppy and media drive in 1 to just put in Emax directly, no adapters, etc. Please follow the

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-21 by bmacdoug1 .

Jamie, because of the efforts of you and Ted, I am thankful. I would have never got this far in my appreciation of these wonderful instruments. I m here in the

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-20 by JAMIE logan

october - november im waiting on metal work the mock version was agreed i now have to wait for final production as i got a bare metal bracket but the finished

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-20 by JAMIE logan

thats from the eps site is from me yes a 7720uw will work but it has to be external as its to slow for the asr10 from boot so you have to switch on the

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-20 by bmacdoug1 .

Regarding flashing the Gotek floppy emulators, I found this interesting article. According to the author of the article Transforming the Gotek Floppy Emulator

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-19 by JAMIE logan

thats because he does not right the firmware it is the 7720uw firmware form acard that he uses he flashes them with the mac firmware version but you can use

Thread view Attachments: 0

Re: [emax] Re: Chinese floppy emulator

2014-08-19 by bmacdoug1 .

OK well maybe somebody will make it happen someday. wish i could compile firmware? anybody have any suggestions on where to start learn such a talent...... Do

Thread view Attachments: 0

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.