take the plunge and try it thats the only way your going to find out
but just because it works in a mac se 30 does not mean it will work in an emaxOn 13 August 2014 17:38, 'bmacdoug1 .' jasonmcdougal@... [emax] <emax@yahoogroups.com> wrote:
It's too bad it doesn't work, because i use it with my 720kb Akai MPC60 perfectly. Works great with this application, even has internal memory that holds your last work. Couldn't be any easier.What i would like to try is this:
CF AztecMonster CF-3.5" SCSI Converter CardThis card can convert CF memory card or MicroDrive to 3.5inc. desktop SCSI interface HDD, such as Mac SE/30, Quadra, or AKAI sampler. If it works with a MAC SE/30 why wouldn't it work with the EMAX?
On Wed, Aug 13, 2014 at 5:24 AM, JAMIE logan jammie.emma@blueyonder.co.uk [emax] <emax@yahoogroups.com> wrote:
yamaha sy85 and sy99i have fitted them to k5000rthere is no support for them when you receive them you get some one else's softwarethere is jumpers for ds1 ds0 there are jumpers for ready and other signalsno it does not workeven in dos based machines it can be a right pain to get working
there a few other yams it works on but apart from that they dont work on most only dos based systems if it uses a pre pc format
like the special formats that many synths and samplers used you need drivers so that the emulators can do that formatand why the hxc works as they add the code so specific floppy formats work and are always adding them when people ask about there machines and they buy one and they send jeff the image format and he always tries his best to add it
On 13 August 2014 12:49, cheju_99@... [emax] <emax@yahoogroups.com> wrote:
Ok, thanks for the support!!.. I supposed it will not work....
Ricardo