Re: Corrected Spelling
2006-02-10 by gil_we
To replace the battery type with Lithium you should block the charger, otherwise the battery would explode (it is not rechargable). To do that, replace the
Yahoo Groups archive
Messages
Page 11 of 17 · 824 messages matched
2006-02-10 by gil_we
To replace the battery type with Lithium you should block the charger, otherwise the battery would explode (it is not rechargable). To do that, replace the
2006-02-08 by faisanvideo
If anyone would like to hear the sounds of my SX-210 over the telephone, send me an email with your tel number or request mine. Evenings would be good.
2006-02-08 by faisanvideo
In defence of the notorious Ni-Cd 3.6v 50mah (see Photos) I would like to say that I purchased my SX-210 back in 1982 and I have only recently replaced the
2006-02-08 by faisanvideo
Dear Members, Due to arthritis I will be selling my SX-210. I thought I would offer it to group members first before I put it on eBay, I would describe my
2006-02-08 by faisanvideo
In defence of the notorious Ni-Cd 3.6v 50mah (see Photos) I would like to say that i perchased my SX-210 back in 1982 and i have only recently replaced the
2006-02-07 by faisanvideo
Hi, I had sent three emails on monday 6th Feb none of which have appeared on the group site, has anyone else exsperienced problems? Regards, Clive.07.02.06
2006-02-06 by spermafost
hi, could someone provide a precise diagram of the necessary mods to change the battery of my sx210. many thanks The battery is bigger on my sx240. Do they
2006-02-06 by gil_we
I recommend converting to Lithium which is a very simple procedure ... extention ... have ... not ... operating ... When I ... keyboard ... corrosion. ... that
2006-02-06 by texhand
... P. S. I used an equivalent radioshack cell phone battery with wire extention to side and it works fine.
2006-02-06 by texhand
... a month, there is a risk of losing the data memory.
2006-02-05 by cool_blue@f-m.fm
Not mine: http://www.vintagesynth.org/phpBB2/viewtopic.php?t=8198
2006-02-04 by bmurch71
Hi, I have an sx210 that has been doing fine for a few years now. I have read all the warnings about having the battery changed, but have not taken care of
2006-01-23 by Travis Shire
I don t recommend using a NiCd replacement. You can, but you have to keep a close eye on it checking it once a year for any crystaline buildup on the ends. The
2006-01-20 by cliverandle
Many thanks Travis; It was the ni-cad, (dammed silly place to put it) think i caught it just in time the circuit board was slightly corroded but still
2006-01-20 by Travis Shire
The memory back-up battery (Ni-Cd) has leaked and damaged the board. You ll have to have it repaired by a technician familiar with synth (battery leakage)
2006-01-18 by faisanvideo
Dear Members, Hello; my name is Clive. I have a Kawai SX-210, my problem is when i first switch on it continues to play a single cord as if the key hold was
2005-12-15 by gil_we
2005-12-10 by texhand
... Ebay-- has a kawai 210 listed today========++ Good luck!
2005-12-05 by gil_we
Thanks, I think I will just use a panel maounter jacks and wire them to the output board, hoding it by using two screws connected to the switches. ... standard
2005-12-04 by texhand
... I got some retro parts off e-bay from a seller chipforbrains I see no 1/4 jacks, but the inventroy is increasing with time... so one day it may have.
2005-12-02 by Christos Panagiotakis
Hi to you too!It was the same problem in mine..but I fixed it with simple soldering.the problem that I have now is that some notes sound whenever they
2005-12-02 by lnz2166
... 210 tha a customer brought in in pieces. What I noticed about these boards is that if the buttons were pushed hard because of dirty contacts, they had a
2005-12-02 by gil_we
I d like to replace them as they all broke up... these are not standard 1/4 ... any idea who sell the specific type ?
2005-11-28 by texhand
... I would use one of the factory patch settings to judge the keyboard, If you have not programmed with subtractive synthesis on this keyboard before. It
2005-11-27 by Travis Shire
Do this......remove the key contact strips. Grind up some pencil lead (graphite) into a powder using some sandpaper of about 220 grit. Rub the graphite
2005-11-26 by Christos Panagiotakis
Thanks I ll try that.. ... http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/QnLolB/TM ... === message truncated ===
2005-11-26 by gil_we
Have you tried to celan the RUBBER contacts (black round rubbers) ? you should use an eraser to do that, the type that you find on the top of pencils. ... ~-
2005-11-26 by Christos Panagiotakis
Yes I already did that..but still many keys were not playing.So I put the cotton between the key and the small rubber that you mention. So that it has more
2005-11-26 by gil_we
I am not sure I get your description about the cootin ball ? .... What you should do is to clean the contacts on the main keyboard boards, placed under the
2005-11-25 by Christos Panagiotakis
I cleaned one by one the contacts but many of the keys didn t play again..So what I did and I don t know if this is a right thing to do I put cotton balls
2005-11-24 by gil_we
Clean the key and switch contacts ... could be ... of ... light.. ... (had ... is to
2005-11-24 by texhand
... Great news: I hope the key function becomes an easy fix also.
2005-11-24 by brightoutside
How dum could I have been! There is a little button called memory protect and it was on... My Sx210 is nearly fully fuctional, only some keys don t work at
2005-11-23 by brightoutside
I was trying for some time to fix my sx210..At first nothing could be done.I found after a while that someone had connected wrong some of the cables..It became
2005-11-20 by texhand
--That would be nice, and take effort. I find a good sx210 lead becomes better once played within accustical sounding mix. Rather it s unique quality is
2005-11-19 by gil_we
EMS VCS3 - was their main synth on Wish you Were Here and Dark Side (the helli sounds) I think the SX210, among all my other 11 synths, can replicate thses
2005-11-19 by texhand
Thanks Gil-We VCs3(hum) that is a new one to me. I would not doubt you approximated the sound on the sx210 the machine I fine the sx210 to have great leads.
2005-11-19 by gil_we
Yeh, I know they should sound different, only that if you have to choose only one of them - the SX240 would be more versatile. I may sound not as good as the
2005-11-19 by gil_we
VCS3 I programmed my SX210 to make almost the exact sound ... wonder
2005-11-18 by texhand
... machine s strong point. Better for pads, strings, fx and some basses. ... However nothing like Pink Floyd s the machine Any Idea of what machine made
2005-11-18 by cflbeachlife
Thanks for the replies; boardjunkie@t: You re right, however the last one I saw there was being sold for parts and that was about 10 months ago... In fact,
2005-11-18 by cool_blue@f-m.fm
Some people prefer the sound of the 210. As I point out regularly here, they do sound different.
2005-11-18 by gil_we
Why not getting a SX240 ? ... sold. ... success; ... able ... play. ... -- ... --
2005-11-17 by Travis Shire
They re on Ebay from time to time. ... From: cflbeachlife To: kawai_sx210@yahoogroups.com Subject: [kawai_sx210] WTB - SX210 (Good Cond. to Mint) Date: Wed, 16
2005-11-16 by gil_we
I m not saying that could not be the EEPROM, but I recall myself suspecting the EEPROM a few times in the past, where no other component gave any clue as for
2005-11-16 by cflbeachlife
Hi all, New here and looking to replace the synth I never should have sold. Casually surfed the web for an SX210 for years without much success; found this
2005-10-27 by texhand
this stuff remindes me of my kawai and casio mix I really like Jon Bro oceanview http://www.gainlad.gameboymall.com/index.htm
2005-10-15 by Travis Shire
... Chances are it *is* a battery issue if it has been sitting for years unused. I couldn t get the pictures to load (I assume they were pictures from the
2005-10-14 by texhand
... Sounds good, no leak! I know sx240 has several fuses. I don t recall those in the sx210. Check the fuses and connects.
2005-10-14 by brightoutside
sorry had a problem with my email