Re: SX-210 SYN-43 Panel Arrangement Diagram photo?
2019-07-22 by bkezer1@...
Old post, sorry for just now replying. If you still need it, will this help? https://www.manualslib.com/manual/1009315/Kawai-Sx-210.html?page=22#manual
Yahoo Groups archive
Messages
Page 1 of 17 · 824 messages matched
2019-07-22 by bkezer1@...
Old post, sorry for just now replying. If you still need it, will this help? https://www.manualslib.com/manual/1009315/Kawai-Sx-210.html?page=22#manual
2018-08-19 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File : /Kawai
2017-10-01 by baccisimone@...
Hi. I own a Kawai sx240. Battery leakage ruined it. I made it repaired, and working. I put it aside three months without using it. Today I took it out its
2017-02-09 by w.james.meagher@...
Hi, I m wondering if anyone here has the original SX-210 Service Manual and could take and share a decent colour photo of page 22-23, the SYN-43 Panel
2017-02-09 by w.james.meagher@...
Hi xorsister, I m wondering if you ever got your SX210 envelope issue sorted out as mine is displaying the exact same issue. Cheers, James
2016-11-30 by pero.stranac@...
Via this listing: Kawai SX-210, Very rare 8-voice Analog Synth, Pro serviced, Excellent! http://rvrb.io/sx-210-yvb http://rvrb.io/sx-210-yvb Kawai SX-210, Very
2016-10-21 by Bacci Simone
That s what I was afraid of! Thank you very much Bob. Sim
2016-10-21 by Bacci Simone
Hi Gabe.Thank you for your suggestion, I ll try it during this weekend and I ll let you know. Have a nice day. Sim
2016-10-20 by gjcrossan@...
Hi Sim, I m no electronics expert either, but I wonder if one simple thing to try would be to leave it on for a few hours to let the battery accumulate a
2016-10-20 by Bob Grieb
I do not think the battery would cause this behavior, unless it leaked and damaged other circuits. With a dead or no battery, the buttons and displays should
2016-10-20 by baccisimone@...
Hi Bob. Thank you for your suggestions. I m not an electronic expert, but I ll try to do what you said. The most worrying thing is that when something turns
2016-10-20 by Bob Grieb
Hi, If the battery is too low, then the RAM contents will have been lost. Usually this means all programs in RAM are lost, which may be all there are. In that
2016-10-20 by baccisimone@...
I meant to say sometimes some buttons are on . Sorry. Have a nice day. Sim
2016-10-20 by baccisimone@...
Hi to everybody and thank you for letting me in this group. My cousin gave me an sx240 he bought in 1984. It doesn t work. When I switched on the Kawai,
2016-07-05 by eygpt1_amon_ra@...
Hi all, I am new to the group and need help. My SX-400 locks up on boot, It is the 100V model but I have the proper step-down transformer, It will temporarily
2016-07-01 by gjcrossan@...
I just saw this nice little VST instrument on KVR - the download link is in the first post: KVR Forum: KAWAI SX-240 free vst (Topic in the Instruments forum)
2016-03-25 by Bob Grieb
You are welcome. If anyone has any questions, feel free to ask. I didn t spend a lot of time trying to figure out the code. Just wanted to not have it come
2016-03-25 by dir_marillion@...
Hi Bob, Thank you very much for the file !!
2016-03-25 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File : /Kawai
2016-03-25 by Bob Grieb
I am guessing it doesn t matter that you are only playing white keys. Assuming that voices are allocated in sequence, every eighth key that you press will get
2016-03-25 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File :
2016-03-25 by pero.stranac@...
Hi everyone, I m new to this board and very happy it exists! :-) Recently I bought a SX-210 in very good condition. The battery is still original, no leaking
2016-03-25 by dir_marillion@...
Thank you very much for the Kawai SX-210 .bin ROM file kloendiesel. If someone has also the .bin ROM file for Kawai SX-240, please upload. Best Regards
2016-03-19 by ipc.de@web.de
Hi, I just wanted to let you know, that you are not alone. This is very common problem on the SX210. I have two models here which both show this envelope
2016-03-18 by aliendelon@...
Also i don t get peak on 13v after diode on the left
2016-03-18 by aliendelon@...
Hey guys! Still trying to fix one voice on my SX210 - its stuck infinitely - EG controls don t work, but filter envelope is - rest of the voices works fine I
2016-01-02 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File :
2015-12-31 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File : /Kawai
2015-12-31 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File : /Kawai
2015-12-28 by yuragavriluk@...
hello nedd firmware ... Would a .bin file be good enough? I could extract that from my SX210, which is on the bench anyway.
2015-12-27 by georg.mueller@...
Would a .bin file be good enough? I could extract that from my SX210, which is on the bench anyway.
2015-12-25 by yuragavriluk@...
need firmware Thank you in advance
2015-12-18 by dir_marillion@...
Merry Christmas Roby
2015-12-17 by roby.mx@...
Thank you for the gift... Merry Christmas! Ciao Roby
2015-12-17 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File : /Kawai
2015-12-07 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File :
2015-12-07 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File :
2015-12-07 by Kawai-Teisco@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Kawai-Teisco group. File :
2015-12-07 by motionboy@...
Hi all, Is there anybody out there who can tell me more about my broken Teisco 100f? It seams that the Power Supply Unit PSU is broken. Has anyone more
2015-09-16 by lackan110f@...
My SX400 is 3517, but its hard to tell if they started with 1 or 1000 . Unless you find someone marked 0052 or similar. Could also be that the 3
2015-08-25 by DA Stern
Yes, thanks. I had it fully serviced/checked out. On Tuesday, August 25, 2015 3:04 AM, gil_we@yahoo.com [Kawai-Teisco]
2015-08-25 by gil_we@...
Are you sure all functions actually work now ? Corroded boards are reflected as partially functional units.
2015-08-24 by DA Stern
Hey everybody, Thanks for having me in the group! I was wondering if anybody might be able to help me out in a bind. My SX-210 was left in storage for too
2015-07-25 by mad.bastard@...
Look in the files section of this group. I have uploaded all 4 banks. You can hook audio cables from your computer or whatever to play the sound files into the
2015-07-15 by elwro07@...
This might help a little: SX-210 manual on page 45 has 14 factory patches that you could program into it. http://www.kawaius-tsd.com/OM/K_SYNTH/SX210.pdf
2015-07-15 by gjcrossan@...
Sorry, that link was for the SX-240. Just saw you were actually after presets for tthe SX-210, which I don t have a link for. Hope someone else can help!
2015-07-15 by gjcrossan@...
http://www.synthmania.com/Kawai%20SX-240/Kawai%20SX-240%20presets%20waveforms/Kawai%20SX-240%20presets%20waveform.mp3
2015-07-15 by jankristoffersen2106@...
Hi! I got one «Kawai SX-210» and I got a problem that somebody might can help me with. I’ve lost all the sound presets, and need to find the tape with the
2015-06-02 by Bob Grieb
Just email when you are ready. Best to use the contact info on my siteso that I will have a record. Bob From: Jesse Hall jesse.hall@gmail.com
2015-06-02 by Jesse Hall
That is great news Bob, I have spent countless hours scouring the internet for info on designing such a device myself. I would like to order one of the boards