The Kawai & Teisco Analog Synths Group

I'd like to replace them as they all broke up... these are not standard 
1/4" ... any idea who sell the specific type ?

--- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
>
> I'd like to replace them as they all broke up... these are not standard 
> 1/4" ... any idea who sell the specific type ?

I got some retro parts off e-bay from a seller "chipforbrains" I see
no 1/4 jacks, but the inventroy is increasing with time... so one day
it may have.
>

Thanks,

I think I will just use a panel maounter jacks and wire them to the 
output board, hoding it by using two screws connected to the switches.

--- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
>
> --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> >
> > I'd like to replace them as they all broke up... these are not 
standard 
> > 1/4" ... any idea who sell the specific type ?
> 
> I got some retro parts off e-bay from a seller "chipforbrains" I see
> no 1/4 jacks, but the inventroy is increasing with time... so one 
day

> it may have.
> >
>

Hi,
is there any way to find a 1/4 unit replacement because mine is 
broken.
Or can i replace it with another set of jacks ?
Thanks


--- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@...> wrote:
>
> Thanks,
> 
> I think I will just use a panel maounter jacks and wire them to the 
> output board, hoding it by using two screws connected to the 
switches.
> 
> --- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> >
> > --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> > >
> > > I'd like to replace them as they all broke up... these are not 
> standard 
> > > 1/4" ... any idea who sell the specific type ?
> > 
> > I got some retro parts off e-bay from a seller "chipforbrains" I 
see

> > no 1/4 jacks, but the inventroy is increasing with time... so one 
> day
> > it may have.
> > >
> >
>

I replaced mine with a similar type only that their height was a bit
higher so now you cannot set for "protect"


--- In kawai_sx210@yahoogroups.com, "Olivier" <oabbeloos@...> wrote:

>
> Hi,
> is there any way to find a 1/4 unit replacement because mine is 
> broken.
> Or can i replace it with another set of jacks ?
> Thanks
> 
> 
> --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@> wrote:
> >
> > Thanks,
> > 
> > I think I will just use a panel maounter jacks and wire them to the 
> > output board, hoding it by using two screws connected to the 
> switches.
> > 
> > --- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> > >
> > > --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> > > >
> > > > I'd like to replace them as they all broke up... these are not 
> > standard 
> > > > 1/4" ... any idea who sell the specific type ?
> > > 
> > > I got some retro parts off e-bay from a seller "chipforbrains" I 
> see
> > > no 1/4 jacks, but the inventroy is increasing with time... so one 
> > day
> > > it may have.
> > > >
> > >
> >
>