Re: Betr: [Simmons Drums] SDS-5 factory setting not "crisp"
2009-07-07 by Lance
thx..Ill check it out ... From: Michael Buchner Subject: Re: Betr: [Simmons Drums] SDS-5 factory setting not crisp To:
Messages
Browse messages
Page 80 of 172 · 8595 messages matched
Re: Betr: [Simmons Drums] SDS-5 factory setting not "crisp"
2009-07-07 by Michael Buchner
Hello Lance, if your sounds at preset 2,3 and 4 sound ok, then there is nothing wrong with your modules. It is a matter of the factory presets settings. The
Re: Betr: [Simmons Drums] SDS-5 factory setting not "crisp"
2009-07-07 by Lance
Thanks...No..its a flat sound but it sounds just that...i know something is wrong though...do not have a video camera so not sure if i can ost the sound but
Betr: [Simmons Drums] SDS-5 factory setting not "crisp"
2009-07-07 by Berk Aarts
external mixing board? compressors? proper monitoring? listen to it on another speaker/pa system? tweak the settings? Film it and put it on youtube and ask the
SDS-5 factory setting not "crisp"
2009-07-06 by Lance
Hi all...so I have noticed that my factory sound pre-set is nopt as crispy as it should be...I have watched many of the YouTube vidoes and it seems the factory
Re: [Simmons Drums] Re: and the Pearl DRX1 drum module!
2009-07-06 by jesper
... Yes, Drum-X is nice but I prefer knobs and the ability to fine adjust settings. -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: and the Pearl DRX1 drum module!
2009-07-04 by ttete500
Yes,I think too,we can make very acoustic sound,the overtone parameter is very important in this case...... But I like it better to make SDS5 style
Alesis Trigger IO Usb w SDS9 Pads Unwanted Triggering
2009-07-04 by jeffkissinger
Anyone else using SDS9 pads with a usb midi trigger? I am getting unwanted triggers like crazy when playing in a loud live situation. I have been trying to
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-03 by roger.marchi
Thanks a lot for your replies! ... Here in Italy a couple of guys are selling their SDSV...they re just a bit expensive :-) . ... Just to enflame the
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-02 by Thomas Heckmann
Hi guys, I have this Fade To Grey sound programmed as a preset in my SDS V and it s exactly the same...and goes way below 50Hz, so beware of your speakers !
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-02 by jesper
Let me return to the topic when I m back with my collection! :) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-02 by roger.marchi
Hi Jesper... continuing for a while off topic: Fade To Grey was released as a 12 in the UK, but the version included was the 7 . Fade To Grey was also
Re: and the Pearl DRX1 drum module!
2009-07-02 by paolobarre
... I m a Pearl Drum-X owner... A part of the ugly octagonal pads, the sounds are very nice. I think it is a very flexible analog drum. Setting some particular
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-02 by jesper
... OT, but still... I m quite positive I have a 12 with the extended version from 1980. Yes... here s one:
SDX internal HD will not work! Can't get at the Simmons Library of disks!!
2009-07-01 by meadowpatrol
Hello Folk, I just fired up my SDX and I purchased it from a gentleman in the UK. He says it has 70MB HD (without the OS)on it. I m just trying to get at the
Betr: [Simmons Drums] Re: simmons for sale in holland
2009-07-01 by Berk Aarts
to keep things clear it s NOT mine ... Berk
Re: simmons for sale in holland
2009-07-01 by superwolle70
I knew I had seen that SDS9 before. I recognized it by my drop of sweat http://www.simmonsmuseum.com/p/items/sds9_top.jpg When will people learn...
simmons for sale in holland
2009-07-01 by Berk Aarts
My friends, found this on dutch Ebay http://link.marktplaats.nl/262284508 SDS 9 for ¤250,-- and a tama DS200 http://link.marktplaats.nl/261698263 Berk
and the Pearl DRX1 drum module!
2009-07-01 by ttete500
Hello, I just forgotten to mention the PEARL DRX1 analog drum module.... On it,the noise and the tone is filtered.... For me,one of the better and more
Re: Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-07-01 by ttete500
Hello, Here some comments about analog brains: *On the SDS5 and on the Tama Techstar only the noise is filtered. *On the SDS7,SDS8,SDS9,SDS1000,SDS800 400
Re: Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-06-30 by Gordon Pearce
... There can t be anything *too* complicated in the SDS8 power supply. It must provide a positive and negative rail somewhere about 15V for the analogue bits
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-06-30 by roger.marchi
Hi Dean, and thanks for your reply. The sound I intend to reproduce is best heard here: http://www.youtube.com/watch?v=EjzeSxgypE8 This is the 12 extended
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-06-30 by Dean Stewart Rumsey
Hi, I own an SDS1000. Regarding the sounds, the decay seemed long enough for me unless you are looking for a longer decay (I m not sure how long of one you
Re: [Simmons Drums] Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-06-30 by vaillant franck
Hi Roger! I have a sds8 fully working with 5 white pads. AND i m looking for a sds1000! my e-mail superbenzine@free.fr cheers ... [Non-text portions of this
Simmons SDS8 - SDS9 - SDS 1000 & "Fade To Grey"
2009-06-30 by roger.marchi
Hello everyone, that s my first post here and - of course - it s a request of help. I am from Italy and I m not sure if my english is correct and clear...hope
Re: [Simmons Drums] sds-V hihat pedal spring
2009-06-28 by vaillant franck
Ok! send me your Email adress at superbenzine@free.fr ... [Non-text portions of this message have been removed]
sds-V hihat pedal spring
2009-06-28 by jesper
I bought the used one Waveterm had for sale. Now I need to find a new spring for it so that it ll return to the original position after being pressed/stamped
Re: [Simmons Drums] ever heard an SDS3 and Analog Clap Trap in action?
2009-06-28 by jesper
... Short answer: Yes Longer answer: Another good one! Spread the legacy of the genuine Simmons sound to the masses on YouTube. :D -- electronically yours,
ever heard an SDS3 and Analog Clap Trap in action?
2009-06-28 by superwolle70
http://www.youtube.com/watch?v=JMBdXSob6ho
SDSV modifications
2009-06-22 by vaillant franck
Hi every body, I would like to modify the bend fonction on the toms the snare the bass drum and the hi-hat, make the same like cymbal module, ascendant and
SDSV rack
2009-06-19 by vaillant franck
http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=160343130777 [Non-text portions of this message have been removed]
Re: [Simmons Drums] Parts for sale
2009-06-16 by WT
I´ll be cleaning out SDS-V modules later this summer......stay tuned. WT ... From: WT To: Sent:
Re: [Simmons Drums] Parts for sale
2009-06-16 by WT
One Of the SDS-V transformers is labelled 12013 and the other is 10013. I suspect that one is for US voltage and the other is for Japanese voltage. The US is
Re: ABOUT THE SDSV ...
2009-06-15 by superwolle70
I just have a unit hooked up where you cannot adjust bend up in any module. So possibly there are several generations
simmons for sale in holland
2009-06-15 by Berk Aarts
hai sde expander http://link.marktplaats.nl/258446841 & SDS V http://link.marktplaats.nl/239178026 greets Berk
Re: [Simmons Drums] ABOUT THE SDSV ...
2009-06-15 by Michael Buchner
It is possible. On the Cymbal and Hihats there is an inverter circuit for this purpose, this has to be added. In fact this is only one IC, but it has to be
Re: [Simmons Drums] ABOUT THE SDSV ...
2009-06-15 by jesper
... Yes. You should be able to get it to do either or. -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
ABOUT THE SDSV ...
2009-06-15 by vaillant franck
Hi the group! Is it possible that the BEND parameter could be either positive or negative to get a descending or ascending sound ....( like on the SDS7 ) For
Something blasphemous for breakfast?
2009-06-12 by superwolle70
http://www.youtube.com/watch?v=D_CMd6iugWo
Re: [Simmons Drums] Parts for sale
2009-06-09 by Michael Buchner
You should take this positively! The transformer will match to any SDS7 on earth (I saw the pic, pink, white, orange prim coil conns a.s.o.). So anybody can
Re: [Simmons Drums] Parts for sale
2009-06-09 by WT
Michael, I´m not sure I should take this post positively :) Haha.... So, what you´re saying, the SDS-7 transformer is universal. Are all SDS-7 transformers
Re: [Simmons Drums] Parts for sale
2009-06-09 by Michael Buchner
Oh, I forgot: If you change the wiring of the SDS7s transformer to other voltages, check the FUSE: In case of 220/240V the fuse should be 1A, 100/120V 2A.
Re: [Simmons Drums] Parts for sale
2009-06-09 by Michael Buchner
Hello, to enhance your chance getting rid of the SDS7 transformer: It can be used (by changing the connections) for 240 (orange), 220 (pink), 120 (brown) and
Re: [Simmons Drums] Parts for sale
2009-06-09 by jimstew37
Actually, I would like to replace the transformer in my 240V SDSV. And I m in the US. Can we work the details (payment, shipping, etc.) via email? Thanks, Jim
Betr: Re: [Simmons Drums] Transparent SDSV Shells
2009-06-09 by Berk Aarts
30 per piece?? holy sh*t Berk
Betr: Re: [Simmons Drums] Transparent SDSV Shells
2009-06-09 by superwolle70
Last year I got me an offer for a small edition (100 pieces) of SDSV backside shells. Same material (clear and none painted acryl) with all shapes and
Betr: Re: [Simmons Drums] Transparent SDSV Shells
2009-06-08 by Berk Aarts
perhaps some one made his own?? Berk
Re: [Simmons Drums] Parts for sale
2009-06-08 by WT
Selector pads and Hihatpedal is sold. SDS-V handle is spoken for. Any americans need a transformer ? WT ... From: WT To:
Re: [Simmons Drums] Transparent SDSV Shells
2009-06-08 by jimstew37
Well, what I meant was that there seems to be no trace of any paint on the inside of the shells, assuming that they were painted in the first place. also, the
Re: [Simmons Drums] Transparent SDSV Shells
2009-06-08 by vaillant franck
... You said unless someone did an excellent job of removing the paint . How did he do? Thanks for your precious response. ... [Non-text portions of this