Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Index last updated: 2026-04-28 23:14 UTC

Thread

Parts for sale

Parts for sale

2009-06-07 by WT

1x SDS-V transformer 117V. 10 Euros
1x SDS-V transformer 117V ?? ( most likely ) 5 Euros

1x SDS-7 transformer 117V with mounting bracket. 20 Euros

1x SDS-7 programmer panel with working pot. Red plexi is loose but can be 
glued. Includes cable to CPU board 30 Euros.

1x SDS-7 ribboncable 1 Euros

1x SDS-V blank panel 10 Euros
1x SDS-V blank panel with d-sub connector. 5 Euros

1x SDS-V mixerpanel 5 Euros

1x SDS-V carrying handle 5 Euros

8x SDS-7 rubber caps for covering holes in frontpanel ( no modules 
installed ) 1 Euro each or 5 Euros for all.

1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros

1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn\ufffdt return 
to up position. 5 Euros.

Shipping costs and paypalfees added on top of total sellingprice.

Wanna give me offers ? I\ufffdm open for it.

Pictures here : 
http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/

WT

Re: [Simmons Drums] Parts for sale

2009-06-07 by jesper

WT skrev:
> 1x SDS-V blank panel with d-sub connector. 5 Euros

My old one? I sold a brain once with a lame d-sub on front.

> 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros

Tempting... hmmm...

> 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn´t return
> to up position. 5 Euros.

Sold! (to me)

-- 
electronically yours, jesper

- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
www.myspace.com/machinepop

Re: [Simmons Drums] Parts for sale

2009-06-08 by WT

Selector pads and Hihatpedal is sold.

SDS-V handle is spoken for.

Any americans need a transformer ?

WT

----- Original Message ----- 
From: "WT" <waveterm@...>
To: <Simmons_Drums@yahoogroups.com>
Cc: "Analogue Heaven" <analogue@...>
Show quoted textHide quoted text
Sent: Sunday, June 07, 2009 1:49 PM
Subject: [Simmons Drums] Parts for sale


> 1x SDS-V transformer 117V. 10 Euros
> 1x SDS-V transformer 117V ?? ( most likely ) 5 Euros
>
> 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
>
> 1x SDS-7 programmer panel with working pot. Red plexi is loose but can be
> glued. Includes cable to CPU board 30 Euros.
>
> 1x SDS-7 ribboncable 1 Euros
>
> 1x SDS-V blank panel 10 Euros
> 1x SDS-V blank panel with d-sub connector. 5 Euros
>
> 1x SDS-V mixerpanel 5 Euros
>
> 1x SDS-V carrying handle 5 Euros
>
> 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
> installed ) 1 Euro each or 5 Euros for all.
>
> 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
> 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
>
> 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn\ufffdt return
> to up position. 5 Euros.
>
> Shipping costs and paypalfees added on top of total sellingprice.
>
> Wanna give me offers ? I\ufffdm open for it.
>
> Pictures here :
> http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
>
> WT
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Re: [Simmons Drums] Parts for sale

2009-06-09 by jimstew37

Actually, I would like to replace the transformer in my 240V SDSV. And I'm in the US. Can we work the details (payment, shipping, etc.) via email?

Thanks,
Jim

 --- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
Show quoted textHide quoted text
>
> Selector pads and Hihatpedal is sold.
> 
> SDS-V handle is spoken for.
> 
> Any americans need a transformer ?
> 
> WT

Re: [Simmons Drums] Parts for sale

2009-06-09 by Michael Buchner

Hello,
to enhance your chance getting rid of the SDS7 transformer: It can be used (by changing the connections) for 240 (orange), 220 (pink), 120 (brown) and 100 (white) Volts. The other connection to the primary coil is always black. So, now you can start a worldwide offer!
B.t.w.: This is also the way to get rid of voltage-changing devices.
And it is NOT possible with these SDSV transformers.
Regards
Michael
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: WT 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Monday, June 08, 2009 8:59 PM
  Subject: Re: [Simmons Drums] Parts for sale





  Selector pads and Hihatpedal is sold.

  SDS-V handle is spoken for.

  Any americans need a transformer ?

  WT

  ----- Original Message ----- 
  From: "WT" <waveterm@...>
  To: <Simmons_Drums@yahoogroups.com>
  Cc: "Analogue Heaven" <analogue@...>
  Sent: Sunday, June 07, 2009 1:49 PM
  Subject: [Simmons Drums] Parts for sale

  > 1x SDS-V transformer 117V. 10 Euros
  > 1x SDS-V transformer 117V ?? ( most likely ) 5 Euros
  >
  > 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
  >
  > 1x SDS-7 programmer panel with working pot. Red plexi is loose but can be
  > glued. Includes cable to CPU board 30 Euros.
  >
  > 1x SDS-7 ribboncable 1 Euros
  >
  > 1x SDS-V blank panel 10 Euros
  > 1x SDS-V blank panel with d-sub connector. 5 Euros
  >
  > 1x SDS-V mixerpanel 5 Euros
  >
  > 1x SDS-V carrying handle 5 Euros
  >
  > 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
  > installed ) 1 Euro each or 5 Euros for all.
  >
  > 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
  > 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
  >
  > 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn´t return
  > to up position. 5 Euros.
  >
  > Shipping costs and paypalfees added on top of total sellingprice.
  >
  > Wanna give me offers ? I´m open for it.
  >
  > Pictures here :
  > http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
  >
  > WT
  >
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >



  

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Parts for sale

2009-06-09 by Michael Buchner

Oh, I forgot: If you change the wiring of the SDS7s transformer to other voltages, check the FUSE: In case of 220/240V the fuse should be 1A, 100/120V 2A.
Regards
Michael
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: jimstew37 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Tuesday, June 09, 2009 5:52 PM
  Subject: Re: [Simmons Drums] Parts for sale





  Actually, I would like to replace the transformer in my 240V SDSV. And I'm in the US. Can we work the details (payment, shipping, etc.) via email?

  Thanks,
  Jim

  --- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
  >
  > Selector pads and Hihatpedal is sold.
  > 
  > SDS-V handle is spoken for.
  > 
  > Any americans need a transformer ?
  > 
  > WT



  

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Parts for sale

2009-06-09 by WT

Michael,

I\ufffdm not sure I should take this post positively :) Haha....

So, what you\ufffdre saying, the SDS-7 transformer is universal. Are all SDS-7 
transformers like this, or where US SDS-7\ufffds sold with a 120V transformer 
only ?

If not, this one is of no use to anyone who needs a conversion. It could 
however be used if there\ufffds anyone who has a burnt out transformer that needs 
changing.

This transformer came from a shipping-damaged SDS-7 that I parted out. 
Actually I used three SDS-7\ufffds to build one fully equipped ( 12 card ) SDS-7.

WT
Show quoted textHide quoted text
----- Original Message ----- 
From: "Michael Buchner" <buchnerelectronics@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Tuesday, June 09, 2009 6:40 PM
Subject: Re: [Simmons Drums] Parts for sale


Hello,
to enhance your chance getting rid of the SDS7 transformer: It can be used 
(by changing the connections) for 240 (orange), 220 (pink), 120 (brown) and 
100 (white) Volts. The other connection to the primary coil is always black. 
So, now you can start a worldwide offer!
B.t.w.: This is also the way to get rid of voltage-changing devices.
And it is NOT possible with these SDSV transformers.
Regards
Michael
  ----- Original Message ----- 
  From: WT
  To: Simmons_Drums@yahoogroups.com
  Sent: Monday, June 08, 2009 8:59 PM
  Subject: Re: [Simmons Drums] Parts for sale





  Selector pads and Hihatpedal is sold.

  SDS-V handle is spoken for.

  Any americans need a transformer ?

  WT

  ----- Original Message ----- 
  From: "WT" <waveterm@...>
  To: <Simmons_Drums@yahoogroups.com>
  Cc: "Analogue Heaven" <analogue@...>
  Sent: Sunday, June 07, 2009 1:49 PM
  Subject: [Simmons Drums] Parts for sale

  > 1x SDS-V transformer 117V. 10 Euros
  > 1x SDS-V transformer 117V ?? ( most likely ) 5 Euros
  >
  > 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
  >
  > 1x SDS-7 programmer panel with working pot. Red plexi is loose but can 
be
  > glued. Includes cable to CPU board 30 Euros.
  >
  > 1x SDS-7 ribboncable 1 Euros
  >
  > 1x SDS-V blank panel 10 Euros
  > 1x SDS-V blank panel with d-sub connector. 5 Euros
  >
  > 1x SDS-V mixerpanel 5 Euros
  >
  > 1x SDS-V carrying handle 5 Euros
  >
  > 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
  > installed ) 1 Euro each or 5 Euros for all.
  >
  > 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
  > 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
  >
  > 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn\ufffdt 
return
  > to up position. 5 Euros.
  >
  > Shipping costs and paypalfees added on top of total sellingprice.
  >
  > Wanna give me offers ? I\ufffdm open for it.
  >
  > Pictures here :
  > http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
  >
  > WT
  >
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >





[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

Re: [Simmons Drums] Parts for sale

2009-06-09 by Michael Buchner

You should take this positively! The transformer will match to any SDS7 on earth (I saw the pic, pink, white, orange prim coil conns a.s.o.). So anybody can use it as replacement. B.t.w.: Increase the price...
Regards
Michael
Show quoted textHide quoted text
  ----- Original Message ----- 
  From: WT 
  To: Simmons_Drums@yahoogroups.com 
  Sent: Tuesday, June 09, 2009 10:43 PM
  Subject: Re: [Simmons Drums] Parts for sale





  Michael,

  I´m not sure I should take this post positively :) Haha....

  So, what you´re saying, the SDS-7 transformer is universal. Are all SDS-7 
  transformers like this, or where US SDS-7´s sold with a 120V transformer 
  only ?

  If not, this one is of no use to anyone who needs a conversion. It could 
  however be used if there´s anyone who has a burnt out transformer that needs 
  changing.

  This transformer came from a shipping-damaged SDS-7 that I parted out. 
  Actually I used three SDS-7´s to build one fully equipped ( 12 card ) SDS-7.

  WT

  ----- Original Message ----- 
  From: "Michael Buchner" <buchnerelectronics@...>
  To: <Simmons_Drums@yahoogroups.com>
  Sent: Tuesday, June 09, 2009 6:40 PM
  Subject: Re: [Simmons Drums] Parts for sale

  Hello,
  to enhance your chance getting rid of the SDS7 transformer: It can be used 
  (by changing the connections) for 240 (orange), 220 (pink), 120 (brown) and 
  100 (white) Volts. The other connection to the primary coil is always black. 
  So, now you can start a worldwide offer!
  B.t.w.: This is also the way to get rid of voltage-changing devices.
  And it is NOT possible with these SDSV transformers.
  Regards
  Michael
  ----- Original Message ----- 
  From: WT
  To: Simmons_Drums@yahoogroups.com
  Sent: Monday, June 08, 2009 8:59 PM
  Subject: Re: [Simmons Drums] Parts for sale

  Selector pads and Hihatpedal is sold.

  SDS-V handle is spoken for.

  Any americans need a transformer ?

  WT

  ----- Original Message ----- 
  From: "WT" <waveterm@...>
  To: <Simmons_Drums@yahoogroups.com>
  Cc: "Analogue Heaven" <analogue@...>
  Sent: Sunday, June 07, 2009 1:49 PM
  Subject: [Simmons Drums] Parts for sale

  > 1x SDS-V transformer 117V. 10 Euros
  > 1x SDS-V transformer 117V ?? ( most likely ) 5 Euros
  >
  > 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
  >
  > 1x SDS-7 programmer panel with working pot. Red plexi is loose but can 
  be
  > glued. Includes cable to CPU board 30 Euros.
  >
  > 1x SDS-7 ribboncable 1 Euros
  >
  > 1x SDS-V blank panel 10 Euros
  > 1x SDS-V blank panel with d-sub connector. 5 Euros
  >
  > 1x SDS-V mixerpanel 5 Euros
  >
  > 1x SDS-V carrying handle 5 Euros
  >
  > 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
  > installed ) 1 Euro each or 5 Euros for all.
  >
  > 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
  > 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
  >
  > 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn´t 
  return
  > to up position. 5 Euros.
  >
  > Shipping costs and paypalfees added on top of total sellingprice.
  >
  > Wanna give me offers ? I´m open for it.
  >
  > Pictures here :
  > http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
  >
  > WT
  >
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >

  [Non-text portions of this message have been removed]

  ------------------------------------

  Yahoo! Groups Links



  

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Parts for sale

2009-06-16 by WT

One Of the SDS-V transformers is labelled 12013 and the other is 10013. I 
suspect that one is for US voltage and the other is for Japanese voltage.

The US is spoken for.....

I bet there are SDS-V\ufffds in Japan that needs a transformer. Price updated to 
10 Euros.

Also, I have an MTM for sale. It is missing knobcaps and sometimes spits out 
lots of triggers at random speed. Never managed to find the time to fix it. 
Sold as is. 60 Euros. User and Service manual included.

I have a German MTM manual and bad condition. 5 Euros.

WT - Cleaning out the garage......

----- Original Message -----
Show quoted textHide quoted text
From: "WT" <waveterm@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Monday, June 08, 2009 8:59 PM
Subject: Re: [Simmons Drums] Parts for sale


> Selector pads and Hihatpedal is sold.
>
> SDS-V handle is spoken for.
>
> Any americans need a transformer ?
>
> WT
>
> ----- Original Message ----- 
> From: "WT" <waveterm@...>
> To: <Simmons_Drums@yahoogroups.com>
> Cc: "Analogue Heaven" <analogue@...>
> Sent: Sunday, June 07, 2009 1:49 PM
> Subject: [Simmons Drums] Parts for sale
>
>
>> 1x SDS-V transformer 120V ??( most likely ). 10 Euros
>> 1x SDS-V transformer 100V ??( most likely ) was 5 Euros, now 10 Euros.
>>
>> 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
>>
>> 1x SDS-7 programmer panel with working pot. Red plexi is loose but can be
>> glued. Includes cable to CPU board 30 Euros.
>>
>> 1x SDS-7 ribboncable 1 Euros
>>
>> 1x SDS-V blank panel 10 Euros
>> 1x SDS-V blank panel with d-sub connector. 5 Euros
>>
>> 1x SDS-V mixerpanel 5 Euros
>>
>> 1x SDS-V carrying handle 5 Euros
>>
>> 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
>> installed ) 1 Euro each or 5 Euros for all.
>>
>> 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
>> 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
>>
>> 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn\ufffdt 
>> return
>> to up position. 5 Euros.
>>
>> Shipping costs and paypalfees added on top of total sellingprice.
>>
>> Wanna give me offers ? I\ufffdm open for it.
>>
>> Pictures here :
>> http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
>>
>> WT
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Re: [Simmons Drums] Parts for sale

2009-06-16 by WT

I\ufffdll be cleaning out SDS-V modules later this summer......stay tuned.

WT

----- Original Message -----
Show quoted textHide quoted text
From: "WT" <waveterm@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Tuesday, June 16, 2009 9:55 PM
Subject: Re: [Simmons Drums] Parts for sale


> One Of the SDS-V transformers is labelled 12013 and the other is 10013. I
> suspect that one is for US voltage and the other is for Japanese voltage.
>
> The US is spoken for.....
>
> I bet there are SDS-V\ufffds in Japan that needs a transformer. Price updated 
> to
> 10 Euros.
>
> Also, I have an MTM for sale. It is missing knobcaps and sometimes spits 
> out
> lots of triggers at random speed. Never managed to find the time to fix 
> it.
> Sold as is. 60 Euros. User and Service manual included.
>
> I have a German MTM manual and bad condition. 5 Euros.
>
> WT - Cleaning out the garage......
>
> ----- Original Message ----- 
> From: "WT" <waveterm@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Monday, June 08, 2009 8:59 PM
> Subject: Re: [Simmons Drums] Parts for sale
>
>
>> Selector pads and Hihatpedal is sold.
>>
>> SDS-V handle is spoken for.
>>
>> Any americans need a transformer ?
>>
>> WT
>>
>> ----- Original Message ----- 
>> From: "WT" <waveterm@...>
>> To: <Simmons_Drums@yahoogroups.com>
>> Cc: "Analogue Heaven" <analogue@...>
>> Sent: Sunday, June 07, 2009 1:49 PM
>> Subject: [Simmons Drums] Parts for sale
>>
>>
>>> 1x SDS-V transformer 120V ??( most likely ). 10 Euros
>>> 1x SDS-V transformer 100V ??( most likely ) was 5 Euros, now 10 Euros.
>>>
>>> 1x SDS-7 transformer 117V with mounting bracket. 20 Euros
>>>
>>> 1x SDS-7 programmer panel with working pot. Red plexi is loose but can 
>>> be
>>> glued. Includes cable to CPU board 30 Euros.
>>>
>>> 1x SDS-7 ribboncable 1 Euros
>>>
>>> 1x SDS-V blank panel 10 Euros
>>> 1x SDS-V blank panel with d-sub connector. 5 Euros
>>>
>>> 1x SDS-V mixerpanel 5 Euros
>>>
>>> 1x SDS-V carrying handle 5 Euros
>>>
>>> 8x SDS-7 rubber caps for covering holes in frontpanel ( no modules
>>> installed ) 1 Euro each or 5 Euros for all.
>>>
>>> 1x SDS-7/MTM Selector Pad with 1 broken selector 10 Euros
>>> 1x SDS-7/MTM Selector Pad with 11 broken selectors 5 Euros
>>>
>>> 1x SDS-V Hihatpedal very dirty and rusty. Missing spring so doesn\ufffdt
>>> return
>>> to up position. 5 Euros.
>>>
>>> Shipping costs and paypalfees added on top of total sellingprice.
>>>
>>> Wanna give me offers ? I\ufffdm open for it.
>>>
>>> Pictures here :
>>> http://www.flickr.com/photos/28928718@N07/sets/72157607120036640/
>>>
>>> WT
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.