Betr: [Simmons Drums] SDS-8 bass drum no longer triggering
2010-05-17 by Berk Aarts
Hi don t wanna be a jerk, are you sure it s the pad (did you plug it in another input on the module??) Did you check the bassdruminput with another pad, so
Messages
Browse messages
Page 65 of 172 · 8595 messages matched
Re: [Simmons Drums] Re: SDS-8 bass drum no longer triggering
2010-05-17 by Jacquot.Patrice@free.fr
A real Tutorial though ! :-) I wonder sometimes if Wolfgang & Michaël didn t work at Simmons in another life.
Re: [Simmons Drums] SDS-8 bass drum no longer triggering
2010-05-17 by Jacquot.Patrice@free.fr
;-) ... No tutorial from me, as Wolfgang or Michael have probably opened more pads that I will ever do. but you re right...I would check for sure socket
Re: SDS-8 bass drum no longer triggering
2010-05-17 by superwolle70
Hi Nick, unless it is really an SDS8 bassdrum pad: to get access to the inside you need to curve the rubber edge away to get access to the staple nails. You
Re: [Simmons Drums] SDS-8 bass drum no longer triggering
2010-05-17 by jesper
... I bet a few of the Simmons GODS (tm) in here can answer but I want to start by calming you down and say, it can be fixed. The pads are basically a box with
SDS-8 bass drum no longer triggering
2010-05-17 by spindrum
Hello everyone - Last night in the middle of a show I was performing at, my SDS-8 bass drum stopped triggering. I checked the chord and the module and both
Re: [Simmons Drums] Re: SDE expander
2010-05-16 by Jacquot.Patrice@free.fr
... Absolutely ... ;-) ... so, good luck ...
Re: SDE expander
2010-05-16 by Jonathan
Thanks for the info on this, especially not to pay too much.... If the price stays low I ll put in for it as I ve got a MIDI keyboard, although it would be
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by Jacquot.Patrice@free.fr
Not sure we re talking about the same aspects, & to see any link with prices, sellers & buyers. Of course Wolfgang & Michaël have the freedom to share or not
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by Thomas Heckmann
Some people just don t want to share and some just take all for granted ! Some people here on the list share all their stuff and some don t even bother ! So
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by Jacquot.Patrice@free.fr
;-) yep lo fi... I don t know why I keep thinking that the lo fi should be lo priced...
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by Jacquot.Patrice@free.fr
What will it change ? What did want the buyer ? Are you sure it s all about the Eproms ?
Re: [Simmons Drums] this weeks worst Ebay price
2010-05-16 by Jacquot.Patrice@free.fr
Well ... as long as someone is ready to pay such a price for what it is. When you know what an SDS1 does... Really... What sort of of cult could it be then ?
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by jesper
... It s a splendid service you do for all those too scared with electronics to fix it themselves! :) As mentioned before, I use my two SDS-1s for effect
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by jesper
... I think 150 would be OK for all those proms etc, but I agree, hence the sharing. Regarding the data on the proms I bet it s Michael who made it public, but
Re: this weeks worst Ebay price
2010-05-16 by superwolle70
I have removed the eprom binaries
Re: [Simmons Drums] Re: this weeks worst Ebay price
2010-05-16 by Michael Buchner
I don t get a cut of the sale, but it was my fault (?) to publish the binaries at Simmonsmuseum. I have to live with it. There are nearly 300 eprom sounds in
Re: this weeks worst Ebay price
2010-05-16 by Ed
You have got to be kidding me. Totally absurd. About $500 too much if you ask me. You could ve gotten a SDSV or SDS7 for that kind of money. Also, Michael -
this weeks worst Ebay price
2010-05-15 by jesper
And it sold at 561.50 USD! http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=280502416104 -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] SDE expander
2010-05-15 by Jacquot.Patrice@free.fr
Hi jonathan, following my own experience of it.... I used the SDE as an add on to my Keyboards & expander setup. And played it from a keyboard. It has its
Re: [Simmons Drums] SDE expander
2010-05-15 by jesper
... Simmons Drum Expander. Sounds like a good description. ;) ... Yes... it s for percussion sounds. but... ... FM was _thee_ thing 1986. Think Yamaha DX-7 and
Re: SDE expander
2010-05-15 by superwolle70
The SDE is a bit like a rack version of the Silicon mallet. It sounds similar to the DX7: nice bell sounds and any kind of (FM like artificial) chromatic
SDE expander
2010-05-15 by Jonathan
Hi, There s one of these come up - I ve googled it, but am still a bit unsure as to what it does. My understanding is that you can hook it up to eg SDS9 via
Knob Caps
2010-05-14 by Ed
Hey all. Check out the knob cap pictures I uploaded to the Photos section. The company that makes them, Elma, has a crazy minimum order so I used it as an
Re: SDSV modules in SDS7?
2010-05-14 by Ed
Jesper s right - you could figure out a way to cram it in there. But, it would take some serious egg-heading and cost way more than buying an average condition
Re: [Simmons Drums] SDSV modules in SDS7?
2010-05-14 by jesper
... First rule: Everything _can_ be modified! Second rule: Not everything is _good_ to modify. First of all you need a saw to adopt the front panel(s). I
SDSV modules in SDS7?
2010-05-14 by Chris
Hi guys, Can you install SDSV modules into an SDS7 brain? I m sure I ve seen this done somewhere, or is this just one of my many weird Simmons dreams that I
Roland pm-16 +M-audio Midisport for sale !
2010-05-14 by sander
Hi gang , I have these two items for sale , if anyone is interested please contact me , the link is =
Re: Betr: [Simmons Drums] eprom burner
2010-05-08 by iantoau
where on that site? it is not the one but where?
Betr: [Simmons Drums] eprom burner
2010-05-08 by Berk Aarts
www.ucapps.de ??? perhaps
eprom burner
2010-05-08 by iantoau
hello everyone i don t care if it a original simmons, i am thinking of getting an eprom burner. does anyone know of any good burning devices with software to
Re: [Simmons Drums] MTM schematics wanted
2010-05-07 by jesper
... I got them offlist because of the recent flaming, but they were at Paul s site all the time. It was me who was blind... thanks anyway, -- electronically
Re: [Simmons Drums] MTM schematics wanted
2010-05-06 by Jacquot.Patrice@free.fr
Hi Jesper, I just found some MTM schematics, do you still need some ? all the Best , Patrice.
Re: [Simmons Drums] Re: Bass spurs or make a replacement?
2010-05-05 by jesper
... Very good Ebay posting IMHO. And yes, Ebay links are OK if it s something like this or something for the general debate, like modified units, prototypes,
Re: Bass spurs or make a replacement?
2010-05-05 by superwolle70
The spurs appear in slightly different diameters depending on the pad generation. I would ask the seller
Re: my travelogue
2010-05-05 by superwolle70
sorry, Alfonso! Of course I will share my experiences with the community. I already opened one of these pads. Surprise! Surprise! More later...
Re: Bass spurs or make a replacement?
2010-05-05 by Chris
I know we re not supposed to post ebay links, but these seem like exceptional circumstances. Are these any help to you?
Re: [Simmons Drums] my travelogue
2010-05-05 by jesper
... Do I know that feeling... with the exception that it s ever-so-often our own techno guru Thomas responsible when I m outbid. ... -- electronically yours,
my travelogue
2010-05-05 by ALFONSO PACHES
Hi Wolfgang I´m the guy who lost the Musicaid kit in the last second because someone bid more than me... Do you know something about that?, Ja,ja,ja. I´m
my travelogue
2010-05-04 by superwolle70
http://simmonsmuseum.wordpress.com/2010/05/04/a-day-in-the-life-of-a-vintage-gear-fetishist/
Re: [Simmons Drums] MTM Loses memory in user banks after shut down.
2010-05-04 by jesper
... Have you still got it? One of my MTMs did exactly that one day and it was just a dirty socket. ... Sounds like a crappy battery. I changed one a few days
Re: [Simmons Drums] MTM Loses memory in user banks after shut down.
2010-05-04 by WT
Open up and inspect the battery for leakage. Change it. WT ... From: midiizer To: Sent: Tuesday, May 04,
MTM Loses memory in user banks after shut down.
2010-05-03 by midiizer
The first MTM I got the LED screen did not work - thanks eBay. Now The New one I just got will not hold any of the changes I make to the user banks. For
Re: [Simmons Drums] MTM schematics wanted
2010-05-01 by jesper
... And we both did apparently - messy weekend. :D -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] MTM schematics wanted
2010-05-01 by Jacquot.Patrice@free.fr
Yes for sure, I thought I sent that post to the list.
Re: [Simmons Drums] MTM schematics wanted
2010-05-01 by jesper
I ll sum it up to the list. I think more can benefit from the setup info... /j. ... -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: Betr: [Simmons Drums] velocity -> hihat pedal?
2010-05-01 by Jacquot.Patrice@free.fr
mmm Jesper , could you describe your settings & precise hardware connections so ? I wanna do that from a Drumkat or Trapkat. Patrice.
Re: [Simmons Drums] MTM schematics wanted
2010-05-01 by Jacquot.Patrice@free.fr
Hi Jesper , I see you re facing same things I experimented with MTM. one of the most Mysterious Simmons Gear to me. even Bill Bruford found it complicated &
Re: [Simmons Drums] A happy new SDS III owner :-)
2010-04-30 by superwolle70
We are talking about the same auction... Only one of the pads, the one with the white surface, is made of wood. The other black pads already have acrylic
Re: [Simmons Drums] A happy new SDS III owner :-)
2010-04-30 by jimstew37
Hey, Wolfgang, nice score! I saw those pads and box(es) on the UK ebay a few weeks ago. Don t recall anyone here mentioning the listing, though. Is it fair to