Re: Hi./ Questions re: Teisco 100P aftertouch remedies/response.
2008-02-04 by gil_we
Hi, I don t know the 100P very much, but you can try the vintagesynthrepair group ;) ... and I just became the dubious winner of an eBay lottery Teisco
Yahoo Groups archive
Messages
Page 8 of 17 · 824 messages matched
2008-02-04 by gil_we
Hi, I don t know the 100P very much, but you can try the vintagesynthrepair group ;) ... and I just became the dubious winner of an eBay lottery Teisco
2008-01-25 by John Brod
Hi folks. I just joined the Kawai-Teisco group. MY name s Tony, and I just became the dubious winner of an eBay lottery Teisco 100P . I say dubious
2008-01-19 by gmanca101
I thought I had tested the Rails correctly, but the +5v was the culprit; replaced the 2SC356 with a 2N4401 and it worked. I noticed that the SX240 patch file
2008-01-19 by gmanca101
Thanks for the reply, I appreciate it! Well, I have no schematics for it and I looked at the power supply and it seems fine given those voltages you have. I
2008-01-19 by Travis Shire
Do you know what you re looking for? You should have +/-15v for the op amps and +5 for the logic. Check for that at the connector that comes from the pwr
2008-01-18 by Sérgio Martins Marques
! my bad. I have been sooooo busy. But I hereby SWEAR :) I will take them (and try to post) today. BTW... does anyone have TEISCO knobs for sale? I would need
2008-01-17 by M.J.B.
pictures? ... y[]a[]z[]z[]o[]f[]e[]v[]e[]r[] ____________________________________________________________________________________ Be a better friend,
2008-01-16 by gmanca101
Hello all! I just recently got a Kawai SX240 that won t turn on; the piezo buzzer emits a whine when I turn it on; I replaced the three big caps in the power
2008-01-10 by Sérgio Martins Marques
for sure as soon as I can (definitely before sunday)
2008-01-10 by M.J.B.
Hey there! How about a picture of this dust cover please! And a picture of your synth. I m building a database of teisco 110f stuff... Let me know. micah ...
2008-01-09 by SergioMMMS
! Got my 110F today ! Guess what... it came with a surprise: a TEISCO dust cover :) I could not believe how pristine it is... mainly because I bought it from a
2008-01-04 by texhand
... nice synth you have. Here is a page with the manual. There exist a site with samples somewhere. http://www.vintagesynth.com/index2.html The samples were
2008-01-03 by SergioMMMS
... I´ve recently bought an SX-400... currently trying to find the time to start the (serious) repair... AND... I´ve payed TODAY for a 110f coming from the
2008-01-03 by yazzofever
I m trying to find out how many are using teisco 110f s out there. Also, do you have any stuff for them, gig bags, brochures, accesories, anything like that?
2007-11-19 by rodrigo
THANKS gil! ... is ... it is a 210 or 240. What you *do* need to do is have the battery that holds the presets replaced and any damage it may have caused by
2007-11-19 by Travis Shire
... quite ... why i need the data tape.I dont have any sounds in my keyboard You *don t* need the factory patch tape to *program* it providing it is a 210 or
2007-11-19 by rodrigo
I CAN T PROGRAM my own patches because i lost all the sounds!that is why i need the data tape.I dont have any sounds in my keyboard Thanks again!
2007-11-18 by rodrigo
... quite ... factory ... why i need the data tape.I dont have any sounds in my keyboard
2007-11-18 by gil_we
Why would you do so ? the original presets are nothing exciting, quite boring. Program your custom patches ! ;)
2007-11-18 by rodrigo
I lost my patchs.the problem is i dont have the tape with the factory patches.Can you tell me some adress to find this ? Thanks Rodrigo
2007-09-16 by yazzofever
In the USA, have refrences, let me know please. Micah
2007-09-11 by Travis Shire
You have battery damage I d say. Have it looked at ASAP. hi all i am about to get it but the specific one has the following prblem...when ones turns it on the
2007-09-11 by texhand
... There is no reset proceedure for the kawai sx 210. Mine always resets to patch a1 when turned on. INSTANTLY! Presets are via tape backup if you have the
2007-09-10 by openoceantrance
is there a reset procedure ?
2007-09-10 by openoceantrance
hi all i am about to get it but the specific one has the following prblem...when ones turns it on the lcd goes circles - you know an L shaped that goes round
2007-08-27 by rodrigo
... thanks, but i need the syn43 board.Not the syn42 board thats who appear in this FILES
2007-08-27 by Travis Shire
Look in the files section...the schematic is in there. Please i need the service manual of my kawai sx-210.Can you tell me where find this? -- We ve Got Your
2007-08-27 by rodrigo
Please i need the service manual of my kawai sx-210.Can you tell me where find this?
2007-08-09 by riderinaygsryhdujdgttexas
I believe you hope to have more friends, me too! I am looking for riding buddies and serious friends, check my personal page here:
2007-07-31 by MadjacK
I was wondering if anyone in the group has had experience using the Anatek Pocket Filter? I recently obtained one without operating instructions and am at a
2007-07-28 by gil_we
Hi , a bit off topic, but how do you find this synth ? is it exceptional in any way ?
2007-07-09 by yazzofever
I live in the USA. And have perfect feedback on ebay and paypal. Please let me know. M
2007-06-26 by Joe Judd
Thanks Madjack, is it the 3 pyramid or 3 stacked batteries? BattR5 - 3.6V / 170mA Stacked Rechargeable Battery... You are a great help! ... From: MadjacK
2007-06-25 by MadjacK
Anyone plan on replacing their Kawai SX-240 battery...one website : www.solarbotics.com I got a new battery ( 3.6V 170mAh Rechargeable Ni-Cad battery ) from
2007-06-16 by gil_we
This is a common problem on the SX-210. I had two bad 4066 in two different voices...
2007-06-04 by claudio
... I m sorry, but - no. Well, I fixed it without schematics, it was one bad 4066 and one bad 4053 on the syn43 board. Thanks for your help :) best regs,
2007-05-31 by joeses_98
Does anyone have information on a specific model(s) of battery to use when replacing the battery in SX-210? How about some detailed instructions and helpful
2007-05-17 by gil_we
Hey, any news about this one ?.... ... on ... if, ... be ... Madrid. ... when i
2007-03-30 by gil_we
hey claudio, it still sounds to me like a battery leakage related problem... replace all components near the batter area and clean the board ! also, check
2007-03-28 by claudio
Thanks for your answer! ... Yes, all voices are affected. I am wondering, what kind of waveform should show on pin KCV on the sound board, I guess, a simple
2007-03-28 by gil_we
Just a note, I found two bad 4066 chips on mine so far, it looks as if they are prone to fail oftenly on that instrument. ... digitally ... noise ... section
2007-03-28 by gil_we
Does it happen on all voices ? Someone on the vintagesynthrepair group has just noted about a spanish company sending him the schematics for SX240, you might
2007-03-28 by claudio
Hello, I ve got a corrupt SX-210 synth, and it wasn t the battery leakage issue . Ok, battery is defective, too but seems, there s something wrong with the
2007-03-27 by rodrigo
Thanks for your help! ... manual, ... (Perhaps
2007-03-27 by joeses_98
Just in case anyone is interested... there is a free pdf download version of the SX-210 & SX-240 (and others) user manuals on the Kawai site, url:
2007-03-27 by gil_we
Create your own ! the factory setting sucks ....
2007-02-17 by rodrigo
i have a problem with my sx_210.I lost the factory settings.So .. can you tell me where find this?the keyboard come with a tape with this settings ? thanks
2006-12-16 by texhand
... digitalvibrance.com for sound sharing. I will attempt to upload some wave files there, fairly soon ; to see if it will work and let you know. I do not
2006-12-14 by c3dw
I uploaded the factory presets from synthmania.com as the previous owner had just replaced the battery. I think the presets are actually pretty good (or at
2006-12-04 by gil_we
I as well came across the buttons but not the caps... maybe having a broken SX just for parts could be a good idea... ... SX- ... alike