Yahoo Groups archive
Messages
Page 33 of 56 · 2770 messages matched
2007-09-23 by gabu_004
Hello Peter, I'm woundering how does the power distribution works in the NIN custom case and what type of power supply is being used... I mean I'm planning to build myself a roadcase/modular synth and I'm trying to avoid buying doepfer's bus board to reduce as much as possible th
2007-09-21 by (i think you can figure that out)
Just realized I had never posted a shot of the back of the unit which I now have. If you want to see what these guys look like under the hood, go to the Model 11 page and click on 'click here for picture' - P
2007-09-21 by (i think you can figure that out)
All - The Vactrols for the Model 11's finally arrived this morning! Only three weeks late... I will be taking Mon-Wed off, so final assembly and delivery of these units will begin the weekend after next - on the 28th. On a side note, we will be delivering VCOs to ANalogue Haven t
2007-09-20 by (i think you can figure that out)
The Miltons will begn showing up at the end of the year. - P --- In PLAN_B_analog_blog@yahoogroups.com, "Tino" wrote: > > hello > > i'm new to the group. > > i have a question regarding the Milton Sequencer. Are there any plans > to release that beast in the near future? > > gree
2007-09-20 by (i think you can figure that out)
All, Two new modules wil begin shipping in two weeks: 1) The Model 9 Mixer/Attenuator is the forth in a series of utility modules from Plan B. A truly modular, multi-tasking 5 in, 3 output mixer, it's balanced inputs are suited for either AC signals or DC control voltages, or bot
2007-09-20 by Tino
hello i'm new to the group. i have a question regarding the Milton Sequencer. Are there any plans to release that beast in the near future? greetings verstaerker
2007-09-17 by (i think you can figure that out)
shoulda waited a second or two before I posted that last one. - P
2007-09-17 by (i think you can figure that out)
Completely different animals. The Model 11 can get mean, no question about it. But it can also be 'normal' and when it is, it's a bandpass filter only, with all the signature timbres that earmark that configuration. I was aware of the fact when I touted the 11 as the answer to th
2007-09-17 by (i think you can figure that out)
As to why I have no clue. It's been this way for about 45 minutes. Will be phoning over to my ISP shortly, hopefully it's nothing life-threatening. - P
2007-09-17 by cray5656
Hi all How does the Evil Twin compare to say the Doepfer Xtreme? I have the Xtreme and its very aggressive harsh etc.
2007-09-17 by (i think you can figure that out)
We're shipping to France (Mesi) and Germany (Schnieder's B) next week. - P In PLAN_B_analog_blog@yahoogroups.com, "astroschnautzer" wrote: > > i understand that there is no plan b products available in europe at > the moment and nobody really knows if or when there is going to be
2007-09-16 by Bakis Sirros
ok, thanks Peter! many thanks, best regards, Bakis. --- "(i think you can figure that out)" wrote: > Our next delivery will consist of Model 11's, 13's > and 15's. Some time towards the end of > the week. then we've got M28's coming which should > be the week after. > > > - P > >
2007-09-16 by Ancient Eyeball Recipe
I’m trying to determine if mine is defective...I just got it on Friday. In lower third of the range the knob has rather stiff resistance, the middle third has virtually no resistance (and the effect on the sound is very glitchy when it is turned) and then in the upper third the r
2007-09-16 by astroschnautzer
i understand that there is no plan b products available in europe at the moment and nobody really knows if or when there is going to be some, perhaps peter or someone knows the answer for this? -Wille
2007-09-15 by (i think you can figure that out)
Our next delivery will consist of Model 11's, 13's and 15's. Some time towards the end of the week. then we've got M28's coming which should be the week after. - P --- In PLAN_B_analog_blog@yahoogroups.com, "boris" wrote: > > ??? me three...tap tap tap :-) > -Boris > > > > > ---
2007-09-14 by boris
??? me three...tap tap tap :-) -Boris --- In PLAN_B_analog_blog@yahoogroups.com, Bakis Sirros wrote: > > hello Peter, > > could you tell me when more Model 28's will be > available for purchase in the Analogue Haven store? > i am very interested in this module. > > best regards,
2007-09-13 by (i think you can figure that out)
After two years since the line was announced it was inevitable, and put it off as long as possible but due to circumstances beyond our control (namely ROHS) we've had to re-evaluate our pricing on the Plan B line and are making adjustments effectve October 15th, 2007. These adjus
2007-09-13 by (i think you can figure that out)
Are you trying .net or .com, because we're .net. - P --- In PLAN_B_analog_blog@yahoogroups.com, ehdyn81@... wrote: > > Is anyone else finding it difficult(impossible) to get to the Plan B site? > > On 9/13/07, (i think you can figure that out) > wrote: > > > > you get? > > > > an
2007-09-13 by (i think you can figure that out)
I'm trying to keep it under $200. - P --- In PLAN_B_analog_blog@yahoogroups.com, "gabu_004" wrote: > > ouah!... well how much will they be, so I can start save up and > reserve mine?? > > Thanks much > > g. > > --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure >
2007-09-13 by Bakis Sirros
hello Peter, could you tell me when more Model 28's will be available for purchase in the Analogue Haven store? i am very interested in this module. best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner http://www.parallel-
2007-09-13 by ehdyn81@gmail.com
Is anyone else finding it difficult(impossible) to get to the Plan B site? On 9/13/07, (i think you can figure that out) peter@buzzclick-music.com > wrote: you get? anyway, OK - from a jurt of my peers it's been decided (30 yes, 5 no) that you're OK with using a Behinger engine f
2007-09-13 by gabu_004
ouah!... well how much will they be, so I can start save up and reserve mine?? Thanks much g. --- In PLAN_B_analog_blog@yahoogroups.com, "(i think you can figure that out)" wrote: > > you get? > > anyway, OK - from a jurt of my peers it's been decided (30 yes, 5 no) that you're O
2007-09-13 by (i think you can figure that out)
you get? anyway, OK - from a jurt of my peers it's been decided (30 yes, 5 no) that you're OK with using a Behinger engine for the Model 27. cool. This is how I'd like to handle it: These will be somewhat limited addition. I don't see making more than 20-25 of these units. I'm go
2007-09-13 by (i think you can figure that out)
The vactrols used on the Model 11 are currently on backorder from Allied, but they are scheduled to arrive in the next day or two and then will ship to us immediately. They come form Texas - that's a thre day UPS delivery cycle. Allied is usually accurate on in these estimations,
2007-09-13 by (i think you can figure that out)
that spec was written when we were entertaiing our own algorythm. let me get back to you on this now that's going to the ber. engine --- In PLAN_B_analog_blog@yahoogroups.com, "rafe127" wrote: > > > Hi, > > A couple of questions about the upcoming (it is still upcoming right?) >
2007-09-13 by (i think you can figure that out)
You can feed it anything, well...not wall current or anything...but the clock input drives an internal buffer )NPN transistor that's only giving the microp 5 volt signals), and there's a diode inthere tha stps negative voltage form making it's way in there as well. You're covered
2007-09-12 by appliancide
What sort of gate/clock signals can the model 28 take without damage to anything inside? Would I need to attenuate the signal from a roland mc-202 or tr-606 before connecting it to the 28? Thanks, Paul
2007-09-12 by rafe127
Hi, A couple of questions about the upcoming (it is still upcoming right?) Model 27 Digital Delay... 1) How wide is the front panel? 2) Is the minimum delay time really 200ms? Thanks, Rafael
2007-09-11 by (i think you can figure that out)
--- In PLAN_B_analog_blog@yahoogroups.com, "Bryan E Cornell" wrote: > > Was the title "Secret Life of Semiconductors" meant to echo Peter Tompkins' book "The Secret Life of Plants?" Nah...I just liked the sound of it. I have a hard time naming things. I usually don't title pieces
2007-09-10 by (i think you can figure that out)
Analoglive! goes live Tickets are now available for Analoglive!, a live ensemble performance featuring analog synthesizers and acoustic instruments piloted by composers Gary Chang, Richard Devine, Nine Inch Nails' Alessandro Cortini, Peter Grenader and Chas Smith, with a rare US
2007-09-06 by amnesia
You lucky lucky Bastard, I love Peters stuff I have found on mp3, I am into the more experimental side of electronic music/early electronic music....so Peter if you would like to send a copy to Australia I would gladly pay for it :-) I could do you a swap of my last Cray CD relea
2007-09-06 by Bryan E Cornell
Was the title "Secret Life of Semiconductors" meant to echo Peter Tompkins' book "The Secret Life of Plants?" I gather this work caused a bit of a sensation in the mid-1970's. Weirdly some years ago I set up a talk at the Library of Congress with Jeff Bagato, a local musician and
2007-09-06 by (i think you can figure that out)
Guys, If you want to improve the chaos of the SMOOTH random output, so it plays more from the extreme high to low voltage range, do this: Run a cable from the STEPPED RANDOM OUTPUT into the SMOOTH VC MEAN INPUT. Smooth Random settings: MEAN and DEVIATION at full counter-clockwise
2007-09-06 by Eyesaw
Peter was quite generous and sent me a copy of this material. It is truly a magical and wonderous piece of electronica and is most highly recommended - Bill ----- Original Message ----- From: (i think you can figure that out) To: PLAN_B_analog_blog@yahoogroups.com Sent: Tuesday,
2007-09-06 by gabu_004
mmmm that,s interesting... I like how you seem to make custom stuff based on orders from customers, makes that whole thing like family type of atmosphere...you know what I mean? so yeah I can't wait to get a hand on the M11... so I can wreck my professors ears LOL (no no no, I'm
2007-09-04 by gabu_004
HAHAHAHA Montréal is such a small town when it comes to music!!!!!! Yeah indeed Mikael from Archambeault's synth section is playing synth (NordModular G2) in my band...Do you know him? We're trying actually to incorporate the Modular system live (to replace some pre-recorded seq)
2007-09-04 by osaiber
Hi, you can found the cliff (england) cl 1382 at farnell.com and the knobs are at mouser; pointer color white= 550-67005 pinter color gray= 550-67003 Best Regards, Oscar salas. --- In PLAN_B_analog_blog@yahoogroups.com, "Eyesaw" wrote: > > Thanks Peter - Congratulations on succes
2007-09-04 by Eyesaw
Thanks Peter - Congratulations on success in translating your imagination into the best synth modules available. I am nowhere close to your "Secret Life" but your gear is inching me along - Bill Longstreet ----- Original Message ----- From: (i think you can figure that out) To: P
2007-09-04 by (i think you can figure that out)
So people don't think I've got anything to hide, 'Seret Life' is in reference to the name of a album project I've been working on for eons, which has seen a bit of renewed interest this year from a couple of labels and probably would have been released if I'd get off my ass and c
2007-09-04 by Sylvain Delisle
So, if I'm correct you also happen to be in a band of some sort with a guy working in Archambault's synths section. Right? It's good to know at least one other eurorack modular user in the area. Easier if we ever feel the need to sell or trade modules. For the Model 12, it didn't
2007-09-03 by (i think you can figure that out)
The toggle switches can be found all over the place, any manufacturer you wish. I suggest you look at Mouser and browse through what they offer. The pushbutton switches at Mouser, they are NKK part number KB-15CKW01 - that's just the switch body, then you have to select the snap
2007-09-03 by dingfutzer
Peter - I am building custom panels and would like to use the Plan B hardware. The knobs have been discussed before. Could you please provide for the group, maker & model specifications for the PB 28 jacks, toggle & push button switches? Hope that's not a secret -Thanks, Bill
2007-09-01 by (i think you can figure that out)
All, A qty. of nine Model 15's will be delivered to Analogue Haven tomorrow, Sat. 9/1/07. They should be there around noon PST. - P
2007-09-01 by (i think you can figure that out)
That Triple LPG is actually the same circuit as the Rev. 1 Dual Timbral Gate. There have been some changes made to it since but it is different than the Buchla circuit in design, but extremely close sonically. The faceplates were made for John Frusciante, I had few left over and
2007-09-01 by gabu_004
hehehe effectivement let's switch to english sinon ça ne sera pas long avant d'être fiché comme étant des espions LOL!! Yeah I remember seeing the triple LPG on his system the first time I've got stuff from him last January and if I'm not wrong, triple LPG is some type of prototy
2007-08-31 by Sylvain Delisle
Eh oui, de ce cher Zoran! (back to english so that people can read!) I think that at least a few people started their modular setup with Zoran's sell out. At least it was my case. It happened just at the right moment: I decided that I was going to start a modular by buying a Doep
2007-08-31 by bellenger_a
Well, YEAAAAAHHH Peter your passion and enthousiasm is incredible and source of enthousiasm an passion on the other side too... and its always nice this way... so YEEEEAAAAAHHH... let's keep it up!!! Best, From cold Paris, Alexandre --- In PLAN_B_analog_blog@yahoogroups.com, "(i
2007-08-31 by gabu_004
Montréal!? Triple LPG??? L'aurais-tu acheté de Zoran? g. --- In PLAN_B_analog_blog@yahoogroups.com, "Sylvain Delisle" wrote: > > Wait for me, I'll jump in (Montreal too)! I've just made a nice space > between my Model 12 and my Triple LPG. > > Nice work Peter, lot's of character
2007-08-31 by Sylvain Delisle
Wait for me, I'll jump in (Montreal too)! I've just made a nice space between my Model 12 and my Triple LPG. Nice work Peter, lot's of character in it. -----Message d'origine----- De : PLAN_B_analog_blog@yahoogroups.com [mailto:PLAN_B_analog_blog@yahoogroups.com]De la part de gab
2007-08-30 by (i think you can figure that out)
Just noticed this is the second busiest month as far as email traffic on this list. Let's keep it up! These discussions have prompted some good product ideas. The upcoming Model 9 for instances is in direct response to an idea presented here. Of course full credit will be gven to