PLAN B analog blog

----- Original Message -----

From: (i think you can figure that out)

To: PLAN_B_analog_blog@yahoogroups.com

Sent: Monday, September 03, 2007 6:05 PM

Subject: [PLAN_B_analog_blog] Re: Plan B Hardware

The toggle switches can be found all over the place, any manufacturer
you wish. I suggest you look at Mouser and browse through what they offer.

The pushbutton switches at Mouser, they are NKK part number KB-15CKW01
- that's just the switch body, then you have to select the snap in
lens color and LED color is you care to illuminate it. all three
parts will cost you about $8. Do a Mouser Search and call them to
make sure you're selecting the right lens ad the right LED.

The Jacks are made by CLIFF. Part number CL1384 fr the PC Mount,
CL1362 for the solder tail type to hook wire through. God luck
finding them! CliffUSA are buggers and dont keep stock. You have to
buy many.

For the specifications for any of these - look at the manufactures
specs. They are downloadable. I don't want to mis-squote anything here.

hope this helps -

- P

--- In PLAN_B_analog_blog@yahoogroups.com, "dingfutzer"
wrote:
>
> Peter - I am building custom panels and would like to use the Plan B
> hardware. The knobs have been discussed before. Could you please provide
> for the group, maker & model specifications for the PB 28 jacks, toggle
> & push button switches? Hope that's not a secret -Thanks, Bill
>

avast! Antivirus: Inbound message clean.

Virus Database (VPS): 000772-0, 09/03/2007
Tested on: 9/3/2007 7:12:30 PM
avast! - copyright (c) 1988-2007 ALWIL Software.

avast! Antivirus: Outbound message clean.

Virus Database (VPS): 000772-2, 09/04/2007
Tested on: 9/4/2007 7:27:39 AM
avast! - copyright (c) 1988-2007 ALWIL Software.