Yahoo Groups archive
Thread
2007-08-30 by Scott Deyo
Hi Group, Thanks for the support on the last run! The new run has the following: MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO Oakley ADSR CGS Tube VCA Jurgen's Tau Pipe Phaser Should be done in 2-3 weeks. Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
2007-08-30 by loopcycle
I'm curious to see the panel layout for the tau pipe phaser. --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
> > Hi Group, > > Thanks for the support on the last run! > > The new run has the following: > MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO > Oakley ADSR > CGS Tube VCA > Jurgen's Tau Pipe Phaser > > Should be done in 2-3 weeks. > > Cheers, > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com >
2007-08-30 by Scott Deyo
That's on my PC at home, unless the 'ills have it handy; they designed it :) Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Aug 30, 2007, at 10:34 AM, loopcycle wrote: > I'm curious to see the panel layout for the tau pipe phaser. > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> > wrote: > > > > Hi Group, > > > > Thanks for the support on the last run! > > > > The new run has the following: > > MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO > > Oakley ADSR > > CGS Tube VCA > > Jurgen's Tau Pipe Phaser > > > > Should be done in 2-3 weeks. > > > > Cheers, > > Scott Deyo > > The Bridechamber > > contact@... > > www.bridechamber.com > > > > >
2007-08-30 by wjhall11
Now, now - the Jurgen Tau panel design was a group project. mrmike figured hugely in helping determine what features to include and so did Scott D and Jurgen lent his input too. Will and I drew it up and added a little thing here and there - well - we did somwhat more than that. You can see it here along with a description of the process of its design down the page a bit: http://www.dragonflyalley.com/jHTauPipeConstruction.htm Thanks (B & W)ill aka - the 'ills --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
> > That's on my PC at home, unless the 'ills have it handy; they designed > it :) > > Cheers, > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com > > > On Aug 30, 2007, at 10:34 AM, loopcycle wrote: > > > I'm curious to see the panel layout for the tau pipe phaser. > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> > > wrote: > > > > > > Hi Group, > > > > > > Thanks for the support on the last run! > > > > > > The new run has the following: > > > MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO > > > Oakley ADSR > > > CGS Tube VCA > > > Jurgen's Tau Pipe Phaser > > > > > > Should be done in 2-3 weeks. > > > > > > Cheers, > > > Scott Deyo > > > The Bridechamber > > > contact@ > > > www.bridechamber.com > > > > > > > > > >
2007-09-06 by clickmrmike
And the TLN-156 is....? --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
> > Hi Group, > > Thanks for the support on the last run! > > The new run has the following: > MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO > Oakley ADSR > CGS Tube VCA > Jurgen's Tau Pipe Phaser > > Should be done in 2-3 weeks. > > Cheers, > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com >
2007-09-06 by William Hall
2007-09-06 by Scott Deyo
I've got those in. I think I emailed the group. The problem is, they are made from .09" instead of .125", so I am selling them for only $20. Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Sep 5, 2007, at 10:24 PM, clickmrmike wrote: > And the TLN-156 is....? > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> > wrote: > > > > Hi Group, > > > > Thanks for the support on the last run! > > > > The new run has the following: > > MFOS: Dual VCA, LPF, SVF, ADSR and VCLFO > > Oakley ADSR > > CGS Tube VCA > > Jurgen's Tau Pipe Phaser > > > > Should be done in 2-3 weeks. > > > > Cheers, > > Scott Deyo > > The Bridechamber > > contact@... > > www.bridechamber.com > > > > >
2007-10-10 by Scott Deyo
Hello Guys! The panels will be done next week, so you pay for them anytime (then I can pay the fabricators :) The 1Us are $20 and the 2Us are $25, shipping is $8. I've been talking to MrMike, too, and you have all convinced me to go ahead and do the MOTM 120R and 320R. I'll be doing another run soon. Cheers, and thanks!!!! Scott Deyo The Bridechamber contact@bridechamber.com www.bridechamber.com
On Sep 6, 2007, at 12:57 AM, William Hall wrote: > Hey Scott! > > We're interested in these- > > (2) CGS Tube VCA > (1) Jurgen's Tau Pipe Phaser > > Any info on a MOTM 120R, 320R? It seems like stooge panels will be a > long time coming. > > BTW, how are things with the bakery / house husbanding / bridechamber? > > Bill and Will > >
2007-10-10 by Scott Deyo
Oh crap, that wasn't supposed to go to the group! I hate it when I do that!!!!!!! At least I didn't mention my rash in this one... So, yeah, panels are shipping next week -- CGS Tube VCA 1U Oakley ADSR/ VCA 1U MFOS ADSR 1U LPF, SVF, Dual VCA, VCLFO 2U Jurgen's Tau Pipe Phaser 2U Magic Smoke Mankato 2U 1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check the site for any odd parts you might need, add solder and watch your modular grow! Get 'em while they're hot! Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote: > Hello Guys! > > The panels will be done next week, so you pay for them anytime (then I > can pay the fabricators :) > The 1Us are $20 and the 2Us are $25, shipping is $8. > > I've been talking to MrMike, too, and you have all convinced me to go > ahead and do the MOTM 120R and 320R. I'll be doing another run soon. > > Cheers, and thanks!!!! > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com > > > On Sep 6, 2007, at 12:57 AM, William Hall wrote: > >> Hey Scott! >> >> We're interested in these- >> >> (2) CGS Tube VCA >> (1) Jurgen's Tau Pipe Phaser >> >> Any info on a MOTM 120R, 320R? It seems like stooge panels will be >> a long time coming. >> >> BTW, how are things with the bakery / house husbanding / >> bridechamber? >> >> Bill and Will >> >>
2007-10-10 by data2action
pics of the tau pipe phaser layout? b --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote: > > Oh crap, that wasn't supposed to go to the group! I hate it when I do > that!!!!!!! > > At least I didn't mention my rash in this one... > > So, yeah, panels are shipping next week -- > CGS Tube VCA 1U > Oakley ADSR/ VCA 1U > MFOS ADSR 1U > LPF, SVF, Dual VCA, VCLFO 2U > Jurgen's Tau Pipe Phaser 2U > Magic Smoke Mankato 2U > 1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check the > site for any odd parts you might need, add solder and watch your > modular grow! > > Get 'em while they're hot! > > Cheers, > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com > > > On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote: > > > Hello Guys! > > > > The panels will be done next week, so you pay for them anytime (then I > > can pay the fabricators :) > > The 1Us are $20 and the 2Us are $25, shipping is $8. > > > > I've been talking to MrMike, too, and you have all convinced me to go > > ahead and do the MOTM 120R and 320R. I'll be doing another run soon. > > > > Cheers, and thanks!!!! > > Scott Deyo > > The Bridechamber > > contact@... > > www.bridechamber.com > > > > > > On Sep 6, 2007, at 12:57 AM, William Hall wrote: > > > >> Hey Scott! > >> > >> We're interested in these- > >> > >> (2) CGS Tube VCA > >> (1) Jurgen's Tau Pipe Phaser > >> > >> Any info on a MOTM 120R, 320R? It seems like stooge panels will be
> >> a long time coming. > >> > >> BTW, how are things with the bakery / house husbanding / > >> bridechamber? > >> > >> Bill and Will > >> > >> >
2007-10-10 by Scott Deyo
You can see the virtual panel on the 'ills excellent site: http://www.dragonflyalley.com/jHTauPipeConstruction.htm Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Oct 10, 2007, at 10:41 AM, data2action wrote: > pics of the tau pipe phaser layout? > > b > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> > wrote: > > > > Oh crap, that wasn't supposed to go to the group! I hate it when I > do > > that!!!!!!! > > > > At least I didn't mention my rash in this one... > > > > So, yeah, panels are shipping next week -- > > CGS Tube VCA 1U > > Oakley ADSR/ VCA 1U > > MFOS ADSR 1U > > LPF, SVF, Dual VCA, VCLFO 2U > > Jurgen's Tau Pipe Phaser 2U > > Magic Smoke Mankato 2U > > 1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check > the > > site for any odd parts you might need, add solder and watch your > > modular grow! > > > > Get 'em while they're hot! > > > > Cheers, > > Scott Deyo > > The Bridechamber > > contact@... > > www.bridechamber.com > > > > > > On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote: > > > > > Hello Guys! > > > > > > The panels will be done next week, so you pay for them anytime > (then I > > > can pay the fabricators :) > > > The 1Us are $20 and the 2Us are $25, shipping is $8. > > > > > > I've been talking to MrMike, too, and you have all convinced me > to go > > > ahead and do the MOTM 120R and 320R. I'll be doing another run > soon. > > > > > > Cheers, and thanks!!!! > > > Scott Deyo > > > The Bridechamber > > > contact@... > > > www.bridechamber.com > > > > > > > > > On Sep 6, 2007, at 12:57 AM, William Hall wrote: > > > > > >> Hey Scott! > > >> > > >> We're interested in these- > > >> > > >> (2) CGS Tube VCA > > >> (1) Jurgen's Tau Pipe Phaser > > >> > > >> Any info on a MOTM 120R, 320R? It seems like stooge panels > will be > > >> a long time coming. > > >> > > >> BTW, how are things with the bakery / house husbanding / > > >> bridechamber? > > >> > > >> Bill and Will > > >> > > >> > > > > >
2007-10-10 by krisp
From: Scott DeyoCc: William HallSent: Wednesday, October 10, 2007 11:44 AMSubject: Re: [ModularSynthPanels] Re: new panels on wayOh crap, that wasn't supposed to go to the group! I hate it when I do that!!!!!!!
At least I didn't mention my rash in this one...
So, yeah, panels are shipping next week --
CGS Tube VCA 1U
Oakley ADSR/ VCA 1U
MFOS ADSR 1U
LPF, SVF, Dual VCA, VCLFO 2U
Jurgen's Tau Pipe Phaser 2U
Magic Smoke Mankato 2U
1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check the site for any odd parts you might need, add solder and watch your modular grow!
Get 'em while they're hot!
Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote:
Hello Guys!
The panels will be done next week, so you pay for them anytime (then I can pay the fabricators :)
The 1Us are $20 and the 2Us are $25, shipping is $8.
I've been talking to MrMike, too, and you have all convinced me to go ahead and do the MOTM 120R and 320R. I'll be doing another run soon.
Cheers, and thanks!!!!
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Sep 6, 2007, at 12:57 AM, William Hall wrote:
Hey Scott!
We're interested in these-
(2) CGS Tube VCA
(1) Jurgen's Tau Pipe Phaser
Any info on a MOTM 120R, 320R? It seems like stooge panels will be a long time coming.
BTW, how are things with the bakery / house husbanding / bridechamber?
Bill and Will
2007-10-10 by Scott Deyo
Hi Paul, Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion. Sorry to hear about the Oakley jacks -- it's been so long since I've done an Oakley, I didn't even know the jacks were on PCBs! Fancy! I'm not a house husband quite yet. I stay home w/ my 7 year-old stepdaughter when I can, but we hope to have a bairn next year. 2 months -- congratulations! Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
2007-10-10 by Scott Deyo
Doh! Twice in one day!? I guess I need an espresso, or maybe whiskey... Sorry, group! Sorry Paul! Scott Deyo The Bridechamber contact@...m www.bridechamber.com
On Oct 10, 2007, at 1:45 PM, Scott Deyo wrote: > Hi Paul, > > Here's the Mankato, though I added the degrees of phase at the last > moment. That text is vertical to the left of each of the output jacks, > w/ a little line to the jack so there's no confusion. > > Sorry to hear about the Oakley jacks -- it's been so long since I've > done an Oakley, I didn't even know the jacks were on PCBs! Fancy! > > I'm not a house husband quite yet. I stay home w/ my 7 year-old > stepdaughter when I can, but we hope to have a bairn next year. 2 > months -- congratulations! > > Cheers, > Scott Deyo > The Bridechamber > contact@... > www.bridechamber.com > <mankato.pdf> > > On Oct 10, 2007, at 11:05 AM, krisp wrote: > >> Hay Scott >> how's it going >> got the last lot of panels nice work had to bodge the Oakley panel >> but all went well in the end (the jack PCB doesn't quite fit the >> panel ) >> I'm looking to get 2 of your Jurgen's Tau Pipe Phaser panels also do >> you have a picture of the Magic Smoke Mankato 2U panel as I might >> have one or 2 of them as well >> cheers >> Paul >> >> PS how long you been a house husband ? >> I have been doing it for 2 months now and i'm loving it, >> got to go and get dinner ready or she will be mad LOL >> >> >> >> ----- Original Message ----- >>> From: Scott Deyo >>> To: ModularSynthPanels@yahoogroups.com >>> Cc: William Hall >>> Sent: Wednesday, October 10, 2007 11:44 AM >>> Subject: Re: [ModularSynthPanels] Re: new panels on way >>> >>> Oh crap, that wasn't supposed to go to the group! I hate it when I >>> do that!!!!!!! >>> >>> At least I didn't mention my rash in this one... >>> >>> So, yeah, panels are shipping next week -- >>> CGS Tube VCA 1U >>> Oakley ADSR/ VCA 1U >>> MFOS ADSR 1U >>> LPF, SVF, Dual VCA, VCLFO 2U >>> Jurgen's Tau Pipe Phaser 2U >>> Magic Smoke Mankato 2U >>> 1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check the >>> site for any odd parts you might need, add solder and watch your >>> modular grow! >>> >>> Get 'em while they're hot! >>> >>> Cheers, >>> Scott Deyo >>> The Bridechamber >>> contact@bridechamber.com >>> www.bridechamber.com >>> >>> >>> On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote: >>> >>>> Hello Guys! >>>> >>>> The panels will be done next week, so you pay for them anytime >>>> (then I can pay the fabricators :) >>>> The 1Us are $20 and the 2Us are $25, shipping is $8. >>>> >>>> I've been talking to MrMike, too, and you have all convinced me to >>>> go ahead and do the MOTM 120R and 320R. I'll be doing another run >>>> soon. >>>> >>>> Cheers, and thanks!!!! >>>> Scott Deyo >>>> The Bridechamber >>>> contact@... >>>> www.bridechamber.com >>>> >>>> >>>> On Sep 6, 2007, at 12:57 AM, William Hall wrote: >>>> >>>>> Hey Scott! >>>>> >>>>> We're interested in these- >>>>> >>>>> (2) CGS Tube VCA >>>>> (1) Jurgen's Tau Pipe Phaser >>>>> >>>>> Any info on a MOTM 120R, 320R? It seems like stooge panels will >>>>> be a long time coming. >>>>> >>>>> BTW, how are things with the bakery / house husbanding / >>>>> bridechamber? >>>>> >>>>> Bill and Will >> >>
2007-10-10 by krisp
----- Original Message -----
From: Scott DeyoSent: Wednesday, October 10, 2007 7:55 PMSubject: Re: [ModularSynthPanels] Re: new panels on wayDoh! Twice in one day!? I guess I need an espresso, or maybe whiskey...
Sorry, group! Sorry Paul!
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Oct 10, 2007, at 1:45 PM, Scott Deyo wrote:
Hi Paul,
Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion.
Sorry to hear about the Oakley jacks -- it's been so long since I've done an Oakley, I didn't even know the jacks were on PCBs! Fancy!
I'm not a house husband quite yet. I stay home w/ my 7 year-old stepdaughter when I can, but we hope to have a bairn next year. 2 months -- congratulations!
Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Oct 10, 2007, at 11:05 AM, krisp wrote:
Hay Scott
how's it going
got the last lot of panels nice work had to bodge the Oakley panel but all went well in the end (the jack PCB doesn't quite fit the panel )
I'm looking to get 2 of your Jurgen's Tau Pipe Phaser panels also do you have a picture of the Magic Smoke Mankato 2U panel as I might have one or 2 of them as well
cheers
Paul
PS how long you been a house husband ?
I have been doing it for 2 months now and i'm loving it,
got to go and get dinner ready or she will be mad LOL
----- Original Message -----
From: Scott Deyo
To: ModularSynthPanels@yahoogroups.com
Cc: William Hall
Sent: Wednesday, October 10, 2007 11:44 AM
Subject: Re: [ModularSynthPanels] Re: new panels on way
Oh crap, that wasn't supposed to go to the group! I hate it when I do that!!!!!!!
At least I didn't mention my rash in this one...
So, yeah, panels are shipping next week --
CGS Tube VCA 1U
Oakley ADSR/ VCA 1U
MFOS ADSR 1U
LPF, SVF, Dual VCA, VCLFO 2U
Jurgen's Tau Pipe Phaser 2U
Magic Smoke Mankato 2U
1Us are $20, 2Us are $25, brackets are $5, shipping is $8, check the site for any odd parts you might need, add solder and watch your modular grow!
Get 'em while they're hot!
Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Oct 10, 2007, at 5:29 AM, Scott Deyo wrote:
Hello Guys!
The panels will be done next week, so you pay for them anytime (then I can pay the fabricators :)
The 1Us are $20 and the 2Us are $25, shipping is $8.
I've been talking to MrMike, too, and you have all convinced me to go ahead and do the MOTM 120R and 320R. I'll be doing another run soon.
Cheers, and thanks!!!!
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com
On Sep 6, 2007, at 12:57 AM, William Hall wrote:
Hey Scott!
We're interested in these-
(2) CGS Tube VCA
(1) Jurgen's Tau Pipe Phaser
Any info on a MOTM 120R, 320R? It seems like stooge panels will be a long time coming.
BTW, how are things with the bakery / house husbanding / bridechamber?
Bill and Will
2007-10-10 by John Mahoney
Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion.
2007-10-10 by Scott Deyo
Intentional. To me it's easier to see than the -. I think I picked that up from Ken. Does anyone hate that? If so, please say now (though it's too late for designs I already did that way)! Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Oct 10, 2007, at 3:18 PM, John Mahoney wrote: > At 02:45 PM 10/10/2007, Scott Deyo wrote: > >> Here's the Mankato, though I added the degrees of phase at the last >> moment. That text is vertical to the left of each of the output >> jacks, w/ a little line to the jack so there's no confusion. > I'm seeing things like 6dB OUT (OUT with a bar over it) instead of > -6dB OUT. > > Intentional? Font weirdness? Design mistake? > > Aside from that it looks good! > -- > john > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.488 / Virus Database: 269.14.6/1061 - Release Date: > 10/10/2007 8:43 AM
2007-10-10 by Jason Proctor
in order to avoid confusion with signal level as opposed to polarity, why not have 6db out + and 6db out - ? looking around my synth that seems to be a standard of sorts... (the bar notation is more math than audio as such IMHO.) >Intentional. To me it's easier to see than the -. I think I picked >that up from Ken. Does anyone hate that? If so, please say now >(though it's too late for designs I already did that way)! -- Jase is doing the AIDS ride - to sponsor him visit http://www.aidslifecycle.org/1674
2007-10-10 by Scott K Warren
Intentional. To me it's easier to see than the -. I think I picked that up from Ken. Does anyone hate that? If so, please say now (though it's too late for designs I already did that way)!Scott DeyoThe Bridechamberwww.bridechamber.comOn Oct 10, 2007, at 3:18 PM, John Mahoney wrote:At 02:45 PM 10/10/2007, Scott Deyo wrote:Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion.I'm seeing things like 6dB OUT (OUT with a bar over it) instead of -6dB OUT.Intentional? Font weirdness? Design mistake?Aside from that it looks good!--john
2007-10-11 by Scott Deyo
Alrighty then. I'll call today and see if I can change it. I'm one of those that doesn't like + and - because half the time they're actually the opposite of what they're labeled ; ) Good luck on the AIDS ride, Jason! Cheers, Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Oct 10, 2007, at 3:48 PM, Jason Proctor wrote: > in order to avoid confusion with signal level as opposed to polarity, > why not have 6db out + and 6db out - ? looking around my synth that > seems to be a standard of sorts... > > (the bar notation is more math than audio as such IMHO.) > > >Intentional. To me it's easier to see than the -. I think I picked > >that up from Ken. Does anyone hate that? If so, please say now > >(though it's too late for designs I already did that way)! > > -- > Jase is doing the AIDS ride - to sponsor him visit > http://www.aidslifecycle.org/1674 > > >
2007-10-11 by contact@bridechamber.com
----- Original Message -----From: Scott K WarrenSent: Wednesday, October 10, 2007 5:52 PMSubject: Re: [ModularSynthPanels] Re: new panels on wayI hate that.
On Oct 10, 2007, at 3:43 PM, Scott Deyo wrote:
Intentional. To me it's easier to see than the -. I think I picked that up from Ken. Does anyone hate that? If so, please say now (though it's too late for designs I already did that way)!Scott DeyoThe BridechamberOn Oct 10, 2007, at 3:18 PM, John Mahoney wrote:At 02:45 PM 10/10/2007, Scott Deyo wrote:Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion.I'm seeing things like 6dB OUT (OUT with a bar over it) instead of -6dB OUT.Intentional? Font weirdness? Design mistake?Aside from that it looks good!--john
2007-10-12 by Scott K Warren
Don't hold back, Scott. Tell me how you really feel.; pI sent the revised art to the 'screeners. The panels are now labeled (for example) 6 dB OUT and - 6 dB OUT.Dead Alive sure is a great movie!Scott----- Original Message -----From: Scott K WarrenSent: Wednesday, October 10, 2007 5:52 PMSubject: Re: [ModularSynthPanels] Re: new panels on wayI hate that.
On Oct 10, 2007, at 3:43 PM, Scott Deyo wrote:
Intentional. To me it's easier to see than the -. I think I picked that up from Ken. Does anyone hate that? If so, please say now (though it's too late for designs I already did that way)!Scott DeyoThe BridechamberOn Oct 10, 2007, at 3:18 PM, John Mahoney wrote:At 02:45 PM 10/10/2007, Scott Deyo wrote:Here's the Mankato, though I added the degrees of phase at the last moment. That text is vertical to the left of each of the output jacks, w/ a little line to the jack so there's no confusion.I'm seeing things like 6dB OUT (OUT with a bar over it) instead of -6dB OUT.Intentional? Font weirdness? Design mistake?Aside from that it looks good!--john
2007-10-12 by Scott Deyo
I _did_ ask : ) And no worries, I'm pretty thick-skinned. I'm married! Scott Deyo The Bridechamber contact@... www.bridechamber.com
On Oct 12, 2007, at 12:42 AM, Scott K Warren wrote: > I didn't mean to be rude, but, well, you did write "if anyone hates > that, please say so now"! > > I'm glad you were able to make the change -- I will be ordering a > couple when they come in. > > skw > > > On Oct 11, 2007, at 6:44 PM, <contact@...> > <contact@...> wrote: > >> Don't hold back, Scott. Tell me how you really feel. >> >> ; p >> >> I sent the revised art to the 'screeners. The panels are now labeled >> (for example) 6 dB OUT and - 6 dB OUT. >> >> Dead Alive sure is a great movie! >> Scott >> >> >>> ----- Original Message ----- >>> From: Scott K Warren >>> To: ModularSynthPanels@yahoogroups.com >>> Sent: Wednesday, October 10, 2007 5:52 PM >>> Subject: Re: [ModularSynthPanels] Re: new panels on way >>> >>> >>> I hate that. >>> >>> >>> On Oct 10, 2007, at 3:43 PM, Scott Deyo wrote: >>> >>>> Intentional. To me it's easier to see than the -. I think I picked >>>> that up from Ken. Does anyone hate that? If so, please say now >>>> (though it's too late for designs I already did that way)! >>>> >>>> >>>> Scott Deyo >>>> The Bridechamber >>>> contact@... >>>> >>>> www.bridechamber.com >>>> >>>> >>>> >>>> On Oct 10, 2007, at 3:18 PM, John Mahoney wrote: >>>> >>>>> At 02:45 PM 10/10/2007, Scott Deyo wrote: >>>>> >>>>>> Here's the Mankato, though I added the degrees of phase at the >>>>>> last moment. That text is vertical to the left of each of the >>>>>> output jacks, w/ a little line to the jack so there's no >>>>>> confusion. I'm seeing things like 6dB OUT (OUT with a bar over >>>>>> it) instead of -6dB OUT. >>>>> >>>>> Intentional? Font weirdness? Design mistake? >>>>> >>>>> Aside from that it looks good! >>>>> -- >>>>> john >>> >> > >