Yahoo Groups archive
Messages
Page 18 of 2186 · 109257 messages matched
2016-03-25 by Paul Roark
WJ1082 is the product designation for the former Image Specialists ink that MIS sells as Eboni MK. STS Inks acquired Image Specialists and continues to
2016-03-25 by Paul Roark
This is just a little refresher regarding longevity. It s a table from my Eboni-6 PDF that is based on Aardenberg-Imaging data: *Delta-e at 60 Mlux-hrs Light
2016-03-25 by Myron Gochnauer
WJ1082 is the generic for Eboni. Just search for that anywhere. I buy it from www.printerfillingstation.com . Andrew I’m
2016-03-25 by Mark Savoia
Ditto! Mark stillrivereditions.com
2016-03-25 by Elliot Puritz
Hi Dan: The logical alternative: The Piezography System from Jon Cone. The inks are reliable, the service is exemplary, the profiles are excellent, the
2016-03-25 by azarijah@...
Hello. I ve looked at many of the emails on this subject. I ll add my little tidbit, and hopefully you can draw a little bit of comfort from it. I came upon
2016-03-25 by photo@...
So after four emails to MIS asking them to cancel my order and ten hours after my first post here, MIS suddenly sends me an email that my order was shipped.
2016-03-25 by dacorbell@...
thank you Andrew-just ordered some...
2016-03-25 by asharpe@...
WJ1082 is the generic for Eboni. Just search for that anywhere. I buy it from www.printerfillingstation.com. Andrew On Thu, March 24, 2016 4:58 pm,
2016-03-24 by dacorbell@...
I am happy with what I ve got. Can I buy a liter of Eboni 1.1 from STS?
2016-03-24 by Paul Roark
FWIW -- I m not worried about a path forward. Hopefully MIS is doing fine, but there are a lot of options. Like everyone else, I try to use the best (lots
2016-03-24 by andrey@...
There are still the Piezography inks. They cost more, but they are a dedicated carbon B&W ink with various toning options, and what look like turn-key
2016-03-24 by photo@...
Paul Thanks for your insight (as always) and I know you have a long history with them. However, I run a small business myself and paying attention to my
2016-03-24 by Paul Roark
What I hear from MIS is that there were 3 Eboni backorders. Hopefully they are being taken care of quickly and the individuals will be contacted. It s a small
2016-03-24 by Jacques Caron
Hi Never had a problem with them but… I m glad that I ordered a pint of K ink plus the base needed to feed my 1430. I m in Canada and, aside that fact that
2016-03-24 by filmboard2001@...
I ve had the same problem. I ve now been waiting for nearly two months with no status change to my order online. Finally, a couple of weeks ago, in frustration
2016-03-24 by a3rm
Same here, ordered weeks ago, paid, no shipment, getting concerned. best, Alex On 2016-03-24 11:12 AM, photo@danderby.com ... This email has been checked for
2016-03-24 by photo@...
Sounds crazy, I know but I ordered a b&w ink kit from MIS via their webpage several weeks ago. I confirmed that they charged our Visa. However, their online
2016-03-23 by John Castronovo
Good luck Ben. Anyone have an idea what a 10600 is worth that’s in perfect working order? The 10600 was (is) a beast of a machine, very rugged. I’d think
2016-03-22 by benjschneider2@...
I have a good, currently working 7600 for sale; $500. I am down sizing and do not need a 7600 and a 9600 anymore.
2016-03-22 by andrey@...
Hi Paul, No problem. Right now, the yellow position has the lightest dilution of the Eboni-6 ink. The .qidf profile I ve made tells QTR to only use the 5 ink
2016-03-22 by paulmwhiting@...
Hello again, Andre, I ve had some time to study your response more carefully, your thorough answer merits more attention! I m still a bit confused as to the
2016-03-21 by Paul Roark
The problems you described in the first half of your paragraph made me think damper, and, as you found, they are relatively easy to change in that model.
2016-03-21 by havocagp@...
I don t know if I am in the right place. So please direct me to the right area if anyone knows where I should go about this problem. I have a Epson Stylus Pro
2016-03-20 by ganb@...
Thanks Paul. I have one I m going to convert to the Carbon ink set. -Gan
2016-03-20 by Paul Roark
I doubt anyone would be able to see any difference. Paul www.PaulRoark.com On Sat, Mar 19, 2016 at 7:58 PM, ganb@verizon.net [DigitalBlackandWhiteThePrint]
2016-03-20 by ganb@...
Can anyone speak to the quality of the print a 7600 will produce with Paul s C6 VT inkset, say, compared to the 3880?
2016-03-18 by paulmwhiting@...
Thanks, Andre... I m a little late too! Paul
2016-03-16 by rdeloe1@...
This has been an immensely helpful thread. Thanks to everyone who responded to the question I posed. What s been especially revealing for me, and hopefully for
2016-03-16 by Mark Savoia
There is an automator script someplace for the Macs that sort of does the same thing. Think it is called “automator purge print”. Mark
2016-03-16 by Jacques Caron
Hi Unfortunately this a Win-based only software; for Mac users, they have to rely on a different solution. Many tricks have been posted but the humidity
2016-03-16 by Michael-K
Without the slightest hesitation I recommend the use of the software program Harvey Head Cleaner (http://harveyheadcleaner.com) with which I have no
2016-03-16 by andrey@...
FWIW, I placed an order for the Eboni-6 starter kit on February 4, and they shipped it the following week after 1 email inquiry about its status. --Andre
2016-03-16 by jeff.grant@...
Got it, thanks.
2016-03-16 by forums@walkerblackwell.com
Sorry. Huge caveat was to read through it. That the thread was long. Maybe not huge caveat . . . . cheers, W
2016-03-16 by jeff.grant@...
Walker, as the person who started the IJM thread, I hesitated to refer to it initially but then decided that it would probably add to the knowledge pool. When
2016-03-16 by Michael Angle
Methink the situation is more precarious than your inkheads I also have been trying unsuccessfully to make a purchase and contact the for at least a month. I
2016-03-16 by forums@walkerblackwell.com
One huge caveat to reading this thread listed below. There is a TON of information. Think of it as a totally raw un-whitebalanced everything goes historical
2016-03-16 by jeff.grant@...
A long read on sedimentation issues with a 3880: Swapping inks and dealing with the residual in the lines
2016-03-16 by jeff.grant@...
Paul, Eboni may be different to Cone PZ inks. What I found was that pigment settles in the lines and no amount of shaking is going to fix that. I rely on my
2016-03-16 by Philip Lindsay
Keith is right - not a good idea!! Buy a 3880 instead but do run weekly nozzle checks On Tuesday, March 15, 2016 2:26 PM, rdeloe1@rogers.com
2016-03-16 by Paul Roark
Jim, Was that v. 1? I have my printers inside in an environment that is relatively stable. Perhaps the 7800 generation also has a better capping station
2016-03-16 by Paul Roark
It s been a long time since I used a 7600, but just looking at the issue of ink maintenance, I think if you agitated the carts, did a nozzle check, and printed
2016-03-16 by ajv@...
Having a 7600 that sits is not good. You should be using it at least weekly, if not every few days. If you were going to print once a month or less, I would
2016-03-15 by brian_downunda@...
Jeff is right. Keith Cooper s page on owning a large format printer presumably assumes about OEM inks which are slow to sediment. Although the alternative
2016-03-15 by dwight_talley@...
I have owned two 7600 and currently have a 9600. I set one of the 7600 for color printing and had Eboni inks in the other 7600. The problem I had with these
2016-03-15 by jeff.grant@...
Any printer with ink lines, non-Epson inks and low usage is going to suffer from sedimentation in the lines. You can shake the carts but what s in the lines
2016-03-15 by rdeloe1@...
I’m looking for some advice from people who have experience with the Epson 7600 or 9600. I have an opportunity to buy an Epson 7600 (Ultrachrome version)
2016-03-15 by andrey@...
HI Paul, Sorry for the late response ... Hang in there! The learning curve is steep but it doesn t last too long. Yes, I am making my own profiles. Partly
2016-03-14 by filmboard2001@...
Just a warning. Inksupply.com has had my re-order for Eboni black and warm tone Ultratone ink cartridges since Feburary 5 and has not shipped, nor have they