Modular Synth Panels group photo

Yahoo Groups archive

Modular Synth Panels

Index last updated: 2026-04-03 21:43 UTC

Messages

Browse messages

Page 27 of 66 · 3299 messages matched

Re: Superladder Panels

2009-03-11 by krelnarb

Scott, I over looked this! Is the door closed? Also, is there a difference in panel functions between a Moog and Roland version? I have a Rev.2 Superladder

Thread view Attachments: 0

Quantix Panel Ideas

2009-03-11 by Scott Deyo

Hi All, What are y all thinkin about the Quantix? I m thinking of building it w/ the following changes: No trim hole ; if it warrants a hole, how about just

Thread view Attachments: 0

Re: cabby

2009-03-08 by stevemodularland

These guys make very inexpensive, lightweight cases that can be only 8 deep so fit a modular nicely... http://www.tuffboxcases.com/ They are custom built, so

Thread view Attachments: 0

Got the tempcos -

2009-03-04 by William Hall

Thanks, Scott. Question - just for our info and to put on our site, what are the last two bands on the resistors? Obviously the first three are values - brown

Thread view Attachments: 0

Superladder Panels

2009-03-03 by Scott Deyo

Hi all, I m doing a single run of panels for the old 3U Oakley Superladder, the one that could be built either as a diode or transistor ladder. If anyone wants

Thread view Attachments: 0

Re: Black finish scrws

2009-03-03 by dunna13

Thanks for the replies. I have gone with black japaned scres because my local hardware store has them. Cheers, Al

Thread view Attachments: 0

Re: Black finish scrws

2009-02-27 by Clive

Hi Al, The finish you want is called Black Japan , it s a hard finish that doesn t come off when you use your screwdriver. I bought some cheapies to start

Thread view Attachments: 0

DDVCO & TZFM VCO

2009-02-26 by James Elliott

Scott, do you have any updates on the DDVCO? Also, I understand that Ian Fritz sent you the gerber files for his Thru Zero FM VCO. What s the word on those?

Thread view Attachments: 0

New file uploaded to ModularSynthPanels

2009-02-26 by ModularSynthPanels@yahoogroups.com

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :

Thread view Attachments: 0

Black finish scrws

2009-02-26 by dunna13

Does anyone know where to get black finish wood screws and/or machine screws? I have built my first cabinet and designed my first front panels (for MFOS

Thread view Attachments: 0

Re: [ModularSynthPanels] cabby

2009-02-26 by Ti_

Oh yea, forgot about those! Bridechamber makes em http://www.bridechamber.com/bridechamber.com/Cab%20Mounting.html ________________________________ From:

Thread view Attachments: 0

Re: [ModularSynthPanels] cabby

2009-02-26 by Richard Brewster

Here s one way to do it in rack mount, but you have to deal with the power supply: http://pugix.com/synth/portable-rack-cabinets/ Richard Brewster

Thread view Attachments: 0

Re: [ModularSynthPanels] cabby

2009-02-26 by Richard Brewster

I used dot com cabinets. http://pugix.com/synth/synthesizerscom-motm-cabinet/ The key part is the special Stooge rails. I don t know if anyone makes these

Thread view Attachments: 0

Re: [ModularSynthPanels] cabby

2009-02-26 by Ti_

height wise, yeah, Dotcom and MOTM are the same...but the mounting hole spacing is different and you d need to tap your own holes for MOTM modules in a Dotcom

Thread view Attachments: 0

RE: [ModularSynthPanels] cabby

2009-02-26 by John Mahoney

... Not all that well, really. The MOTM mounting holes are a slightly further from the top/bottom edges than those of Moog and dotcom modules, so the mounting

Thread view Attachments: 0

RE: [ModularSynthPanels] cabby

2009-02-26 by David Ingebretsen

Do the synthesizers.com cabinets fit the MOTM format? I thought they did. David David M. Ingebretsen M.S., M.E. Collision Forensics & Engineering, Inc. 2469

Thread view Attachments: 0

Re: [ModularSynthPanels] cabby

2009-02-26 by Paul Lord

David at nice-racks.com can build you a stained/finished pine cabinet of arbitrary dimensions with metal mounting rails, no problem. Contact him for a custom

Thread view Attachments: 0

cabby

2009-02-26 by devin

hello everyone! so im finally ready to get crackin on my long delayed motm format modular, and im wondering if anyone has suggestions on where to get a cabinet

Thread view Attachments: 0

New file uploaded to ModularSynthPanels

2009-02-22 by ModularSynthPanels@yahoogroups.com

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :

Thread view Attachments: 0

tolerances and FracRack module width

2009-02-22 by David Ingebretsen

I have a couple of questions about tolerances on FracRack panels I want to send to Schafer. 1. What tolerance is typically specified for width, holes,

Thread view Attachments: 0

Opening FPD files

2009-02-18 by klostpret

Hi there! I got FrontPanelDesigner working with Wine on Linux (as Schaeffer suggests), and it works great when designing panels. But when I download a panel

Thread view Attachments: 0

more parts help ot

2009-02-11 by adaaxs

Anybody got a pair of LM328 6v9 precision voltage semis. I am putting an ASM2 together and have most of the special parts except the 328 and the 100ppm 62r

Thread view Attachments: 0

OA 91 ger diode

2009-02-11 by adaaxs

Hi Friends OA 91 germanium diode. MY ASM2 calls for one. (the pbc is amazing quality, veber seen better) What can I get in the US for a sub ? Is there a

Thread view Attachments: 0

paging tobias schilly...

2009-02-11 by Scott Deyo

Hi Tobias, It seems your server is full and my email won t go through. I just didn t want you to think I was ignoring you! Cheers, Scott Deyo The Bridechamber

Thread view Attachments: 0

Frac-MOTM adaptor panels posted

2009-02-11 by sduck409

Ok, as requested I whipped these up this evening - took maybe 1/2 hour. These are based on the panels I have that I got from Blacet directly, and the

Thread view Attachments: 0

Re: FPD for Blacet -> MOTM adapter

2009-02-10 by sduck409

That d be no problem to put together - I was meaning to do some fpd stuff this evening - I ll see if I can get one together. And I have 2 of the ones that

Thread view Attachments: 0

FPD for Blacet -> MOTM adapter

2009-02-09 by stevemodularland

Does anyone have an FPD for an MOTM panel that has a rectangular cutout/screw taps for mounting a Blacet module? I figure it would be cheap to make even in

Thread view Attachments: 0

Re: FS Wogglebug

2009-02-09 by stevemodularland

all that discussion was pointless because my ebay scanner picked it up and I BOUGHT IT IMMEDIATELY! HA!

Thread view Attachments: 0

RE: [ModularSynthPanels] FS Wogglebug

2009-02-09 by John L Rice

I put an asterisk after it like this - woggle* - in a search and got this: http://cgi.ebay.com/Grant-Richter-Wogglebug-Synth-Module-MOTM-Format_W0QQite

Thread view Attachments: 0

FS Wogglebug

2009-02-09 by babysealclub

I ve been trying to list this all day. Ebay thinks woggle means Google Checkout . I m on the line with them right now. if someone is interested let me

Thread view Attachments: 0

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.