Matching Transistors
2009-03-18 by wjhall11
Will and I are contemplating building the YUSynth diode filter. The PCB that Scott has for this at Bridechamber is the separate transistor version... and we
Messages
Browse messages
Page 26 of 66 · 3299 messages matched
Re: Pot hole sizes - a neat trick for mounting Alpha pots
2009-03-18 by clickmrmike
God Bless Larry! I ve been looking for a simple solution to the pot bushing problem for some time - I ve done tricks with epoxy, brass split rings, thin
Bride Chamber KLEE BOM updated
2009-03-18 by stevemodularland
Check out the files section under Klee Rotary. I m using Bride Chamber s mini alnico knobs and switchcraft knockoff jacks on this one.. I ve selected some
New file uploaded to ModularSynthPanels
2009-03-18 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Pot hole sizes - a neat trick for mounting Alpha pots
2009-03-17 by Richard Brewster
Standard pot and jack holes are 0.3750 (3/8) inches in diameter (9.53 mm). What if some people want to use large bushing pots and others want small bushing
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Bill Ganger
I m in for a Klee panel. I would prefer the holes for the small Alpha pots and 3.5 mm jacks. Bill Ganger ... From: Scott Deyo
RE: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by JAMES GALLANT
OK, I d be up for a pair of KLEE panels. I prefer large 1/4-inch format but I could live with the 3.5mm if need be. Although TW s MFOS panel is one of the
Re: Klee and MFOS sequencer
2009-03-17 by clickmrmike
Given that I ve been bugging you about this for a year, yes, I ll take a Klee panel. And a CVS panel. And two Quantix panels. And....and.... and I d better
Re: Klee and MFOS sequencer
2009-03-17 by willodotcom
second that - I d like one of each also!
Re: Klee and MFOS sequencer
2009-03-17 by data2action
one of each for me. and another vote for smaller holes... easier to drill out a hole that s too small than it is to shrink one that s too big. b
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Deyo
Did you get a .pdf of the design, Thomas? Maybe it s in your spam folder. I sent it late Sunday night. Cheers, Scott Deyo The Bridechamber
Re: Klee and MFOS sequencer
2009-03-17 by krelnarb
Off topic, but if you need a show of hands for a panel count I ll be getting a CVS panel also.
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by thomas white
Don t forget about thickness of the paint that is applied after the hole punching/drilling. Might add to that measurement more than anticipated. I use Alpha
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by thomas white
Yes, it is only about 7 spaces. I am exaggerating. Still bigger than many other modules ever created in MOTM format. When Scott posts an image we ll get a
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Andrew Listmayer
Seriously? I thought it was going to be 7U wide. I might have to back out, or at least think hard about it first.
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by loopcycle
ok, lets just say i was kidding about the 3.5mm jacks and skip the beatings ;) i just measured my alpha pot with my handy-dandy digital caliper...im measuring
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by thomas white
An absolute fair price (when you can t get a man down to just 5 bucks). The MFOS panel was also VERY expensive from FPE, but it has been a most welcome
Re: Klee and MFOS sequencer
2009-03-17 by krelnarb
I ll be getting Klee and MFOS swirly seq panels from you, one of each please. Do we need to preorder/deposit? Thank you,
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by thomas white
An absolute fair price (when you can t get a man down to just 5 bucks). The MFOS panel was also VERY expensive from FPE, but it has been a most welcome
Re: [ModularSynthPanels] Re: Klee and MFOS sequencer
2009-03-17 by thomas white
Ditto. I am waiting for the Klee and may get another MFOS for framing on the wall (JK) Thomas White Natural Rhythm www.naturalrhythmmusic.com ... From: klstay
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by thomas white
Sounds exciting. The day is finally near. Let s see it (or them)! Thomas White Natural Rhythm www.naturalrhythmmusic.com
Re: [ModularSynthPanels] Re: Klee and MFOS sequencer
2009-03-17 by Andrew Listmayer
Warning: The opinions expressed in the following post belong to the individual poster(who can be reached for flogging at 123 fake street) and do not
Re: Klee and MFOS sequencer
2009-03-17 by stevemodularland
I ve already paid for my KLEE :-) And with regards to format- all holes for jacks / pots / LEDs should confirm to MOTM standards... I will join in the beating
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Deyo
oh, no, i don t think so yet. i have one 98% done if Thomas doesn t hate my (necessary, i swear) changes, and if OK d i ll post it on the site and/ or group.
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Juskiw
Oops, I meant is there an image of the Klee panel somewhere?
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Deyo
http://www.naturalrhythmmusic.com/mfos.html at the bottom Scott Deyo The Bridechamber contact@bridechamber.com http://www.bridechamber.com Jealous Edison
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Juskiw
Can someone please post a jpg or gif of this panel (for those who can t read FPE files)? Thank you.
Re: [ModularSynthPanels] Re: Klee and MFOS sequencer
2009-03-17 by Scott Deyo
Oh, and another thought -- the knobs on this module will be small (sorry, but otherwise it would be 8U and not laid out so nice), and the 16mm you get from
Re: Klee and MFOS sequencer
2009-03-17 by wjhall11
So far as Will and I are concerned, the smaller holes are just fine (assuming they d be in the same spot as the larger holes)- we ll drill them out no prob.
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by Scott Deyo
sure and sure. what is the diameter for those 16mm, anyway? if folks need bigger it would be easy to drill them bigger, eh? the jacks... i think most people
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-17 by eric f
... collection.)
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Ben Stuyts
... Not for me, regular pots and jacks please! Ben
Re: Klee and MFOS sequencer
2009-03-16 by klstay
Put me down for 1 Klee. (I have the PCBs and parts kit just waiting for this panel run.)
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Andrew Listmayer
I m in for both and if it matters, I vote for holes for smaller alpha pots and regular 5mm LEDs that can easily be drilled/reamed out to accommodate
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by loopcycle
ok, looked quickly at the design and it looks badass. i would most likely pick up a panel. one criticism though--if you re going to do the electro music dot
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Paul Lord
The Thomas White rotary design is in teh top level directory of the Files section for this group, and yes, the FPE is almost 3x what Scott is proposing. That
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Scott Deyo
I m thinking $80-$100. The FPE is nearly $300!!!!!!! There s a WTF for ya, huh? Scott Deyo The Bridechamber contact@bridechamber.com
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by loopcycle
id like to see the final design too, and get a rough idea of the cost of the klee panel. i have a second kit sitting around and id prefer to have a nice panel
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Scott Deyo
I ll be posting the design this week, hopefully. Panel parts shouldn t be bad. Wiring... lots of fun! Scott Deyo The Bridechamber contact@bridechamber.com
Re: Klee and MFOS sequencer
2009-03-16 by wjhall11
Will and I are going to want one of each. Bill
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Ron Pool
I might be in for two Klee panels if panel parts are easy to source. Where can I see what Thomas White s Klee layout looks like? ... -- Ron Pool
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Jason Proctor
i think you should relate what happened with the first one :-)
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Paul Lord
I m in for a Klee. Yes, building a second one :) Paul
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Ben Stuyts
Hi Scott, ... I m in for the Klee panel. Can you give a price guestimate on these panels? Maybe I ll order an MFOS just in case... As usual, thanks for making
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by Ross Stapf
I plan to do one or the other. The Klee is more likely assuming another board run which I have been watching for. There is a small chance I will do both.
Re: [ModularSynthPanels] Klee and MFOS sequencer
2009-03-16 by David Moylan
I m in for the Klee panel for sure. I have the PCB and parts kit so need it to complete the package. Thanks. Dave
Re: Klee and MFOS sequencer
2009-03-16 by wjhall11
Scott - how much will they be? Bill (and Will)
Klee and MFOS sequencer
2009-03-16 by Scott Deyo
So the Klee and MFOS seq s are finally nearing their day. My conundrum: I don t want to order 50 expensive panels and sell 10. So... How many folks are in for
Re: [ModularSynthPanels] Re: DDVCO
2009-03-13 by Scott Deyo
Still waiting on the $#%#$%#$ screws. They should be here next week. I m frustrated, too. I have a ton of kits ready to ship, taking up sparse room, waiting on
Re: [ModularSynthPanels] Re: DDVCO
2009-03-12 by James Elliott
It s been a while since the last update, any news? -Jim ... From: Scott Deyo To: ModularSynthPanels@yahoogroups.com Sent: Thursday,