Modular Synth Panels

height wise, yeah, Dotcom and MOTM are the same...but the mounting hole spacing is different and you'd need to tap your own holes for MOTM modules in a Dotcom cabinet so as not to split the rails.  However, if pristine looks aren't particularly a necessity, you could buy a  cheap circular saw, a cheap drill and some wood planks from a hardware store and make one for half the price of a fancy finished professionally made one.  Plus ane extra cabinets would be cheaper once you have a few basic tools.

Orrr... both MOTM and Synthesizers.com offer standard rack mount rails so you can by any rack mount case and put them in that all nice and sturdy.
~Ti_




________________________________
From: David Ingebretsen <dingebre@...>
To: ModularSynthPanels@yahoogroups.com
Sent: Wednesday, February 25, 2009 8:07:04 PM
Subject: RE: [ModularSynthPanels] cabby


Do the synthesizers. com cabinets fit the MOTM format? I thought
they did.
 
David 
 
David M. Ingebretsen M.S., M.E.
Collision Forensics & Engineering, Inc.
2469 East Fort Union Blvd. STE 114
Salt Lake City, UT 84121
www.CFandE.com
 
801 733-5458 Office
801 842-5451 Cell
 
dingebre@CFandE. com
dingebre@3dphysics. net
 
 
 
From:ModularSynthPanels@ yahoogroups. com
[mailto:ModularSynt hPanels@yahoogro ups.com] On Behalf Of devin 
Sent: Wednesday, February 25, 2009 6:49 PM
To: ModularSynthPanels@ yahoogroups. com
Subject: [ModularSynthPanels ] cabby
 

hello everyone!

so im finally ready to get crackin on my long delayed motm format
modular, and im wondering if anyone has suggestions on where to get a
cabinet for my modules?
i checked out the site for cabinets linked to off of bridechamber, but
if you try to add one to cart it says they don't have any. and so far
web searches have turned up little.
ideally i would build something myself, but i don't have access to
wood tools. 
sorry if this isn't exactly on topic for this list, but this is where
i hang ;)
any advice is appreciated!

thanks!!

devin

www.clavitronics. com