Modular Synth Panels

Oh, and another thought -- the knobs on this module will be small 
(sorry, but otherwise it would be 8U and not laid out so nice), and the 
16mm you get from Mouser have a bit longer shaft. They're nice for big 
knobs, but not so much for small knobs.
But again, you can drill them out easily enough. An English step-drill? 
You mean you step on it?
; )
I don't know what that is, but if it's a drill it should work.

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com


On Mar 16, 2009, at 10:22 PM, wjhall11 wrote:

> So far as Will and I are concerned, the smaller holes are just fine 
> (assuming they'd be in the same spot as the larger holes)- we'll drill 
> them out no prob. But I'll warrant that you, Scott, would probably be 
> willing to drill them out for someone who needs the service for a few 
> bucks, right? So it's not like someone really needs to have a 
> drill-press and step-drill to have a usable panel with the larger 
> holes... you could do it for anyone who would rather pay a couple 
> extra for it than drill for themselves.
>
>  A thought, tho - will our English step-drill neatly fit into metric 
> holes to enlarge them? Hmmmm....
>
>  Bill (and Will)
>
>  --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> 
> wrote:
>  >
>  > sure and sure.
>  >
>  > what is the diameter for those 16mm, anyway? if folks need bigger it
>  > would be easy to drill them bigger, eh?
>  >
>  > the jacks... i think most people would beat you for that one....
>  >
>  > Scott Deyo
>  > The Bridechamber
>  > contact@...
>  > http://www.bridechamber.com
>  > Jealous Edison Record Kompany
>  > http://www.jealousedison.com
>  >
>  >
>  > On Mar 16, 2009, at 4:34 PM, loopcycle wrote:
>  >
>  > > ok, looked quickly at the design and it looks badass.  i would 
> most
>  > > likely pick up a panel.
>  > > one criticism though--if you're going to do the electro music dot 
> com
>  > > graphic, make sure it reads
>  > >
>  > > electro-music.com
>  > >
>  > > (INCLUDE THE HYPHEN because electromusic.com would be wrong.)
>  > >
>  > > i would like to put in a request for this panel design though.  
> can
>  > > the pot mounting holes be punched for the smaller 16mm alpha pots
>  > > instead of the larger bourns/spectrol pots?  should we poll the 
> group
>  > > to see who's using smaller alphas VS larger pots like the bourns?
>  > >
>  > >
>  > > ok, now here's a really stupid idea that i'd love:  punch the jack
>  > > mounting holes small to accommodate 3.5mm jacks.  please dont 
> beat me
>  > > for suggesting it.  (im doing more and more diy with mini jacks 
> these
>  > > days and scaling back my 1/4" collection.)
>  > >
>  > > hans
>  > >
>  > >
>  > >
>  > >
>  > >
>  > >
>  > > --- On Mon, 3/16/09, Paul Lord <plord@...> wrote:
>  > >> From: Paul Lord <plord@...>
>  > >> Subject: Re: [ModularSynthPanels] Klee and MFOS sequencer
>  > >> To: ModularSynthPanels@yahoogroups.com
>  > >> Date: Monday, March 16, 2009, 1:48 PM
>  > >>
>  > >>
>  > >> The Thomas White rotary design is in teh top level directory of 
> the
>  > >> Files section for this group, and yes, the FPE is almost 3x what
>  > >> Scott
>  > >> is proposing. That leaves a lot of dosh for 38 (?) super high end
>  > >> switches.
>  > >>
>  > >> Paul
>  > >>
>  > >> On Mon, Mar 16, 2009 at 1:40 PM, Scott Deyo <contact@bridechambe
>  > >> r.com> wrote:
>  > >> > I'm thinking $80-$100.
>  > >> > The FPE is nearly $300!!!!!!! There's a WTF for ya, huh?
>  > >> >
>  > >> > Scott Deyo
>  > >> > The Bridechamber
>  > >> > contact@bridechambe r.com
>  > >> > http://www.bridecha mber.com
>  > >> > Jealous Edison Record Kompany
>  > >> > http://www.jealouse dison.com
>  > >> >
>  > >> >
>  > >> > On Mar 16, 2009, at 3:37 PM, loopcycle wrote:
>  > >> >
>  > >> >>
>  > >> >>  id like to see the final design too, and get a rough idea of 
> the
>  > >> cost of
>  > >> >> the klee panel. i have a second kit sitting around and id 
> prefer
>  > >> to have a
>  > >> >> nice panel for it.
>  > >> >>
>  > >> >>  --- On Mon, 3/16/09, Scott Deyo <contact@bridechambe r.com>
>  > >> wrote:
>  > >> >>
>  > >> >>  > From: Scott Deyo <contact@bridechambe r.com>
>  > >> >>  > Subject: Re: [ModularSynthPanels ] Klee and MFOS sequencer
>  > >> >>  > To: ModularSynthPanels@ yahoogroups. com
>  > >> >>  > Date: Monday, March 16, 2009, 1:26 PM
>  > >> >>  > I'll be posting the design this week, hopefully.
>  > >> >>  > Panel parts shouldn't be bad.
>  > >> >>  > Wiring... lots of fun!
>  > >> >>  >
>  > >> >>  > Scott Deyo
>  > >> >>  > The Bridechamber
>  > >> >>  > contact@bridechambe r.com
>  > >> >>  > http://www.bridecha mber.com
>  > >> >>  > Jealous Edison Record Kompany
>  > >> >>  > http://www.jealouse dison.com
>  > >> >>  >
>  > >> >>  >
>  > >> >>  > On Mar 16, 2009, at 3:15 PM, Ron Pool wrote:
>  > >> >>  >
>  > >> >>  > > I might be in for two Klee panels if panel parts are
>  > >> >>  > easy to source.
>  > >> >>  > > Where can I see what Thomas White's Klee layout
>  > >> >>  > looks like?
>  > >> >>  > >
>  > >> >>  > > On Mon, Mar 16, 2009 at 4:00 PM, Jason Proctor
>  > >> >>  > <jason@redfish. net> wrote:
>  > >> >>  > > > i think you should relate what happened with the
>  > >> >>  > first one :-)
>  > >> >>  > > >
>  > >> >>  > > >>I'm in for a Klee.
>  > >> >>  > > >>
>  > >> >>  > > >>Yes, building a second one :)
>  > >> >>  > > >>
>  > >> >>  > > >>Paul
>  > >> >>  > > >
>  > >> >>  > > >
>  > >> >>  > >
>  > >> >>  > > --
>  > >> >>  > > Ron Pool <amp1ron@gmail. com>
>  > >> >>  > >
>  > >> >>
>  > >> >>
>  > >> >
>  > >
>  > >
>  >
>
>