Re: [ModularSynthPanels] ChaQuo Wiring Question...
2009-09-26 by James Elliott
It s all good. Ian got back to me shortly after posting my question, so I wasn t left hanging :) The Chaos section works, however I can t get oscillations from
Messages
Browse messages
Page 18 of 66 · 3299 messages matched
Re: [ModularSynthPanels] ChaQuo Wiring Question...
2009-09-26 by Scott Deyo
Sorry for not getting back to you on that one. Been sick all week. Blech! Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous
RE: [ModularSynthPanels] I going to try to simplify my life and hang out on the computer less so . .
2009-09-26 by Dave Halliday
http://www.xkcd.com/597/ Heh... Enjoy the peace and quiet! Dave
I going to try to simplify my life and hang out on the computer less so . .
2009-09-25 by JohnLeightonRice
. . I m going to unsubscribe from ALL of the Yahoo lists I m on and all synth forums too . . . except Muff s. Over the past year, I ve almost quit most of the
Re: [ModularSynthPanels] ChaQuo Wiring Question...
2009-09-22 by James Elliott
Here s the response I got from Ian. ... Sorry for the confusion. For R24a and R24b, their cw terminals are connected to J2 (pins 10 and 12). Their sliders are
ChaQuo Wiring Question...
2009-09-22 by James Elliott
Ok.... so I m a bit of a moron, so I have to ask... How do I wire up R24 (dual ganged QO Fine Tune pot) and S1 (High/Low Range switch)? For R24, the schematic
Re: Quantix-8?
2009-09-18 by m0n075
Scott, Are you gonna do the quantix-8 panels? Cheers, Dennis
Re: Living VCO
2009-09-14 by wjhall11
Frank, Paul - I see your dilemma. Again, assuming the features per JH s Option 3 (our panel designs are based on this feature set) the thing that actually
RE: [ModularSynthPanels] Re: Living VCO
2009-09-14 by Frank Vanaman
Hi all- That s the issue I m thinking about as well. I bought the TS-parts kit too, and after looking at the very compact counting dial, it would actually seem
Re: [ModularSynthPanels] Re: Living VCO
2009-09-14 by Paul Lord
Thanks Bill. Tobias verniers are much smaller than those so they ought to work fine. Whether they will LOOK ok from a spacing perspective remains to be seen
Re: Living VCO
2009-09-14 by Tom Adam
Here are some pics of my living vco panel in experimental phase;-) I got the new 5U panel drilled last night, so now I m working on a new overlay.
Re: Living VCO
2009-09-14 by wjhall11
Hi Paul - We re not discussing any specific counting dial. In the 5U or 7U layouts there is space for a variety of dials as long as they re within the space
MPS
2009-09-13 by Scott Deyo
I uploaded a 5U design to the preliminary bridechamber designs file. It s missing the Shell Modulation switch. That will go where the LED is, and the LED will
New file uploaded to ModularSynthPanels
2009-09-13 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Re: Living VCO
2009-09-13 by wjhall11
John - thanks, yes, exactly... the 4U version has the tiny 1/2 in knobs and very small - like around 1.2 - verniers - only a little bigger than the standard
Re: [ModularSynthPanels] Re: Living VCO
2009-09-13 by Paul Lord
Forgive me if I missed this, but, is anyone building this with the Tobias parts kit? Are THOSE the verniers we are discussing in this thread, or some other
Re: [ModularSynthPanels] Re: Living VCO
2009-09-13 by Scott K Warren
3. Verniers & large knobs, 7U, even verniers, and including waveshapers! skw Sent from my iPhone
Re: Living VCO
2009-09-13 by wjhall11
We completely understand your sentiment. But the 4U version is likely to lack support because it uses very small knobs - smaller than the 3/4 knobs Tellun
RE: [ModularSynthPanels] Re: Living VCO
2009-09-13 by John L Rice
Hi All, I m not planning on building this but I read all of these construction/planning with interest! ;-) I may have missed the discussion so forgive my
Re: [ModularSynthPanels] Re: Living VCO
2009-09-13 by Jeff Laity
I d be happy with the 4u version, I don t want half my cabinet taken up with this thing. Seems like the module is getting feature creep, keeps growing knobs
Re: Living VCO
2009-09-13 by wjhall11
Will and I were talking about this - We think that the two Living VCO panels worth considering are both counting-dial (Vernier) versions; the difference being
Re: [ModularSynthPanels] Re: BIG group, BIG panels, BIG stuff
2009-09-13 by eric f
That would be great... I think you ll find that people bought these in quantity. I have six PCBs waiting to be built. JH s projects have priority right
Re: [ModularSynthPanels] Re: BIG group, BIG panels, BIG stuff
2009-09-13 by Scott Deyo
Looks like 5U, standard MOTM spacing, huh? Shouldn t take long. I ve got a few others up soon, but may try to sneak it in with some more time-consuming
Re: BIG group, BIG panels, BIG stuff
2009-09-13 by adaaxs
-There is a way to bring the costs of bigger stuff down. I am doing large panels for someone and I was given the choice of a panel (very expensive) or an
Son of Storm Tide Flanger
2009-09-13 by wjhall11
OK - some new info is on JH s site today. First off, the BYPASS switch will be 4PDT. NKK makes one but it doesn t have the MOTM standard flat kind of toggle;
Re: [ModularSynthPanels] Re: BIG group, BIG panels, BIG stuff
2009-09-13 by Suit & Tie Guy
... i m too busy to do this, but what i think would be a good idea for this module is to use sliders and a front panel PCB. i m normally not really into
RE: [ModularSynthPanels] Re: BIG group, BIG panels, BIG stuff
2009-09-13 by laquarto wright
me2! count me in for one! its gona be big! To: ModularSynthPanels@yahoogroups.com From: klstay@msn.com Date: Sat, 12 Sep 2009 23:46:19 +0000 Subject:
Re: BIG group, BIG panels, BIG stuff
2009-09-12 by klstay
Did anything ever come of this? I have 3 PCBs and would love to buy 3 panels from BC for them...
RE: [ModularSynthPanels] Living VCO - Euro
2009-09-11 by David Ingebretsen
I also uploaded some updated and new Frac and another euro panel, including some tiny OScope modules, fixed filter bank, MOTM 300 VCO, and some others.
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2009-09-11 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Living VCO - Euro
2009-09-11 by David Ingebretsen
I just ordered a pair of Euro Rack format Living VCO panels I put together from Schafer. I ll throw the fpd files up on the site if anyone wants them. They can
Re: [ModularSynthPanels] Re: JH Polymoog Resonator Panel
2009-09-10 by Scott Juskiw
What s confusing about this circuit is that there is more than one way to implement the output. One method, as you ve noted below, is to have two pots feeding
Re: JH Polymoog Resonator Panel
2009-09-10 by wjhall11
OK - and now for a correction from Jurgen... RESON on the PCB is the resonator output level at the output jack. DRY is the level of dry input at the output
Re: [ModularSynthPanels] Re: JH Polymoog Resonator Panel
2009-09-10 by Scott Juskiw
I say, from top to bottom: GAIN FREAK EMPH By keeping FREAK in the middle you avoid any other possible conflicts with rotary switches, which can also be larger
Re: JH Polymoog Resonator Panel
2009-09-10 by wjhall11
eeek - OK - we move FREQ down - what makes sense to be on top - GAIN or EMPHASIS?
Re: [ModularSynthPanels] Re: JH Polymoog Resonator Panel
2009-09-10 by Scott Juskiw
... Even using the standard big knob MOTM grid, you can t fit a 24mm pot along the top. I tried that with my TLN-867 tuner/headphone thingy and had to swap the
RE: Living VCO
2009-09-10 by Tom Adam
I ve got some dials for sale. 3euro each, 50 left. Contact me of list. Pics here: http://modular.thebigear.be/#3.3 My Living VCO is ready, I ll post a pic
Re: [ModularSynthPanels] Living VCO
2009-09-10 by Ben Stuyts
... I d like a vernier-style panel. I love the looks of them. Ben
Re: JH Polymoog Resonator Panel
2009-09-10 by wjhall11
I ve emailed Jurgen asking about this. Thanks all. Bill
Re: JH Polymoog Resonator Panel
2009-09-10 by wjhall11
Oh - let s not forget that the MIX function is an educated guess at this point and needs to be verified either by Jurgen, or by studying the schematics when
Re: Living VCO
2009-09-10 by wjhall11
Unless you do a course/fine tune implementation a la Dave Brown (which, by the way, seems jut fine to us), you could design the panel with enough space for the
Re: Living VCO
2009-09-10 by wjhall11
Unless you do a course/fine tune implementation a la Dave Brown (which, by the way, seems jut fine to us), you could design the panel with enough space for the
Re: JH Polymoog Resonator Panel
2009-09-10 by wjhall11
So far as Will and I are concerned, we d be happy with no mods at all including the extra inputs and their attenuators. And again, in our case, we aren t
Re: [ModularSynthPanels] Re: JH Polymoog Resonator Panel
2009-09-10 by Scott Juskiw
How about swapping the position of the FREQ and GAIN pots? I don t see that it s necessary to have FREQ at the top. We don t need no stinkin mods! Three
Re: [ModularSynthPanels] Living VCO
2009-09-10 by Jeff Laity
How much are Verniers? Any chance of making a kit that includes them? Just make one panel with Verniers and I will learn to love them. :)