Modular Synth Panels

So far as Will and I are concerned, we'd be happy with no mods at all including the extra inputs and their attenuators.  And again, in our case, we aren't interested in the small-knob / 2U panel, but even so, Scott Juskiw makes a great point - the FREQ controls certainly needn't be at the top - Will says that's just the way he  imagined it should be based on the way these things are often layed-out - no over-riding functional consideration there.

So in the case of a 3U large-knob version, I believe there's more space at the top anyway, right?  And so far as mods - well - based on that last design of ours, you can eliminate input jacks 2 & 3 and have a no-mod version of the module. 

Bill and Will

 

--- In ModularSynthPanels@yahoogroups.com, Scott Juskiw <scott@...> wrote:
>
> How about swapping the position of the FREQ and GAIN pots? I don't see  
> that it's necessary to have FREQ at the top.
> 
> We don't need no stinkin' mods! Three inputs with attenuators (as Dave  
> Brown has shown) is all the hacking I plan to do.
> 
> On 9-Sep-09, at 7:53 PM, Scott Deyo wrote:
> 
> >
> >
> > Questions/ comments :
> > Since most people may use 24mm dual-gang Alphas for Freq, I should  
> > move them down a bit to make sure they clear rails/ cabinet tops.
> > I think the 2U's tickmarks will make it look extra cramped since I  
> > can't stagger the pots, really.
> >
> > What are the mods on this? If possible, I'd like to go non-mods.
> >
>