Modular Synth Panels

Hi all-

 

That's the issue I'm thinking about as well. I bought the TS-parts kit too,
and after looking at the very compact counting dial, it would actually seem
somewhat odd to have them on a panel that's big enough to accommodate much
larger counting dials. 

 

Also considering that the actual knob is notably smaller than the dial body,
having it along-side other knobs that are just about as big as the whole
counting dial body might seem a bit odd as well. Hmmm.

 

Did somebody ask for another can of worms to be opened?  :-)

 

At any rate, I'm just following along at this point. Obviously I'm going to
have to come up with a panel (actually two) from somewhere at some point.but
still in the head-scratching phase. Actually I'm in that phase most of the
time.

 

Frank

 

  _____  

From: ModularSynthPanels@yahoogroups.com
[mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of Paul Lord
Sent: Monday, September 14, 2009 11:14 AM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Re: Living VCO

 

  

Thanks Bill.  Tobias' verniers are much smaller than those so they ought to
work fine.  Whether they will LOOK ok from a spacing perspective remains to
be seen :)

Paul

On Sun, Sep 13, 2009 at 10:01 PM, wjhall11 <wjhall@....
<mailto:wjhall@...> com> wrote:

  

Hi Paul - We're not discussing any specific counting dial. 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.88/2357 - Release Date: 09/14/09
05:51:00