That is great news Bob, I have spent countless hours scouring the internet for info on designing such a device myself. I would like to order one of the boards and PICs but it won't be for a little while yet until I get back on my feet.
On 1 June 2015 at 13:01, Bob Grieb bobgrieb@... [Kawai-Teisco] <Kawai-Teisco@yahoogroups.com> wrote:
Hi,Although it's not available fully assembled, if you are handy with asoldering iron, or have a friend who is, and you would like to add MIDI
note on/off control to your SX-210, it is now possible at a reasonable cost.I designed this for a friend, who has installed it in two synths so farwith no issues. The local keybed works normally.A ribbon cable would be used, with an IDC female attached to the MIDIboard, and the other end stripped and tinned as bare wires, tack-soldered onthe underside of the keyboard connectors on the Kawai pc bd.A separate 2-pin header is provided for the MIDI jack connection.I am offering pc bds and programmed PIC chips, and the other componentsare all readily available.Details available by clicking on the link below.Bob