The Kawai & Teisco Analog Synths Group

      From: "Jesse Hall jesse.hall@gmail.com [Kawai-Teisco]" <Kawai-Teisco@yahoogroups.com>
 To: Kawai-Teisco@yahoogroups.com 
 Sent: Tuesday, June 2, 2015 6:42 PM
 Subject: Re: [Kawai-Teisco] MIDI interface for SX-210
   
    That is great news Bob, I have spent countless hours scouring the internet for info on designing such a device myself. I would like to order one of the boards and PICs but it won't be for a little while yet until I get back on my feet.


On 1 June 2015 at 13:01, Bob Grieb bobgrieb@... [Kawai-Teisco] <Kawai-Teisco@yahoogroups.com> wrote:

     Hi,
    Although it's not available fully assembled, if you are handy with a 
soldering iron, or have a friend who is, and you would like to add MIDI 
note on/off control to your SX-210, it is now possible at a reasonable cost.
     I designed this for a friend, who has installed it in two synths so farwith no issues.   The local keybed works normally.
    A ribbon cable would be used, with an IDC female attached to the MIDIboard, and the other end stripped and tinned as bare wires, tack-soldered on 
the underside of the keyboard connectors on the Kawai pc bd.
     A separate 2-pin header is provided for the MIDI jack connection.

      I am offering pc bds and programmed PIC chips, and the other componentsare all readily available.  

       Details available by clicking on the link below.
          Bob


Kawai SX-210 Synthesizer
|   |
|   |  |   |   |   |   |   |
| Kawai SX-210 SynthesizerKawai SX-210 MIDI Interface |
|  |
| View on www.tauntek.com | Preview by Yahoo |
|  |
|   |