Re: [AN1x] Synchronization problem
2006-11-07 by Ondrash Daree
Hello. Apologize for delay. I am so busy. I have tried to resolve this issue, but without success. I tried two AN1x and problem still persists. I mean that is
Messages
Browse messages
Page 61 of 268 · 13386 messages matched
Re: [AN1x] -- what knobs ?? --
2006-11-03 by Jeff
Hello Toni ! i have an AN1X but also a Red Sound Elevata virtual analog expander hooked to the AN1X* . The Red Sound has an assignable joystick like all Red
Re: [AN1x] Re: AN200 os update HELP!!
2006-11-03 by Dale
Is not the OS on the box side, that leaves the card inside intact. If you got a yamaha near by that will take the card, try that and see if the card is bad?
Re: [AN1x] -- what knobs ?? --
2006-11-03 by Rob Hill
I d keep the parameters that you need to see on the LCD left to the normal 8 AN1x knobs. You could have all the filter and filter mod parameters eg filter
Re: AN200 os update HELP!!
2006-11-03 by parmastuff
... yeah, at step 7 the unit just doesn t respond while powering on. I m a little reluctant to take it in for service because I only paid $180 for it not too
[AN1x] Re: AN200 os update HELP!!
2006-11-03 by parmastuff
Peter, thanks for the suggestion, but I had already tried a different adapter with no luck. if you have any more ideas please share them as I m desperate at
-- what knobs ?? --
2006-11-03 by Andrea TONI
Hello, i will get a second AN1X this weekend and want to drill inside on that empty top right panel a doepfer pocket controller. I have tons of ideas of what
Re: [AN1x] Re: AN200 os update HELP!!
2006-11-02 by Peter Bye
Greetings: Just for kicks, make sure your power adapter A) is the correct one, B) it didn t die on you, C) the cord, jack, etc, are good. This does happen all
Re: AN200 os update HELP!!
2006-11-02 by Jon
... the ... 7) Press and hold the [SONG], [PATTERN], and [EXIT] buttons on the AN200, then turn ON the power. The following version messages will be displayed:
Re: AN200 os update HELP!!
2006-11-02 by parmastuff
... on!!! ... local ... yeah, I followed the instructions - didn t touch the unit while it was updating, pressed the right buttons, etc. - but now it won t
Re: Controlling external synth voice from the Motif
2006-11-02 by Jon
... Have you checked the Forums at http://www.motifator.com/motif678/index_678.php I Googled MOTIF and MIDI Program Change and came across a discussion for the
Re: AN200 os update HELP!!
2006-11-02 by Jon
... that ... There had been another user on AN1x-list with the same problem. He posted back that he d followed the same procedure you link too
Re: AN200 os update HELP!!
2006-11-01 by parmastuff
... 0,,CNTID% ... didn t ... I tried calling Yamaha tech support and all they did was give me the number for a local service contractor. I really don t want
Controlling external synth voice from the Motif
2006-11-01 by Steve Cooke
I recently bought some analogue modelling synths via eBay with the intention of using them alongside my Yamaha Motif Classic. Setting up appropriate MIDI
AN200 os update HELP!!
2006-11-01 by parmastuff
I tried updating the OS of my AN200 by following these instructions: http://www.yamaha.com/yamahavgn/CDA/KnowledgeBase/KnowledgeBaseDetail/0,,CNTID%
Re: [AN1x] cool electronic space tracks - part one
2006-10-31 by Jeff
Fine tracks, reminiscent of the 70 s german keyboards groups . @+ J.F. ... avast! Antivirus: message Sortant propre. Base de donnÚes des virus (VPS): 0644-4,
cool electronic space tracks - part one
2006-10-31 by defriesepoort
Here are some of my older tracks with some heavy AN1X use! I had 3 of them! http://www.archive.org/details/Eppie_E_Hulshof_Historic_Edition enjoy Ep. Von
[AN1x] Re: AN1X Mac OSX Editor
2006-10-29 by Mo Cheez
Wow, you mean YOUR peecee lets you play some music between two crashes - when it s finally idle? Cooooooool… (It s just so evident that Macs are much more
Re: AN200 XGWorks Lite 3 - NEED!
2006-10-29 by Jon
... Call Yamaha and ask them for the bundle CD. Software solciits on this list are frowned upon :-/ Thanks Jon
AN200 XGWorks Lite 3 - NEED!
2006-10-28 by bignigbot
I got my AN200 off ebay and it didn t include the CD, so I really need XGWorks lite to play around with the computer editor and really unlock this thing. Any
Re: [AN1x] Re: AN1X Mac OSX Editor
2006-10-26 by Ed Edwards
Jon, you have no idea how tempting it is at this point to give a get a PC answer to this type of question. ... (It s just so rarely evident that Macs are
Re: AN1X Mac OSX Editor
2006-10-24 by Jon
... In your AN1x Edit folder, is OMSLibPPC.slb present? Don t move this to the Extensions Folder, leave it in the AN1x Folder. If you need to reinstall,
Re: AN1X Mac OSX Editor
2006-10-24 by Christopher
... with the ... with ... dumps to ... When I launch AN1x edit in classic, I get a popup that says Launch of AN1xEdit failed/The application AN1xEdit could
[AN1x] Re: My AN1x arrived & I need replacement keys
2006-10-21 by Jon
... aftertouch sensitivity of AN1x... ... Thank you - looking forward to it. Jon
Re: [AN1x] Re: My AN1x arrived & I need replacement keys
2006-10-21 by Bob S.
Thanks you all for the congrats. When I get some time, I will document how to adjust/readjust the aftertouch sensitivity of AN1x... Bob El Segundo, CA ...
Re: [AN1x] Re: My AN1x arrived & I need replacement keys
2006-10-20 by Jeff
Congratulations Bob ! Cheers. J.F. ... avast! Antivirus: message Sortant propre. Base de donnÚes des virus (VPS): 0642-5, 20/10/2006 Test du: 21/10/2006
[AN1x] Re: My AN1x arrived & I need replacement keys
2006-10-20 by Jon
... than $7 each, just remember to keep the metal spring piece inside the key as it does not come with the replacement keys) and did the job. It was a little
Re: AN1X Mac OSX Editor
2006-10-20 by Jon
... AN1xEdit will run within Classic under OS X if you have OMS installed in Classic along with the comparable driver for your USB MIDI Interface. Otherwise
Membership
2006-10-20 by Benjamin Kanarek
Thanks. Ben __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around
Re: [AN1x] Re: My AN1x arrived & I need replacement keys
2006-10-20 by Bob S.
..........entered in and prayed and laid his hands on him, and healed him......... I fixed it all ! I found replacement keys in-stock at the Yamaha parts
AN1X Mac OSX Editor
2006-10-20 by benjaminckanarek
Hello; I have a Mac G5 dual 2.3 running Pro-Tools 7.1. Is there a AN1X editor that works with the AN1X? Thanks Ben
Re: [AN1x] Re: AN1x not working
2006-10-18 by Tony Sheeran
Dead right, thanks very much Jeff. I have a CS1x as well, so I just tried swapping the power supply over, and the AN1x sprung into life. I would have never
Re: [AN1x] Re: AN1x not working
2006-10-18 by Tony Sheeran
Brilliant! Thanks Peter. I have a CS1x as well, so I just tried swapping the power supply over, and the AN1x sprung into life. I would have never guessed that
Re: [AN1x] AN1x not working
2006-10-18 by Tony Sheeran
Thanks for the reply Rob. A few others have suggested trying a different power supply, and as I have a CS1x as well, I just tried swapping the power supply
Re: [AN1x] Re: AN1x not working
2006-10-18 by Jeff
Hi ! i agree with him , he was just quicker than me :-) because my answer would be the same : your supply is probably out . It is not very expensive .... A
Re: AN1x not working
2006-10-17 by pcbye111
Greetings: You may want to check your power supply -- wall wart. Is almost looks like a low voltage or limited current issue. Get another 12v DC power supply
Re: [AN1x] AN1x not working
2006-10-17 by Rob Hill
I d try contacting your local Yamaha distribution wherehouse and ask for the service department or drop them an email. I got bits for an old DX7 many years
AN1x not working
2006-10-17 by tny_shrn
After 8 years or so, my trusty AN1x has developed a serious fault. The display illuminates, showing YAMAHA 1997 , which flashes weakly, and that s it. It
Re: AN200 with AN1x patches.
2006-10-13 by Brian Rost
The AN1x is bi-timbral with two scenes for each patch. The AN200 is monotimbral so scene 2 in the AN1x patch is lost. Patches that use scene 2 for layering
Re: [AN1x] Synchronization problem
2006-10-13 by Ondrash Daree
Hello guys. I am going to visit my parents for the weekend. I will try it on sunday. Best Regards. Odrash.... ... From: Jon To:
Re: [AN1x] Ribbon Controller Problem
2006-10-12 by Daniel Mandic
... From: Ed Edwards To: Sent: Thursday, October 12, 2006 5:37 AM Subject: Re: [AN1x] Ribbon
Re: [AN1x] Synchronization problem
2006-10-12 by Jon
... other MIDI info that its not using like sysex ect? Yeah, the LED blinking doesn t appear to be an issue - mine and every other AN1x I ve seen has always
Re: [AN1x] Synchronization problem
2006-10-12 by Rob Hill
My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11). With the LED s flashing and things getting out of sync is your AN1X getting any too
Re: [AN1x] Re: My sustain pedal does not work
2006-10-12 by Jeff
... Hello ! if i remember well the contact inside the pedal must be a normally closed model .... Check if the tip and the body of the jack are shorted when
Re: [AN1x] Synchronization problem
2006-10-12 by Jeff
... Hello ! On mine the scene LEDs blink sometimes ... don t care , it is not a failure but more likely a minor bug, it depends on the current patch.. The
Re: [AN1x] Synchronization problem
2006-10-12 by Ondrash Daree
Hello John. Thank you for your answer. Voice Common I exactly use... I have a MIDI Interface from MOTU MidiTimepiece AV (connected via Parallel Port) on a
AN200 with AN1x patches.
2006-10-12 by bignigbot
Hey there, About to get the AN200. Just wanted to know if all parameters will be intact if I bring AN1x sounds to it, or do I loose anything? How closely alike
Re: My sustain pedal does not work
2006-10-12 by Jon
... Follow up to previous post: FC = MIDI CC 4, FS = MIDI CC 64 These cab be altered using the Ctrl device and Ctrl No under UTILITY/SETUP Jon
Re: My sustain pedal does not work
2006-10-12 by Jon
... does not work with the ... to be able to find the ... ideas?...thank you...spiramus ... There is no polarity setting on the AN1x :-( Double check a) you
Re: [AN1x] Synchronization problem
2006-10-12 by Jon
... Synchronization has lost. ... as MIDI. When I press Play in SX3 and record MIDI events (I have chosen an Arp.preset) AN1x plays with ... to record arpeggio