[AN1x] Synchronization problem
2006-10-12 by Ondrash Daree
Hello friends. I have a problem with synchronization between An1x and Cubase SX3. Synchronization has lost. I have set up MIDI TxCh1, RxCh1, TxpatternCh2,
Messages
Browse messages
Page 62 of 268 · 13386 messages matched
Re: [AN1x] Ribbon Controller Problem
2006-10-12 by Ed Edwards
Daniel, I think your problems are probably resulting from a bad ribbon controller rather than bad software in the AN1x. I don t experience any fluctuation
My sustain pedal does not work
2006-10-11 by spiramus2006
Hi guys...new to the group....The issue is that my sustain pedal does not work with the an1x...I suspect it must be a polarity issue...however I don t seem to
re: headphones
2006-10-10 by spaceanimals
Jeff wrote: 3: edit your patch and check if the pan setting is not full right or full left . That s a good thing to look at. If you have questions see
Re: [AN1x] Re: Headphones
2006-10-10 by Jeff
Hi Joe ! first : try another headphones set . If the stereo sound is back it s either the headphones or the headphones male jack . If not : 2 : try to plug
Re: Headphones
2006-10-10 by an1x_joe
Thank you Jimmy, but i plugged the phones into the headphone and only can heard by the left and If i plug the phones into the output right the sound listens
re: Headphones
2006-10-10 by spaceanimals
It s not normal. Plug the phones into the headphone jack (the one that s all the way over) and you should hear lovely stereo. Jimmy
stereo headphones
2006-10-10 by an1x_joe
Hi everybody, I have buy a an1x recently and it seems works fine but when i have connect my headphones i only can hear the sound by the left and by right
Re: [AN1x] Ribbon Controller Problem
2006-10-08 by Jon
... experiment would be to A/B a couple of patches; one should perform correctly and not return to center and one should do the nasty. I ll get on my AN1x
Re: [AN1x] Ribbon Controller Problem
2006-10-08 by Daniel Mandic
... From: Ed Edwards To: Sent: Sunday, October 08, 2006 3:52 AM Subject: Re: [AN1x] Ribbon
Re: [AN1x] Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-08 by Daniel Mandic
... From: Jeff To: Sent: Sunday, October 08, 2006 10:23 AM Subject: Re: [AN1x] Anyone have any luck with
Re: [AN1x] Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-08 by Jeff
Hello Daniel ! thanks for your advice ! The only computer (now definitely dead..) without problems with MIDI tasks was the old time Atari . It was my first one
Re: [AN1x] Ribbon Controller Problem
2006-10-08 by Ed Edwards
... WTF? So let s get your advice straight - you re saying that if the ribbon controller is not assigned to anything in the control matrix it will eliminate
Re: [AN1x] Ribbon Controller Problem
2006-10-07 by Daniel Mandic
... From: jakegjohn To: Sent: Saturday, October 07, 2006 6:51 PM Subject: [AN1x] Ribbon Controller Problem
Re: [AN1x] Ribbon Controller Problem
2006-10-07 by jakegjohn
Am I missing something because I did RTFM? The manual states that if you have not set A.RbX to Pitch Up/Pitch Down that it will keep that position at which you
Re: [AN1x] Ribbon Controller Problem
2006-10-07 by Jon
... Wow, it s been awhile since this issue was brought up - I don t recall if we determined it was an intermittant bug, or user error. ... Yeah, of course -
Re: Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-07 by Jon
... My pleasure. I was able to get it to work ... SysEx dumps over USB with AN1xEdit have always been dodgy - I receive the same errors you do, but the
Ribbon Controller Problem
2006-10-07 by jakegjohn
Hello, I just bought a used AN1X; it is a great synth. It is a lot of fun. But I am having the dreaded ribbon controller jump back to mid point (and other
Re: Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-07 by yesmckay
Hey, Jon, thanks for the info, buddy! I was able to get it to work without the MidiBridge thanks to you. I do get lots of receive errors when trying to
Re: [AN1x] Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-07 by Daniel Mandic
... From: Jeff To: Sent: Saturday, October 07, 2006 8:40 AM Subject: Re: [AN1x] Anyone have any luck
Re: [AN1x] Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-07 by Jeff
Hello! i m a little bit old school with synths and i rather use knobs and switches than software* . But i have some knowledge in computing and PC hardware
Re: Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-07 by Jon
... the ... edit ... Which release of OS X are you running? Under Panther and Tiger, you don t need MIDIBridge - OMS in Classic will see your USB MIDI
Re: Microtuning support in AN1x?
2006-10-07 by Jon
... some ... but ... in ... The AN1x does not support Microtuning tables directly. It s been awhile since this topic has been discussed, but a couple of users
Anyone have any luck with MIDIBridge and OS X running Classic?
2006-10-06 by yesmckay
Hi. I Just joined the group ;-) Nice spot! I can get midi signals in and out of OMS (tests okay) in classic through my emagic USB midi interface using
Re: [AN1x] Microtuning support in AN1x?
2006-10-06 by Rob Hill
I know the DX7 mk2 can do this. I m not aware of the AN1X being capable. zzbbzzdd wrote: Hello members!
Microtuning support in AN1x?
2006-10-06 by zzbbzzdd
Hello members! Anybody tried to dump alternate tuning to the synth? Tried to dump some scales by scala-program (http://www.xs4all.nl/~huygensf/scala/) but with
Re: [AN1x] Help needed in locating Depeche Mode sounds
2006-10-03 by lou.kadassy
You re right! I actually *knew* it was a melodica, honest. I m progressing, anyway. HPF and FM seem to do the juob - no quite right, although maybe close
Re: [AN1x] New file uploaded to AN1x-list
2006-10-02 by Jon
... Dale, Just use AN1xEdit to dump to your AN200 - just remember to put AN1xEdit into PLG150AN Mode (from the Setup menu if I recall correctly.) DX200? You re
Re: [AN1x] Re: Drehbank preset for AN1X.
2006-10-02 by Rob Hill
Thanks for that Andrea, it wouldn t surprise me Yamaha messed up the CC table te rest of the manual is pretty dire. It seems like our Drehbank layout s are
Re: [AN1x] Help needed in locating Depeche Mode sounds
2006-10-02 by Steve Cooke
I think the harmonica sound to which you refer is actually a melodica, not a harmonica. See http://en.wikipedia.org/wiki/Melodica and
Help needed in locating Depeche Mode sounds
2006-10-02 by lou.kadassy
Hi everybody, I m trying to get ready for my first gig, and I need to perform the two main lines for Everything Counts by DM on my mean blue machine. Just to
Re: Drehbank preset for AN1X.
2006-10-02 by Andrea TONI
Rob, ... i think they didn t but they mistyped the table on page 9 CC Modes on the annex manual Midi CC 28 is marked as PEG Sus but it should be FEG Sus Midi
Re: [AN1x] Drehbank preset for AN1X.
2006-10-01 by Andrea TONI
Hello Rob, The Dbank is a fantastic way to edit sounds in real time ! here is my layout : http://home.wanadoo.nl/atoni/Studio/JP6_Rackit/An1x_blk.jpg i did
Re: [AN1x] New file uploaded to AN1x-list
2006-10-01 by Daniel Mandic
... From: Rob Hill To: Sent: Saturday, September 30, 2006 8:01 PM Subject: Re: [AN1x] New file uploaded
New file uploaded to AN1x-list
2006-10-01 by AN1x-list@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the AN1x-list group. File :
Re: [AN1x] New file uploaded to AN1x-list
2006-10-01 by Rob Hill
Interesting stuff! Thanks Dan ;-) ... From: Rob Hill To: Sent: Saturday, September 30, 2006 8:01 PM
Re: [AN1x] Drehbank preset for AN1X.
2006-10-01 by Rob Hill
Hi, I’m not sure about a text file as it would probably take longer to type out than programming the sounds themselves (and it was a few weeks back now) but
Re: [AN1x] New file uploaded to AN1x-list
2006-10-01 by Dale
now what would be even cooler if these could be converted for use with the AN200 or DX200... Rob, do you think you could post a text file with them (zip maybe
Re: [AN1x] New file uploaded to AN1x-list
2006-09-30 by Rob Hill
Oops! :-S If this is the case I think I must have saved the entire bank each time instead of each individual patch (no wonder the files are so big)! Sorry I m
Re: [AN1x] New file uploaded to AN1x-list
2006-09-30 by Jon
... enjoy! ... Hi Rob, Finally made some time to download and audition your Jean-Michel Jarre sounds - well done! These are terrific - prompted me to stop at
Re: ribbon cleaning
2006-09-30 by Jon
... In the Ctrl Matrix, under the VOICE/SCENE SETUP menu, what is the value for Depth parameter? If it is set to dirct that would account for the wide range
Re: [AN1x] ribbon cleaning
2006-09-30 by Jeff
Hello! i don t have the problem, so i never tried to have a look at this part . As far as i know it is a pressure sensitive surface often found on laptops
ribbon cleaning
2006-09-29 by quivzzz
hi, i got serious problem with my an1x vcf cutoff automatically go up to very high value. i found that if i turn off ribbon control, everything s fine. but
Re: [AN1x] Faulty black key
2006-09-27 by Bob S.
Thank you Brock for that.....I have been waiting for this reply before I proceeded with disassembly....now I can take MY AN1x keyboard out to replace the
Re: [AN1x] Faulty black key
2006-09-27 by Jeff
... Yes ! But you can find some patches not using the velocity of the keyboard : organs, a lot of classic synths sounds (most of the vintage machines were not
Re: [AN1x] Faulty black key
2006-09-27 by brock
Un-screw all the screws on the external base. The panel then comes away quite easily. Now you will see inside your AN1X -there is a little PCB just of the long
Re: [AN1x] Faulty black key
2006-09-27 by Bob S.
Yes. Velocity & aftertouch. Bob El Segundo, CA
Re: [AN1x] Faulty black key
2006-09-27 by brock
I m wondering if there is something else faulty, when I press a key should I hear several steps in volume? I.E. is the keyboard velocity sensitive? At the
Re: [SPAM] [AN1x] Re: Program change help
2006-09-25 by Scott
Thanks for posting this. I remember those little devices, they were pretty good and didn t cost hardly anything too. I l try and find one in the U.S., my luck
Re: Program change help
2006-09-25 by Andrea TONI
Hello, is hard to find them but u can use one of those to remove Program change http://cgi.ebay.com/Anatek-Pocket-Filter_W0QQitemZ330030382264 12 h to go ..