The Yamaha AN1x Synthesizer mailing list

--- In AN1x-list@yahoogroups.com, "Jon" <jondl_2000@...> wrote:
>
> --- In AN1x-list@yahoogroups.com, "spiramus2006" <spiramus2006@> 
> wrote:
> >
> > Hi guys...new to the group....The issue is that my sustain pedal 
> does not work with the 
> > an1x...I suspect it must be a polarity issue...however I don't seem 
> to be able to find the 
> > polarity section in the an1x in order to change it.....Any 
> ideas?...thank you...spiramus
> >
> 
> There is no polarity setting on the AN1x :-(
> 
> Double check a) you have the pedal plugged into the right jack and b) 
> the FS and FC settings under Utility Control are set accordingly. 
> Don't recall the default settings off the top of my head, will double 
> check later...
> 
> Otherwise you are probably right and the polarity of your pedal does 
> not match the AN1x.

Follow up to previous post: FC = MIDI CC 4, FS = MIDI CC 64  These cab be altered 
using the Ctrl device and Ctrl No under UTILITY/SETUP

Jon