Yahoo Groups archive
Messages
Page 53 of 268 · 13386 messages matched
2007-11-25 by Jeff
Hello Nigel! i ve found the .pdf version of the scanned repair manual, but it s too huge (8,5 Mo) to go through the E-mail channel. :-( I found it on a SIEL
2007-11-25 by NovemberPapa
Hi, Any info you have on the DK600 would be gratefully received. BTW, the DK600 was an updated Opera 6, some enhancements from what I remember - eg weren t the
2007-11-25 by Jeff
Hello ! ... This battery leakage problem is well known on these old things, the Korg Poly 6 often suffers the same disease. Hopefully it is not often a very
2007-11-25 by NovemberPapa
Hi, Having a variety of gear is the key IMO, so you have a palette to choose from. I don t have an AN1x, but I do have the AN board (in a Kenton Plugstation
2007-11-24 by Peter Korsten
... As is pretty much the case with the AN1x. :) ... I have to say, though, that the EX5 has some real gems in the presets, including a few that come straight
2007-11-24 by Jeff
... That is the same on most synths, even expensive... the preset sounds or the demo jingle are bad or at least un inspiring. Or you have only a few good
2007-11-24 by Desdinova
On Nov 24, 2007 11:13 AM, Peter Korsten wrote: ... There s ensoniq for you. It only took them, what, ten years before they
2007-11-24 by Peter Korsten
... I ve played on a Fizmo (keyboard) once, and since each and every preset sounded like rubbish, I decided it wasn t for me. Of course, a synth is more than
2007-11-24 by Jon
... synths (as I). ... am in front of a PC instead of in front of a hardware synth. And I can t seem to get the reliability out of a PC that I get out of the
2007-11-24 by Jeff
Hello Bob ! you have a lot of gear... nice! I suppose thet you were looking after some kind of sound and that, despite all these instruments, you ve never
2007-11-24 by Bob S.
Thank you Jon for those words & insight....I see you have played with many hardware synths (as I). I myself have not be converted to software synths....I seem
2007-11-24 by Jon
... I still enjoy my AN1x, but a plethora of software synths have seen it used less often so I understand why you might want to sell. What s the going price
2007-11-23 by Bob S.
Just sold my MS2000R and am thinking of selling my AN1x too.... having second thoughts.....maybe selling because I just seem to have to much in overlapping
2007-11-18 by Jon
... I don t recall any such thing...perhaps it was a commercial sound bank? There were a couple of banks of Roland emulations - including the JP8000
2007-11-17 by jmrchiro
Hi, does anyone havea copy of the great prophet 5 emulations someone made of the first 64 presets for the prophet 5 on the an1 or plg an board? I had them
2007-10-26 by scotbotuk
... What a great idea, didn t think of that. Thanks!
2007-10-26 by Ed Edwards
Scott, The best method would be to use the AN1x Editor software. Both of the changes you want to implement are very easy using the software, whereas using the
2007-10-25 by Rob Hill
Yes this works. Brian Rost wrote: 2) Is it possible to create a step sequence with no note data in
2007-10-25 by Brian Rost
... Set the gate time and velocity to 0 for all steps, see if that works.
2007-10-25 by scotbotuk
Hi, I ve been using the AN1x for a long time but there s still a couple of things i havn t figured out yet: 1) Is it possible to initialize the control matrix
2007-10-24 by synthpimp
AN1x like new with v1.04 ROM. Barely used, MINT condition and functions perfectly. Plastic protective film still covers LCD. Includes original box, manual,
2007-10-08 by studiosale2007
hello, thanks to everyone for their help. i did solve the problem. well, not really, cause there wasn t ever a problem at all. shame on me ;-). i have checked
2007-10-06 by Jeff
I agree with Ed ... for losing his patience and for MidiOx too. I have this software (free...) and it works great. I suppose that Jimmy s soft sequencer has
2007-10-06 by Ed Edwards
Now Dan, if the list lost Jimmy, we wouldn t have any fun anymore. Or I might turn into a dick like you and drive everybody else away leaving you to rant here
2007-10-04 by Summa
Should be solved by setting the active active sensing filter for the AMT8... ... -- CZ/VZ mailing list : http://groups.yahoo.com/group/CZsynth FMHeaven
2007-10-04 by Jeff
... Nice trick ! J.F.
2007-10-04 by Jeff
Hi ! maybe could you filter the incoming midi data except notes (note on, note off, velocity and so on) ? Cheers J.F.
2007-10-04 by Dan
Jimmy who? Get lost mate...or go and write stoopid stuff somewhere else... I will tell you how mate...just have patience.... Dan
2007-10-04 by spaceanimals
Do the ssame thing you would for the VCR that blinks 12 all the time. Duct tape over the blinking light. Jimmy
2007-10-04 by studiosale2007
Hello, i m using a yamaha an1x as a master keyboard connected by midi i/o to emagic amt8. everything works fine but i was wondering, why the an1x does send
2007-10-04 by Brian Rost
I am offering 2 PLG150-AN boards for sale. I have the boards only, no packaging or documentation so I will provide a CD-R with PDF copies of the docs and
2007-10-03 by Jon
... can ... both ... version ... be ... at ... very ... a ... All of the Yamaha AN editors will run under Classic on a G5 PPC. Obviously none of these are
2007-10-02 by mhz@io.com
Yes, v1.04 is still available. Mark ... From: Jon To: Sent: Tuesday, October 02, 2007 10:35 AM Subject:
2007-10-02 by Denis Regenbrecht
Hi Jesse, ... I can t answer your question, but as an aside, there s a beta version of Clavia s original Nord Modular editor working under OSX. It can be found
2007-10-02 by Rob Hill
Why not just get a Regelwerk, Kenton, or Novation SL? Rob. Jesse Buehler wrote: Does anyone know if a Hendheld PC such a a NEC
2007-10-02 by Jeff
Hello ! Back in the past months some of us were wondering about the differences between the different releases of the O.S.... I believe there is no obvious
2007-10-02 by Jesse Buehler
Does anyone know if a Hendheld PC such a a NEC mobilepro 900, can run windows apps? I wasthinking that with a usb MIDI unit, it would make a cool synth editor
2007-10-02 by Jon
... 1.04 OS corrects an erroneous low voltage warning which can occur prematurely and also corrects the audio response when modulating the depth, i.e.,
2007-10-02 by epigraphs
1. Turn OFF the power. 2. Press and hold the [0], [-] and [+] buttons down simultaneously while turning ON the power. But what are the changes between 1.01,
2007-09-30 by Jeff
Hi Jimmy! happy? I am too... for you! Sometimes playing music can lead to memorable jams with others groups or musicians. Cheers. J.F.
2007-09-30 by spaceanimals
Had a blast last night. The Space Animals played at a birthday party. Outdoors. Food. 2 kegs. I was a little nervous because the band before us was very good.
2007-09-29 by Jon
... do I need 2 separte editors - An1edit and AN150 edit? ... AN1xEdit has a PLG150-AN mode - I don t have it running in front of me right now, but IIRC it s
2007-09-29 by Alien Martian
Hello, How can I use the AN1X and the PLG150AN on on the same editor, or do I need 2 separte editors - An1edit and AN150 edit? Are there eany good tips how to
2007-09-29 by Jeff
Hello Jesse ! if they re stored as MIDI files you can write them in your synth and save them again in another format compatible with your editor. Cheers J.F.
2007-09-29 by Jeff
Hello Dave ! ... Yes, because both channels are not mixed properly . If you need only a mono signal to plug in your sound card or mixer you must use the L-
2007-09-27 by Ioan
... would an an200 read sysex from a an1x? I was hoping that I could load the sysex into an1xedit, then save it in the normal .an1 format. ... I don t think
2007-09-27 by Jon
... from a an1x? I was hoping that I could load the sysex into an1xedit, then save it in the normal .an1 format. I don t know Ableton Live 1st hand - never
2007-09-27 by Jesse Buehler
________________________________ To: AN1x-list@yahoogroups.com From: jondl_2000@yahoo.com Date: Wed, 26 Sep 2007 14:38:51 +0000 Subject: [AN1x] Re: patches
2007-09-26 by Jon
... for some reason, I saved some as .mid files. Now, I cannot get an1xedit or an200 editor to open these files. What do I need to do to get this done. A
2007-09-26 by Jesse Buehler
Hello All, I ve some patches from my old an1x days that I d like to use in my an200. Most work, but for some reason, I saved some as .mid files. Now, I