Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-27 by Francis Cote
I haven t tried SheepShaver, since I have actual Macs. I tried 2.21 on the Quadra 700, PowerMac 7100 and a Wallstreet II PowerBook G3 and it ran on all of
Messages
Browse messages
Page 16 of 236 · 11758 messages matched
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-27 by Robin Sutcliffe
Thinking perhaps a 68k/PPC issue in the emulator actually. I think it s emulating a 68k but if it s a PPC then 2.0 won t run. . . On Saturday, December 27,
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-27 by Robin Sutcliffe
Hi Francis, I m trying to use Turbosynth 2.0 under sheepshaver emulation with OS 7.5.3 (before I get the Quadra just to check it runs) 2.0 will not playback
Re: [emax] emax foot warmer ( very rare)
2014-12-26 by wandamusic@...
What a coincidence! I have one too, 20 years old and in grey. Blessings, Wanda In a message dated 12/26/2014 10:16:26 A.M. Eastern Standard Time,
emax foot warmer ( very rare)
2014-12-26 by Matt Ferrari
http://imgur.com/1Ai3rK2
Re: [emax] closed service shop
2014-12-25 by bmacdoug1 .
Thanks Again Jammie for all your contributions...Emax forum and others. Your time is valuable and your knowledge is appreciated. I know you had mentioned
Re: [emax] closed service shop
2014-12-24 by Nik Kinloch
Hi Jammie, This is a massive loss to the Emax community. Thanks to your work, I have a fully working machine now, whereas I d have a broken one that would be
Re: [emax] closed service shop
2014-12-24 by Scott Stanley
Hey Jammie, Sorry to hear this man but, I totally understand. I truly appreciate any advice you have offered me. Thanks for all your hard work and best of
Re: closed service shop
2014-12-24 by radiokomitet@...
You are BIG MAN with passion... good luck in future.
Re: [emax] closed service shop
2014-12-24 by Krikor
Hello Jammie, Bad to see you leave and stop doing the fixing in those machine. It s sad to read you...the people doing passionate work in a time where
Re: [emax] closed service shop
2014-12-24 by Niklas Ehrlin
Sorry to see you leave, thanks for the help youve been giving! Collectively, and perhaps Ted specifically, holds alot of knowledge on these machines so
closed service shop
2014-12-24 by jammie.emma@...
sorry to all but im closing shop i have one emax customer to forfill and thats it i will not be doing or taking on any more service work as i cant take the
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Francis Cote
Nice! On Tue, Dec 23, 2014 at 3:20 PM, Robin Sutcliffe rssutcliffe@gmail.com
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Robin Sutcliffe
Thanks mate. Yes very lucky huh, surprised to find that right away! He s apparently got an audiomedia II card as well : ) On 23 December 2014 at 21:13,
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Francis Cote
Lucky man! Have fun with it. On Tue, Dec 23, 2014 at 3:11 PM, Robin Sutcliffe rssutcliffe@gmail.com
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Robin Sutcliffe
Thank for the advice Francis! I found a Quadra 840av for 60euros so I ll try that out 1st without a DSP from digi and see how it runs, maybe add one later.
Re: Emax II Floppy drive tip
2014-12-23 by ozgoskar@...
hello could someone help me to set it to id 0? i also have this floppy disk drive and it wont work for me. do i need to do any other modifications than setting
Re: [emax] Emax II service manual
2014-12-23 by schtom83318@...
I ended up ordering a nos power supply from bigbeatmarket on eBay. I messaged him and he has a few more if anyone is interested. I figured the cost of the new
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Francis Cote
No prob. If you stick to a 68k machine, try getting a Quadra. I haven t used anything for lack of free time, but I found the PowerMac less stable than the
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Robin Sutcliffe
Hi Francis, Thanks very much for your insight and workflow tips! And thanks very much to drsyncenstein for the download files. I ll post a new message when I
Re: [emax] Turbosynth 2.0 + hardware sampler
2014-12-23 by Francis Cote
Happy winter solstice to you to! You can download a copy of TurboSynth from the files section of the group. It s 2.2x something. I ve used it on a Quadra 700,
Turbosynth 2.0 + hardware sampler
2014-12-23 by Robin Sutcliffe
Hi, I m looking to set up a Turbosynth system using a hardware sampler. I wonder if anyone here has tips on what will/not work in terms of the system? I
emax rack ears
2014-12-22 by Carl Simms
hi if you have rack ears for sale please contact me with a price. Thanks
Re: [emax] Emax II service manual
2014-12-21 by emma
The missing sockets are for diagnostic chips The reason no blue back light and the wine os the backlight has failed and now there is very low resistance and
Re: [emax] Emax II service manual
2014-12-21 by schtom83318@...
I really want to apologize for any unrest in the group I might have caused. I really appreciate everyone s replies. I just want to get this Emax II up and
Re: [emax] Emax II service manual
2014-12-21 by djtbs1@...
Scott- I specifically mentioned we can t post the files for the schematics here. Then you send a mail to the group with a link to the file, basically
Re: [emax] Emax II service manual
2014-12-21 by emma
The psu are made by a tiawan company call skynet There are several version revisions The first were linear types with a switching circuit that if the switch
Re: [emax] Emax II service manual
2014-12-21 by Ted Summers
Schematics for the various power supplies are not in the Emax 1 or Emax 2 service manuals. The power supplies were supplied to Emu by a couple of different
Re: [emax] Emax II service manual
2014-12-21 by Scott Stevens
DOES ANYONE HAVE THE EMAX II PSU SCHEMATICS???????????????????????????? On Saturday, December 20, 2014 2:38 PM, Ted Summers djtbs1@gmail.com [emax]
Re: [emax] Emax II service manual
2014-12-20 by Ted Summers
EVERYONE- One may question all they wish in regards that copyright makes sense or not. I agree it would be fine in my opinion for it to be freely available.
Re: [emax] Emax II service manual
2014-12-20 by krikor kouchian
that must be a LCD screen backlit part if it is the same as the emax… Le samedi 20 décembre 2014, schtom83318@yahoo.com [emax]
Re: [emax] Emax II service manual
2014-12-20 by krikor kouchian
I wrote to Creative regarding this, once I bought a casio RZ1 service manual from such reseller, and the legit thing was totally nonsense of course, since that
Re: [emax] Emax II service manual
2014-12-20 by emma
Thats the back light inverter It means the back light is dead Sent from Samsung Mobile ... From: schtom83318@yahoo.com [emax] Date:
Re: [emax] Emax II service manual
2014-12-20 by schtom83318@...
So I can pay music parts for a downloadable manual and he ll make sure to get the money to creative? It s the little black box next to the processor that I m
Re: [emax] Emax II problems
2014-12-20 by Carl Simms
Sounds like the box you are describing is the inverter which is to power el-foil backlight. imgur: the simple image sharer ... On Friday, December 19, 2014
Re: [emax] Emax II service manual
2014-12-20 by Ted Summers
Tom- That s because it s still copyrighted. That s why it s not in the files section. I believe you can purchase it at musicparts.com Please note that the
Emax II service manual
2014-12-19 by schtom83318@...
Does anyone have an Emax II service manual with the schematic on it? I can t find one on the web to download. -Tom
Re: [emax] Emax II problems
2014-12-19 by schtom83318@...
I don t see one near the CPU. Do I have to take the black cover off the cpu? I just have a little black box that had a sticker on it stating it was the cpu.
Re: [emax] Emax II problems
2014-12-19 by JAMIE logan
check the bypass cap at the cpu On 19 December 2014 at 22:13, schtom83318@yahoo.com [emax]
Re: [emax] Emax II problems
2014-12-19 by schtom83318@...
The voltages I got are Y +5 G 0 Or +12 Y +5 GR 0 OR +12 P -12 Y +5 GR 0 Or +12 P -12 I do hear a whining noise from the CPU. I ve got a scope but it s
Re: [emax] Emax II problems
2014-12-19 by JAMIE logan
that sounds like a psu fault have you got a tester to check the voltages of the psu and a scope to check for ripple on the dc lines On 19 December 2014 at
Emax II problems
2014-12-19 by schtom83318@...
I just purchased an Emax II and the screen is blank. If you turn it on again you get three lines. I have taken every chip out and cleaned and reseated. I
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-18 by emma
You can use them in the emax Just save as wav file then use emxp to make a emax sample from them you can save them In 16k 32k 64k 128k 256k The only problem is
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-18 by bmacdoug1 .
Ted, Garth and Jammie need to be cloned.....(i thank you guys for being accessible resources of knowledge) Speaking of music creation. Have anybodys used the
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-18 by emma
Thanks as was mentioned I was away in france in a remote place away from the world I did mention it as did my wife My wife did mesage to say I would contact
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-17 by carlthepianist@...
Hi guys, this topic has spun out of control, I simply could not contact jammie, but jammie has since emailed me personally and i have just sent him a email
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-17 by emma
I was not pointing at you garth Was just stating that some people call wolf rather than actually try to contact you Then when you try to contact them they dont
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-17 by Garth Hjelte
... Right - to be clear I was commenting on Ted s comment that people rely WAY too much on email not on your circumstance. Glad your time was fun! ... Garth
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-17 by emma
Garth it works both ways When they want something from me they want me to answer straight away but wheni email for payment or even parts money I get no
Re: [emax] Re: Jammie emma, i cannot reach
2014-12-17 by emma
I have been away in france at www.vibeystudios.com im sorry if people have not got a response but I was having a tranquil time doing what I like to do With one